Make A Bandsaw Box Clock With Hidden Storage

Make A Bandsaw Box Clock With Hidden Storage - 116

Рет қаралды 164,009

10 жыл бұрын

jayscustomcreations.com/2013/1...
Make a cool clock with hidden storage. A great bandsaw project.
--------------------------------------------------------------
Check out my website!
www.jayscustomcreations.com
Free SketchUp video tutorials:
www.woodworkingwithsketchup.com
Support the site and get some gear!
www.cafepress.com/jayscustomcr...
--------------------------------------------------------------
Like and Subscribe if you like what you see!
--------------------------------------------------------------
Social links:
Twitter = / jaybates86
Facebook = / jayscustomcreations
SUBSCRIBE = / jayscustomcreations
Keek = www.keek.com/JayBates86
--------------------------------------------------------------
Music:
"burn" by Room For A Ghost licensed under a Creative Commons Attribution License.
freemusicarchive.org/music/Roo... Project plans: jayscustomcreations.com/plans/
Tools in my shop (affiliate links):
Bandsaw - amzn.to/2gMHrjd
Bevel gauge (t-bevel) - amzn.to/2eYLB2N
Bluetooth adapter - amzn.to/1GDYgFl
Dado blade - amzn.to/210w6ex
Dewalt planer - amzn.to/1IGqVoz
Dewalt sander - amzn.to/1IGt0B6
Dewalt countersink - amzn.to/1ThxZQi
Dewalt trim router - amzn.to/2istJn9
Dovetail gauge - amzn.to/2bJpxIi
Eclipse quick release vise - amzn.to/1PUkyEW
Engineer square - amzn.to/2bqS0lA
Festool Domino - amzn.to/1IGrQ8u
Forstner bit - amzn.to/2fMph1z
Glu-Bot glue bottle - amzn.to/1LrKulZ
Gyokucho 372 japanese pull saw - amzn.to/1TgnE9i
Irwin Marples 10" blade - amzn.to/1klkIIr
Kreg K4 - amzn.to/1V4LTGM
Kreg DB210 pocket hole machine - amzn.to/1pFvmwU
Kreg Mini - amzn.to/1phH3cQ
Marble router bit or drill bit - bit.ly/1HIAZCA
Megapro NAS Driver - amzn.to/1OH8H8v
Milwaukee plunge router - amzn.to/2gSr5Ci
Mp3 earmuffs - amzn.to/1RF5CZq
Narex marking knife - amzn.to/2ciT7K2
Ridgid miter saw - amzn.to/2h0Xf2s
Router Lift Router - amzn.to/2zVUV2L
Rustic pine Briwax - amzn.to/1EnC0Jg
Ryobi 18v brad nailer - amzn.to/1Q3zZdG
SawStop titanium series blade - amzn.to/1OQUXbr
Scraper BAHCO - amzn.to/1PTR4Ie
12" speed square - amzn.to/1QY7BKg
Spiral router bits - amzn.to/2BnOINX
T-bevel (bevel gauge) - amzn.to/2eYLB2N
Table top hold down clips - amzn.to/2oP1wtw
Tudor brown briwax - amzn.to/1TnDPxC
Wax brush wheel for drill - amzn.to/1PtRYLi
Wood glue - amzn.to/1lZOwfc
Woodriver #4-1/2 - amzn.to/24pY95R
Woodriver #62 - amzn.to/22aF3F0
Social links:
Twitter / jaybates86
Facebook / jayscustomcreations
Instagram= / jaybates86
Mailing Address:
PO Box 33
Mathiston, MS 39752
Want to help support what I do? Here's what you can do:
Buy a Plan: goo.gl/L7wNIF
Patreon: / jaybates

Пікірлер: 120

@Woodentoolcompany2 10 жыл бұрын

Nice job Jay. Isn't it funny how things never go the way you plan.

@MRrwmac 2 жыл бұрын

Jay, Had to come visit some old memories of you in your old shop!

@JayBates 10 жыл бұрын

Awesome. It's a great value. Good luck in Africa!

@richardhyman6981 10 жыл бұрын

Shops lookin' great and the video quality is really awesome on this one. Keep posting these great projects!

@JayBates 10 жыл бұрын

Thanks Dan. Glad to hear that!

@ziggydog24 8 жыл бұрын

Great to watch, like your style and like me you make the odd mistake but get there in the end. I'll be on the beach tomorrow collecting driftwood and sometimes make the odd clock with my washed up material. Thanks for your time from over the pond in the UK.

@JayBates 10 жыл бұрын

Thanks Joe! I appreciate the feedback.

@bigjoemann 10 жыл бұрын

What a difference a good camera, new bandsaw, and great lighting make! Your videos are getting better and better. Good work, Jay!

@ms0099rg 10 жыл бұрын

Jay the videos are getting better every time !!! thanks again

@MRrwmac 10 жыл бұрын

AWSOME work Jay! That clock is excellent. You and your new bandsaw have become one "cutting edge" team.

@JayBates 10 жыл бұрын

Thanks for the feedback man. I appreciate it.

@shamong9 10 жыл бұрын

Nice project, something different. I like it when you share a problem. thanks again.

@majdid1975 10 жыл бұрын

Great Work Jay

@JayBates 10 жыл бұрын

Thanks Kurt!

@notaflightmedic 10 жыл бұрын

Great work again Jay! I am so jealous of your bandsaw!

@richardgruijters6726 10 жыл бұрын

Nice video. Nice to see how you use your creativity to solve praqtical problems :). Like the jig you made for your belt sander, and the dust extraction when your sanding :)

@woodworkingtao4246 10 жыл бұрын

Great project and great video!

@holybatwingsbatman 10 жыл бұрын

I picked the band saw up today, the Grizzly showroom in Bellingham is gigantic. I walked around for an hour just looking at all the machines. Got the saw home, set it up and it's absolutely dead on. Thanks again for the tip Jay!

@JayBates 10 жыл бұрын

Very cool! Remember that a decent blade will make all the difference! I used a woodcraft 3/16" 4tpi skip tooth blade in this video.

@nutuba59 10 жыл бұрын

great video ,brilliant band saw technique and nice looking clock,

@Silent-G 10 жыл бұрын

Nice bandsaw! Great work!

@fluppir 10 жыл бұрын

Cool project man! Enjoyed it!

@JayBates 10 жыл бұрын

Thanks Tim!

@JayBates 10 жыл бұрын

Thanks for the feedback Matt. I'm trying to get better!

@JayBates 10 жыл бұрын

Highland Woodworking 3/16" 4tpi Skip tooth blade. The same blade has made 7 cracked bandsaw boxes and this clock and still cuts great!

@ray-jh8zl 5 жыл бұрын

Great project! I love your kitchen woodshop!! :)

@WatchRepairChannel 10 жыл бұрын

Very nice work.

@malcolmalexander5246 7 жыл бұрын

Nice job. Gives me ideas. Thanks.

@sjbelaire67 10 жыл бұрын

Sweet Project Jay! Even with those so called flaws...it looks great! I am heading to Africa for work for 30 days and will definitely be ordering one of those bandsaws while I am there so it will be home when I return! BTW...just got my Leecraft table saw zero clearance insert today....thanks for recommending!

@JayBates 10 жыл бұрын

Thanks!

@holybatwingsbatman 10 жыл бұрын

Jay, thank you. It's just pure luck that I stumbled on to your video. Not only do they still have the anniversary version but they have it in stock 60 miles from my house and that puts the total cost below $500. Way under. Thanks so much for the info and for all the videos you have done. I'm headed to Bellingham!

@JayBates 10 жыл бұрын

Awesome! Be careful with it. It's heavy!

@josevillanueva6992 4 жыл бұрын

Good job sir. Congratulations. Hello from California.

@riverasbuild943 10 жыл бұрын

great project Jay! Nice finish. Them dark spots give it character anyways it does not look bad at all. Band saw boxes can be easy to a certain degree. I have noticed that too lol. I haven't checked out that saw blade clock project. I will definitely check it out and make one. I ALMOST bought a craftsman saw blade clock lol.

@ConfusionWood 10 жыл бұрын

great work. nice clock

@ExpatPhil 10 жыл бұрын

Lovely Mantle Clock, I think I would give the hiding place a miss, now you've told everyone!!! :-)

@wha64 10 жыл бұрын

I enjoyed this project and would like to try this someday.

@c.m.oliveira5968 2 жыл бұрын

Fantástico o seu trabalho! Parabéns, te saúdo de Nova Friburgo RJ Brasil!!!👏👏👏👏👏

@JayBates 10 жыл бұрын

Thanks

@JayBates 10 жыл бұрын

Very awesome. That made my day :)

@Mitchiedean 10 жыл бұрын

The audio from the new mic sounds really good. Great improvement to your already awesome videos.

@fergusrb 10 жыл бұрын

Man we make a great team !!!!! You like making stuff and videoing it and I like watching them. Ha Ha

@Mr308Gap 10 жыл бұрын

I got like 20 ideas from that, very cool.

@JayBates 10 жыл бұрын

My initial shaping of the clock was a bit over sized. After the front and back were put on I made a final cut to make everything even. The file was to remove the bandsaw blade marks.

@stuffguy7 10 жыл бұрын

Looks awesome If you do another one like this, You should look out for rare earth magnets. they're pretty cheap these days and should hold fairly well.

@punathilthamir 10 жыл бұрын

wonderful

@salahelfurjani2330 7 жыл бұрын

Nice job

@ammagato 9 жыл бұрын

Bravo.

@1954BJohn 10 жыл бұрын

Cool!

@JayBates 10 жыл бұрын

Go Lions!! All tied up in the division now :)

@toolguybak 10 жыл бұрын

Nice job Jay--thanks for posting. I like your clock face much better than the manufactured plates. Go Lions! Brian

@BackyardWoodworking 10 жыл бұрын

Nice project, I need to get a new bandsaw My little saw isn't worth a darn. Thanks Jay

@JohnHeisz 10 жыл бұрын

Great looking clock, Jay and neat hiding place. How much does a vile of ricin weigh, anyway?

@JayBates 10 жыл бұрын

I work maintenance at an apartment complex. My shop is a run down 3 bedroom apartment that they let me use.

@randycosgrove4449 10 жыл бұрын

Regarding the "flaws" in your clock, you need to know that craftsmen such as you don't have flaws, make errors, goofs or things of that nature. We have serendipitous design alterations. Nice project. I like your stuff. Randy Cosgrove

@JayBates 10 жыл бұрын

Ha! Thanks!

@carolbonfim9775 8 жыл бұрын

Show!! gostei de ver ótimo vídeo ;)))

@JayBates 10 жыл бұрын

I wanted to get rare earth magnets but couldn't find any in stock locally. I didn't want to wait for ordering any online so I just got some ceramic magnets.

@monkwerks 10 жыл бұрын

Nice project. Are the number indicators recessed or surface mounted?

@cejkwo100 10 жыл бұрын

Nice. Clock,you should of used rare earth magnets. I use them in my shop and they hold very well

@JayBates 10 жыл бұрын

Surface mounted. I wanted to use drilled dowels but couldn't find any oak dowels locally.

@gianguyen4470 10 жыл бұрын

good

@58Chev 8 жыл бұрын

Great job and idea. One thing you could have used would have been Earth Magnets. 10 times the strength of regular magnets and you wouldn't have to double up on them.

@greyhairedpete 10 жыл бұрын

Jay, really cool project! You've probably been asked this a million times before, but is your shop in a house?

@athiker7209 10 жыл бұрын

Oh cool! I actually have an old 10" saw blade that I could use to make a clock. I didn't want to throw it away. I've been wondering what I could do with it. I even thought I could use it out on the fire pit for a miniature grill for hamburgers or grill cheese sandwiches. Are you hungry yet? Hey, thanks for sharing this video.

8 жыл бұрын

Please, where you buy this watch (Machinery)?

@JayBates 10 жыл бұрын

Not sure exactly but I'm positive it is less than the screws I used to test this ;)

@holybatwingsbatman 10 жыл бұрын

Jay, I was looking at Bosch drill/drivers and found you! Found this video and am blown away by your bandsaw. I was going to buy a band saw on the cheap but now I realize that might be a huge mistake. I haven't looked yet, have you done a review on your bandsaw? Thanks

@JayBates 10 жыл бұрын

Not really a review but an honest look at the saw. Two thumbs up. I think they still have it on sale for $450 jayscustomcreations.com/2013/09/grizzly-g0555lanv-bandsaw/

@JayBates 10 жыл бұрын

Ha! I'll keep doing my part if you keep doing yours!

@metalli445 10 жыл бұрын

I'm not sure if it's been asked or you mentioned it yet but what kind of bandsaw and what size is that? Very nice! Do you resaw your own wood also?

@packer34 7 жыл бұрын

Nice! The only suggestion I have is I would get rid of the Detroit Like T-Shirt! LOL

@JayBates 10 жыл бұрын

No such thing as too much fun with the bandsaw. We're bonding.

@nobuckle40 10 жыл бұрын

Clock looks good. I'm probably not the first to suggest rare earth magnets. They are relatively inexpensive and mush stronger than other types of magnets. You may also be able to get them from your local computer geek. I pull them out of old hard disk drives.

@CameronLienhart 10 жыл бұрын

Looks great! (except the Lions t-shirt)

@nick_uwu9309 8 жыл бұрын

cool ;)

@JayBates 10 жыл бұрын

Grizzley G0555LANV. Full writeup on my website :) I don't have access to much hardwoods but I do resaw whatever I have as needed.

@JayBates 10 жыл бұрын

Ahhh...its life :)

@grantkrieg7015 10 жыл бұрын

So what are you gonna keep in that clock Jay? ;-)

@SuperNathan90 7 жыл бұрын

i like it. i personally would of made the markers a little bit darker.

@fredyfc9857 10 жыл бұрын

good job ... I have a question .... what kind of machine is that you're taking in the second 33? I hope your answer Jay Bates

@JayBates 10 жыл бұрын

It's a thickness planer. Dewalt DW735

@holybatwingsbatman 10 жыл бұрын

Oh, good advice. I have noticed this blade that came in the saw is having trouble getting the sawdust out of the cut. Heck, I didn't even know they made a 4 tpi blade. Where do you buy your blades? If you don't mind I have one more question, I have some hardwood that I want to rip for picture frames, it's probably 1-1/2" thick, I don't even know what this wood is but it's light colored and really heavy and dense. What blade would you use for a 1-1/2" cut in hardwood? Thanks Jay

@JayBates 10 жыл бұрын

wider blades for straighter cuts. Thinner blades for curves. The general rule is no more than 20 teeth in the wood at a time or you will get a lot of burning as the dust is not ejected efficiently. I keep my 4tpi blade in for all the cutting I do. It does leave a not-so-clean cut on thinner stock though. I bought some BOSCH blades from Lowes and they cut like they are sharper than the stock blade but cut like crap compared to my woodcraft blade.

@39knights 10 жыл бұрын

Might have been too strong; but some neodymium (rare-earth) magnets are perhaps 10X stronger than the ones you used. With these you could have used much smaller magnets with greater holding force to achieve your hidden effect. Old scrapped hard-drives are a great source for them; as well as ebay.

@JayBates 10 жыл бұрын

Yes, as a matter of fact I am hungry. A mini grill surface....hmmmm.....

@samuelromero4104 7 жыл бұрын

what kind of blade did you used to make that beautiful band saw clock?? hope to hear your answer.. thanks...

@JayBates 7 жыл бұрын

+samuel romero 3/16" 4tpi skip tooth blade

@samuelromero4104 7 жыл бұрын

i appreciate you jay and keep up the good things

@staalmaffia 10 жыл бұрын

couldn't you have used a flush trim bit on your routertable to make the thin panelss the same size as the clock? instead of using a file?

@luvrboii333 9 жыл бұрын

How did you get it to look shiny ? Sorry might be a dumb question I just recently got into woodworking

@matthewharper170 9 жыл бұрын

Roman delgado he probably sanded to a high grit and then sprayed on what looks like a poly or lacquer

@rodriguesbob100 10 жыл бұрын

Very cool but what prpobably would have been better is some rare earth magnets. May have been a stronger hold than ordinary ones, buy hey still a great project. I love it.

@JayBates 10 жыл бұрын

Yes. Rare earth magnets would have been better. But no place locally sells them.

@rodriguesbob100 10 жыл бұрын

Well that sucks. I have a Rockler dealer next to my house here in Fall River, MA that has them & thats the reason why I thought of them. Regular magnets did the job.

@seansavage4766 10 жыл бұрын

Jay Bates You can salvage magnets out of an old computer hard drive. Each drive has 2 crescent shaped earth magnets. Not everyone has hard drives lying around..but thought I'd mention it.

@HumanHybrid01 10 жыл бұрын

Good work! I am from Ukrain.

@JayBates 10 жыл бұрын

Thank you!

@theraderfamily8040 7 жыл бұрын

Instead of magnets I prob would have used a loose dowel attach to a piece of decorative satin ribbon as a pull pin to release the storage

@31beerman 10 жыл бұрын

Watched this for the hundredth time and noticed something, is that a Steve Ramsey nail through trick @ 5:43 LOL

@JayBates 10 жыл бұрын

Yes, yes it is :)

@mprice7676 10 жыл бұрын

Love the project...might want to blur out the phone number on your white board at 5:45 though ;)

@Itsthatoneguy371 5 жыл бұрын

Is this an apartment you are working in?

@JayBates 5 жыл бұрын

Yes

@christophersayles3380 9 жыл бұрын

you might say that was like clockwork lol

@drail80s 10 жыл бұрын

Neat project. I think those what you call booboos in the wood I would call that character, however have never seen a black band saw before, what kind of saw is that anyway? Thanks

@JayBates 10 жыл бұрын

This is my bandsaw: jayscustomcreations.com/2013/09/grizzly-g0555lanv-bandsaw/