Make a Model Airplane Engine From Scratch Part 1

Make a Model Airplane Engine From Scratch Part 1 - Crankcase and Backplate

Рет қаралды 25,433

4 ай бұрын

Patreon - / jellyfishmachine
In this video we walk step by step through the process of making the crankcase and it's backplate for a small engine to power a remote controlled airplane.
In future videos we will make all of the rest of the parts, and once we have a running engine then it will be time to break out the box of balsa wood, and build an airplane to fly it on!
Plans are available here:
www.adriansmodelaeroengines.c...
Details of the modifications i made here:
• Weaver Modification De...
Some of the tools and supplies I use:
These are Amazon Affiliate links and i will recieve a small share of any purchases.
Sherline Lathe - amzn.to/4cnme7Y
Sherline Mill - amzn.to/4eVRay6
Hand Tools:
Diamond Sharpening Stone - amzn.to/3xFinnI
Files - amzn.to/3ziPSg4
Watchmaker's Screwdrivers - amzn.to/4eKxfSw
Dumont Straight Tweezers - amzn.to/45QGXPo
Dumont Curved Tweezers - amzn.to/3VP45ZM
Magnifier Loupe - amzn.to/3RRvMjr
Jewelers Saw - amzn.to/45TWAFK
Saw Blades - amzn.to/4byOIuA (1/0 - 3/0 for this type of work))
Precision Tools:
Steel Rule - amzn.to/3Y41jmr
Dial Calipers - amzn.to/4bt2O0a
Dial Indicator - amzn.to/3Wf3G4x
Indicator Base - amzn.to/3zm0fjj
V-Blocks - amzn.to/3VKuPun
Odds And Ends:
Anodizing Dye - amzn.to/45IUMzj
Loctite Retaining Compound - amzn.to/3XGpy9W
Oil Bottles - amzn.to/4bpYI9a
Editing Rig:
Computer - amzn.to/3zpG9Vs
Monitor - amzn.to/4cz7iUa
Headphones - amzn.to/4eMtgFe
Some Very Useful Books:
Watchmaking - amzn.to/4cz6bns
Toolmaking - amzn.to/3XN59jG
Clock Repair - amzn.to/4clBe6B
Autobiography of a Superhuman - amzn.to/3VTDR8K
Practical Watch Escapement - amzn.to/3RNNXGR

Пікірлер: 28

@apx5777 2 күн бұрын

This is fine work. I like you're caption about "a quick once over with files to finish off - that finish was perfect you must have spent a while doing that. I'm inspired to try myself.

@gwheyduke 3 ай бұрын

Great job. Nice to see another Model I.C. Engineer using the Sherline equipment. (M.I.C.E.) the international fraternity of model internal combustion engineers! 👍

@JellyFishMachine 3 ай бұрын

"M.I.C.E", i like it!

@HowardAlison Ай бұрын

I'm loving this, having got a Myford ML10 with milling attachment and a load of worn out/broken model airplane engines. Time to start learning and this is a welcome inspiration.

@JellyFishMachine Ай бұрын

Oh man, totally not jeasous of the myford! not at all..... here's a good resource with many useful articles on construction www.modelenginenews.org/techniques/index.html

@pierpa_76pierpaolo 2 күн бұрын

It is the "Lily" crankcase if I remember correctly. I have to check the pattern book . :)

@RustyInventions-wz6ir Ай бұрын

Very nice project. I’m planning to build engines myself. More like steam and stationary engines, but also other engines. Maybe also something like this.

@jackfromthe60s 3 ай бұрын

Nice work

@shanepowers7566 3 ай бұрын

I built one of these in votech machine shop, circa 1983. It used a mixture of diesel and starting fluid, or model airplane fuel.

@RustyInventions-wz6ir 3 ай бұрын

Just found your channel and Subscribed. Very nice work

@JellyFishMachine 3 ай бұрын

Thanks and welcome

@df666 4 ай бұрын

👍👍👍👍👍👍👍👍

@bambangirawan6011 7 күн бұрын

Saya suka vidio anda, mohon translate bahasa Indonesia terimakasih 🙏

@colibriguitars 4 ай бұрын

Yeah!!!

@colibriguitars 4 ай бұрын

yeah again! love your video! I always wanted a sherline late, but then I look at my shot and see my Sanches Blanes and my mini 7x10 Chinese late and quit wanting it... The Mills 1.3 scalled down by .8 is a good way to get a mills .75, small enough for your lathe. Cheers from Mexico

@JellyFishMachine 4 ай бұрын

Thanks! the sherline is unbeatable for the really small work, you'll see the 1.2mm screws i made for the carburetor once we get there in the series. i've never heard of Sanches Blanes, i had to look them up, they look nice! my next project i'm thinking of making the "Gordon Nano" 0.1cc diesel.

@user-rr5je9md7t 3 ай бұрын

Very nice. What lathe is that? Looks really good.

@JellyFishMachine 3 ай бұрын

Thanks. It's a Sherline 8" www.sherline.com/product/4500a4530a-lathe-with-adjustable-zero-handwheels/#description

@user-rr5je9md7t 3 ай бұрын

Tx, shame they're not available in UK.

@user-xm8ud3nn6m 27 күн бұрын

que planos usaste

@JellyFishMachine 26 күн бұрын

Los planes están vinculados en la descripción Desplázate hasta la parte inferior de la página

@user-xm8ud3nn6m 26 күн бұрын

@@JellyFishMachine ok

@DAKguy1941 3 ай бұрын

Are there Plans for this model available?

@JellyFishMachine 3 ай бұрын

Yes, at the bottom of the page are the most recent plans, that i am working from www.adriansmodelaeroengines.com/catalog/main.php?cat_id=213 I made a few changes to the port timing and glow conversion, see my video for details: kzfaq.info/get/bejne/hNalab14zp7ciJs.html

@DAKguy1941 3 ай бұрын

@@JellyFishMachine thanks, even for free. I will ask my instructor if I can make this as part of my apprenticeship:)

@JellyFishMachine 3 ай бұрын

Post Pictures or a video if you do!@@DAKguy1941

@DAKguy1941 3 ай бұрын

@@JellyFishMachine will do🫡