Just nice to have a good ol' 79er again! With 6,3kg/6,3hp @ 79cc it still has some pretty competitive stock numbers on paper ;)
Пікірлер: 91
@mcmc84965 жыл бұрын
My man, and the world's most versatile saw, be it limbing or logging always my first choice. Great video, keep em coming....
@pedruzini795 жыл бұрын
hello dechsi87 did you edit the lid of the HD air filter or is it the original one? I ask, since the HD air filter covers are always so shiny and not dull black. Cool video👍🏻
@Andyshine775 жыл бұрын
Sounds so much better ported! Good running saw.👍
@richevy52245 жыл бұрын
Would be cool to see a comparison of Stihl 462, MS500i and Husqvarna 572 as well as Dolmar 7900 in same piece if wood with same bar and chain.
@JS-oy6nn3 жыл бұрын
7900 will out cut all of these saws. I had mine specifically ported to be a 500 killer so to speak. I call it the bulldozer
@richevy52243 жыл бұрын
@@JS-oy6nn I've seen some pretty stout 500is lately. It would be a cool test to see.
@climbinhawaiian78813 жыл бұрын
Check out Hotsaws101, he's got a video of him runnin a 500i, 572, and 7900 against one another and the dolmar holds it own pretty damn good against the other boys.
@jimbojohnny82472 жыл бұрын
Damn that baby rips after the porting. Alright that's it. I'm getting one too. Even tho I have an echo and husky. Needing me a Makita next.
@markq235 жыл бұрын
Hi Great vid!☺️👍do you do your own mods? Thanks Mark
@joellemay11095 жыл бұрын
I have 3 of them there one of my favorite dolmars
@Logjam55 жыл бұрын
Beast.
@4570Govt3 жыл бұрын
Seems to me that you're getting more pep on the low end, that "brap" when you touch the throttle is a sharper upward curve compared to stock. Did they work on the intake/exhaust timing as well during the port/polish?
@JS-oy6nn3 жыл бұрын
? I would say “yes “
@louisdu33415 жыл бұрын
Hello, really nice video and good porting work ;) ! In your opinion for a stock saw, what is the best choice between a 390 xp and ms 661 CM ? The stihl is more powerful on paper, but the 390 xp seems more "agressive' in the wood. Thanks !
@Dechsi875 жыл бұрын
Depends on personal preferences, both are good saws. Stock vs stock the 661 has a bit more torque in the cut. The 390xp has the better handling and way better air filter system. So overall the 390xp is a more complete package in my opinion.
@richardclark39775 жыл бұрын
Hi mate, I'm in Bavaria working as a baumpflege and have a saw needing woods ported. Do you offer this service? Good work, I have a 36" castanea tree needing cut down. Would a ported Makita 7901 handle this bar? Cheers, schones wochenende.
@Dechsi875 жыл бұрын
send me a pm ;)
@65BAJA5 жыл бұрын
Do these saws still have a carb with adjustment screws or have they gone with some sort of autotune/m-tronic BS?
@MartyInTheWoods5 жыл бұрын
regular carb. Makita / Dolmar has not autotune (yet ;-)
@richevy52245 жыл бұрын
Nice gains made. Looks like 20%!
@Dechsi875 жыл бұрын
Hoped more, but i will try somerthing different in the next one 😉
@dolmar79003 жыл бұрын
@@Dechsi87 if i do muffler mod and take out SLR in muffler on makita ea7900 do I need to adjust the carb or not? Best regards!
@ciphercode2298 Жыл бұрын
@@dolmar7900 yes,it must be richened up,especially on the high side
@owendavies46134 жыл бұрын
I have a makita saw myself and they seem to be very good but the reason alot of people go for Stihl or Hasq is parts availability and parts price. If you can't afford the first two or do not have good reason to lay out for the 'Top Two' a Makita saw is more than adequate for professional use if you pick the right model and to be honest its not because the sawd are not good its more to do with Makita been known for its power tools.
@Warpedsmac4 жыл бұрын
Very true here in Australia. The Dolmar brand is really not known at all. I have two Blue Makitas DCS-34 and Dcs 7900 with 24" bar. "Dolkitas" always cut faster than Stihl because they pull a thinner chain through the wood. Sometimes you actually have to show the label to people who refuse to believe they are made in Germany...in Australia Dolmar is heard as an Asian sounding name!!!.
@julianlaustsen19915 жыл бұрын
what does it mean that it's ported? what is done too the saw when ported?
@em47033 жыл бұрын
The intake and exhaust ports (the holes in the cylinder where the fuel and exhaust fumes circulate through) are enlarged in a skillful manner to increase the amount of fuel and air that can circulate through the cylinder per one cycle, while also optimizing the timing. It means more fuel and air can circulate through the cylinder, lowers temperatures, increases compression and, ultimately, power.
@Dolmar-Rick5 жыл бұрын
Hey there. Was just wondering do you do all your own tuning?
@Dechsi875 жыл бұрын
Yes, machining and porting ;)
@Dolmar-Rick5 жыл бұрын
Cool. Do do you tuning for people? I'd be interested. I've got a few saws I'd like doing maybe😆, there's a few good tuners in the states but the cost of sending from uk would be a lot. I'm guessing you're in Germany?
@Dechsi875 жыл бұрын
@@Dolmar-Rick should be possible, yes I'm in germany. Are you on OPE forum?
@Dolmar-Rick5 жыл бұрын
@@Dechsi87 ope? No don't think so but can shoot you email if you want. Mine is Hawthorn-landscapes@ntlworld.com
@rnilazarev25533 жыл бұрын
👍👍👍
@kopalmuvek.85963 жыл бұрын
What kind of wood?
@jureslegel38775 жыл бұрын
Stock 7900 in my country is 5.8hp and 6.6kg. Same specs as Husky 572xp. Stihl advertises 6hp at 6kg for 462 i wonder how this is going to work in the long run. I have makita 6100 stock love the saw it is enough hp for my 45cm bar I use it for feling and limbing. But if i had an option to use 2saws i wuld use 7900 for feling and something like husky 550xp for limbing.
@Dechsi875 жыл бұрын
i think you talk about the new "7910" version with 5,8/5,9hp. It has some restrictions to the muffler in comparison to the old 7900 to follow new emission requirements, but nothing you can't change easily ;)
@MsMohaman5 жыл бұрын
OMG 😎💪👍👌
@troopygino3 жыл бұрын
Anyone have the problem of the handle mount digging into the cylinder fins and gauging into them ? I noticed it on mine the other day.
@JS-oy6nn3 жыл бұрын
Yep I take sanding wheel on a grinder and knock some off and put it back on
@browning41284 жыл бұрын
👍👍👍👍👍👍
@rossmcclure85785 жыл бұрын
EA5600 vs ms311? Which would you buy for farm work, firewood, cutting big dead ash trees?
@lukep60174 жыл бұрын
Ea5600 hands down
@sundial69192 жыл бұрын
@@lukep6017 yes ! Or maybe echo 501p
@ciphercode2298 Жыл бұрын
Both are good saws,but even maintenance items are harder to find for makita saws whereas stihl parts are a dime a dozen and stihl dealers are everywhere. I have an old dcs520i that was a great saw but parts are obsolete. I've also got a ms310 that I ve used very hard over the last 12 years and the only thing to fail was the ignition coil. A makita will be faster,but a stihl is still a great saw.
@kraftzion Жыл бұрын
Man that sounds good ported!
@lukep60174 жыл бұрын
Can you give me a part # for unlimited ignition coil? I got ea7900 and need more rpm. Thanks
@em47033 жыл бұрын
It shouldn't really matter, just tune the saw while buried deep in wood. You won't come close to the limiter rpm that way and you can get perfect tuning for maximum power. Unlimited coil is only good if you tune outside of wood.
@JS-oy6nn3 жыл бұрын
Put a husqvarna 272xp unlimited coil on it. Pt#587-32-96-01 cheaper, easier to find
@bennyblanko32 жыл бұрын
@@JS-oy6nn really? Thanks!!!
@JS-oy6nn2 жыл бұрын
@@bennyblanko3 yes sir.!! If you really want that saw to cut you should get in touch with the guy that does all of my saws. I’ve got a 7900 he did for me a few months ago and it’s quite impressive. Check out his channel (Kevin LaVanway)
@bennyblanko32 жыл бұрын
@@JS-oy6nn Thanks! Yeah, he sure turns them up!!! Not quite ready to send it out yet. Mine is fairly new, but kind of a dog for 7900 ... but I think gutting the muffler will help - but then there is the step out the exhaust port to smooth - and if you do that, might as well do the transfers and intake, and time the whole thing too ... where to start and stop? I don't want a race saw ... just firewood ... but the muffler sucks on the Makita ones.
@KimballCody5 жыл бұрын
Muffler mod?
@Dechsi875 жыл бұрын
Yes, with a ported and milled/decked cylinder and some ignition advance.
@leesanders88245 жыл бұрын
Dude, I want a 79 whatever so bad. Don't even care what color it is, red or blue.
@crchrdsn3 жыл бұрын
Better get one now. Makita is dropping gas power tools by 2022.
@jamesaugustine333111 ай бұрын
😂 2023 and still making them.
@leesanders882411 ай бұрын
@@jamesaugustine3331 that was 4 years ago...... I have a tree monkey 7910.
@Brian-Outdoors4 жыл бұрын
This must be an older 7900 if it has 6.3HP stock as the new ones are only 5.7HP? I want one of these saws as they look cool as hell and are built very well.
@ChrisGilliamOffGrid4 жыл бұрын
I just ordered one myself. Bigger than any I've ran before, hope I don't cut my own head off.😉
@Brian-Outdoors4 жыл бұрын
Chris Gilliam Man Stuff I ended up buying a Makita EA7900PRZ1 shortly after posting this. Just cut up about 7 trees on my buddies farm this past weekend with it and my Echo CS501P. It is a beast but a little on the heavy side especially after using the Echo! Great saw none the less.
@ChrisGilliamOffGrid4 жыл бұрын
@@Brian-Outdoors Outstanding. I have a job requiring the removal of a bunch of huge pecan trees. I hope I can make money on the wood, cuz that $1,000 saw hurt. 😉
@Brian-Outdoors4 жыл бұрын
Chris Gilliam Man Stuff lol yah they are not cheap.
@agriceliosilva6214 жыл бұрын
Deveria fazer comparativo com sthil de mesma cilindrada e husqvarna também de mesma cilindrada
@southofheaven-gardening Жыл бұрын
What do you mean ported ?
@jureslegel38775 жыл бұрын
It wuld be interesting to see how much 7900, 572xp and 462 weight is with full tank of gass and oil bar and chain on.
@Dechsi875 жыл бұрын
i only have some dry numbers of the powerheads, but i'm sure the 572xp would be heaviest of them, the stihl the lightest one and the dolmar in the middle.
@toddscholze61685 жыл бұрын
You can't compare wet weight. If one manufacture puts a larger fuel and oil tank on for longer cut times, then you weigh it and it weighs more, people will criticize it because its heavier. Most people are too blind to take this in account.
@arpadgyulai55345 жыл бұрын
What mean woodsported? Nice work.
@Dechsi875 жыл бұрын
it means the saw is modified to a certain degree (modification's of cylinder, piston, ignition, carb, exhaust for example) for more power but still has a all day work ability in the "woods" without loosing much durability.
@arpadgyulai55345 жыл бұрын
Thank you!
@Shootrace5 жыл бұрын
@@Dechsi87 And what mods did you do on this Makita ?
@Dechsi875 жыл бұрын
ported intake, exhaust and transfers. Squish is set with a lathe, muffler mod and some ignition advance.
@runningremingtons Жыл бұрын
Son of a beech that's a fast saw!
@JMGeranimo3 жыл бұрын
I have the ea5000, I want this or maybe full beast husky395xp
@JS-oy6nn3 жыл бұрын
I’m sure you realize that just the 395 powerhead weights 20 pounds no bar or chain right?? They are ok saws.
@JMGeranimo3 жыл бұрын
@@JS-oy6nn 17.4
@sundial69192 жыл бұрын
@@JMGeranimo i love the 395 an the 7900 . Would be tough choice but i wonder if the 7900 would win over cause theyre so irresistably Smooth . Never seen aroun here tho
@predatortt76945 жыл бұрын
Ich will auch :-D
@Dechsi875 жыл бұрын
Wo ist das Problem? :D
@predatortt76945 жыл бұрын
Ich hoffe es gibt keins :-D hab Dir ne Nachricht geschickt über MSP
@bennyblanko32 жыл бұрын
@@predatortt7694 Dog will hunt ...kzfaq.info/get/bejne/aNeWadV_rqqwoY0.html
@bennyblanko32 жыл бұрын
So, in the forest are two trees close by ... a beech tree and a birch tree (I usually say bitch tree ...) and a little tree pops up between them. The beech tree looks to the birch tree and says ... I wonder if this is a son of a beech ... or a son of a birch ...) they decide the wood pecker is the best judge, as he tastes all the trees, and can tell them all apart ... and summons the woodpecker. The woodpecker tastest the little tree. He says ... that is neither a son of a birch, nor a son of a beech ... but is the best ash I ever stuck my pecker into ... heh heh nice porting my friend!
@creucomihai34325 жыл бұрын
Super motosera
@musakesedzija79165 жыл бұрын
Imam istu.Znači Bože
@Petrysens5 жыл бұрын
😂😂😂
@Bill-rs3mj4 жыл бұрын
(NO) are not a good option. Can not get parts are serves . All the Dolmar serves and sales do not sale MAKITA. I and others are out getting STIHL WE HAVE PARTS AND SERVES NOW. You have a good saw but hear in NC YOU MAST UP.
@NathanVdV5 жыл бұрын
good job on trying to kill your saw running it wide open for so long on the first tank.....
@johnharrington71165 жыл бұрын
Nathan Van de Velde do you recommend tuning it at half throttle?
@NathanVdV5 жыл бұрын
@@johnharrington7116 no, you tune properly after 5th tank. things need to properly seat themselfs, they come rich from factory to improve break in period. all instruction manuals say : no full throttle without load in the first 3 (to 5) tanks.