Mamiya C330 + Godox AD200

Рет қаралды 3,539

2071photo

5 жыл бұрын

Portrait shoot BTS with Junko (@Junjunjapan) on the Mamiya C330 with Fujifilm Pro400H and a Godox AD200 for off camera lighting. Shooting around Hollywood Ca.

Пікірлер: 45

@mauricio.drugama 4 жыл бұрын

I'm about to buy this camera and I didn't know about the possibility to sync with flash... My mind is blowing right now! Thanks man I really appreciate it

@scottedwards5191 Жыл бұрын

That was fun! Thank you!!

@2071photo Жыл бұрын

Glad you enjoyed it ☺️

@scottedwards5191 Жыл бұрын

@@2071photo Total skill on your part, shooting at night like that!! I'm fascinated by this camera and close to taking the plunge. I just happen to have two Ad200s... :) But honestly, first... I need to find a good copy. Prob buying from some of our Japanese brothers. Peace!

@depotmsa2362 3 жыл бұрын

this was so good !

@ThisHolographicLife 4 жыл бұрын

Yo this is so sick

@ebreevephoto 2 жыл бұрын

OK that was sick!!

@2071photo 2 жыл бұрын

Tysm for watching ☺️✌🏽

@ChristopherVisser 5 жыл бұрын

Too dope.

@2071photo 5 жыл бұрын

Yo thank you Chris Visser this shoot was a blast ☺️

@AMarsh-hg9wr 3 жыл бұрын

I have Ad400 and C330, how do I set it up?

@mauricio.drugama 4 жыл бұрын

Could you please tell me the name of the sync cord you're using? In also have a good system

@2071photo 4 жыл бұрын

Mauricio D'Rugama Im not sure of the exact name it’s really just a normal sync cable for strobe but a short version.

@danielshavit5595 2 жыл бұрын

On the lens set it to m or x ? when you shooting with the flash

@2071photo 2 жыл бұрын

Always set to X

@redsneaks56 8 ай бұрын

Hi! What lens were you using may I ask?

@2071photo 8 ай бұрын

It’s the 80mm 2.8 blue dot.

@gilmarangelosouzaarancibia1515 4 жыл бұрын

Hi, how did you connect the godox with the camera?

@2071photo 4 жыл бұрын

Gilmar Angelo Souza Arancibia I used a sync cable for the wireless transmitter to the camera and that’s all you need. I would test Fire it first before loading film to make sure the sync port works with transmitter

@gilmarangelosouzaarancibia1515 4 жыл бұрын

Niceeee, thank you very much!

@brianbunting4053 4 жыл бұрын

Do you think i can sync a Mamiya 7 with the same technic? Is the same? I have the x-pro too. thx

@2071photo 4 жыл бұрын

Brian Bunting yeah it should work too, I’ve used this with all my cameras no problem

@brianbunting4053 4 жыл бұрын

2071photo ok i just bought a 2.5mm jack cord to PC sync. X-pro to the camera sync. I think it’s the right one no? Already bought it but maybe it can helps someone out. Thx again for your response

@2071photo 4 жыл бұрын

Brian Bunting sounds like the right one to me, I purchased the same one. I would recommend using gaf tape to keep the cable plugged in depending on how lose it is. Also test it without film first to make sure it fires consistently.

@ashleyholstein7589 4 жыл бұрын

Did you use the Xpro trigger?

@2071photo 4 жыл бұрын

Ashley Holstein the original xt1 tiger but either one will work I’ve tested them both

@ashleyholstein7589 4 жыл бұрын

Amazing! Thank you. I was getting a sync cable to test out this setup with the 645 but I love the c330. It feels like an added bonus to do both.

@RocketinExile 3 жыл бұрын

How did u meter please? Great work man.

@2071photo 3 жыл бұрын

I just guessed exposure with the flash this time from prior experience but I normally use a sekonic light meter or if the flash has a built in chart for exposure on the back I use that as well.

@RocketinExile 3 жыл бұрын

@@2071photo Thank you