✨ MAYTAG NEPTUNE DRYER WONT HEAT

✨ MAYTAG NEPTUNE DRYER WONT HEAT - EASY FIX ✨

Рет қаралды 72,273

Quick and Easy - 5 Minute Appliance Fixes

4 жыл бұрын

MAYTAG NEPTUNE DRYER WONT HEAT-EASY FIX
How to diagnose and Fix your Maytag Neptune Dryer that leaves the clothes wet.
Link to order new igniter: amzn.to/35n0jdU
Click here to order a new thermal fuse: amzn.to/440jGsr
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFixItGuy.com
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our KZfaq Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@scottthefixitgu
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu

Пікірлер: 55

@user-bh7ul1iz4o Жыл бұрын

Thank you for this video! Mine was the igniter! Couldn't have done it without this video.

@QuickAndEasy5MinuteAppliance Жыл бұрын

Thanks so much James😊👍

@tinnerman14paul43 2 жыл бұрын

Very good video. I actually worked for Maytag in Newton, Iowa in skilled trades for 17 years before Whirlpool purchased them and promptly closed the home plant. I work on many aspects of the Neptune line when it was introduced as well. Would just like to add that touching the igniter coil with your bare hands can cause an immediate failure of the coil from the oil on your hands. So either be very careful to not touch it, or use cloth or nitrile gloves to prevent this from happening. I learned this the hard way and then got the advice from our on site repair that was called "Red Carpet" to not touch the coil. My dryer is currently not lighting properly and I suspect that it's the coil. My dryer is 23 years old and doing fine otherwise. Thanks for the good info!

@QuickAndEasy5MinuteAppliance 2 жыл бұрын

Great Info. Paul, thank you😊

@pauldoorn6101 3 жыл бұрын

Thanks for your instructional video, well done and is perfect! Because of your video the ignitor replacement fixed my gas dryer! Thanks again!

@tomdixon113 Жыл бұрын

Thanks for the great video! This was exactly what was wrong with my daughter’s dryer. Followed your instructions exactly and fixed it without fuss.

@QuickAndEasy5MinuteAppliance Жыл бұрын

Thanks so much Tom, 😊👍 here’s a link to Venmo:venmo.com/u/Scott-Flint-1

@theferalprincess. 3 жыл бұрын

Vid is great--you get right into it and go at just the right pace--NO RAMBLING or FILLER. Thank you!!!!

@QuickAndEasy5MinuteAppliance 3 жыл бұрын

You’re very welcome😊

@c.jordan5710 3 жыл бұрын

Thank you! Igniter was my problem as well. Much appreciated!!

@Malibyte56 2 жыл бұрын

Yep. Quick, cheap fix. My igniter was bad also. Thanks VERY much for your video! Much appreciated.

@QuickAndEasy5MinuteAppliance 2 жыл бұрын

You’re most welcome😊

@18airwick 3 жыл бұрын

Very clear instructions and useful tips!

@chrischase3015 Жыл бұрын

You are awesome man! Thanks so much for posting this. Precisely our unit, and you have saved us from having to hand another $100.00 to American Home Warrantee!!! I have liked and will share with my network. Again, thanks so very much for this great How-To....

@QuickAndEasy5MinuteAppliance Жыл бұрын

Awesome Chris, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzfaq.info/love/GpInAejvpfVVE4FHB_L-Dgjoin You’ll get Live Appliance help when ever you need it.

@AnneBaird-yf7fk Жыл бұрын

Totally worked!! Thank you for saving me $$$$!

@QuickAndEasy5MinuteAppliance Жыл бұрын

Awesome Anne, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzfaq.info/love/GpInAejvpfVVE4FHB_L-Dgjoin

@kickinatthedarkness 2 жыл бұрын

Thanks for the video. Good info. Mine lights, flames for 20 seconds. Stops for a couple of minutes, relights for about seven seconds, stops for a couple minutes, and then delights for six seconds, etc. Any ideas?

@dougedwards3206 2 жыл бұрын

Thank you so much for this easy to understand instructional video. You save me a great deal of money ordered the part change the ignitor now my dryer works. Cylinoid's ame with the kit I'm gonna keep them in case I need to replace them.

@QuickAndEasy5MinuteAppliance 2 жыл бұрын

Good idea Doug, You may need those solenoids later on.

@fdog2304 Жыл бұрын

Helpful in that I was able to quickly verify my igniter was still working and I was getting flame. After that though (this just after having replaced motor, belt and the front felt the previous day), it turned out the clicking/grinding noise that periodically followed (turning on and off while "drying" was in progress) was likely the ignition solenoid coils not working right (and thanks to a couple of reviews at amazon with mentions of such noises). This confirmed as also after a while it became evident that the heat stopped working after a several minutes also. (Spent all last night drying two sets of rugs 20 minutes at a time and then letting things cool down for a bit and doing 20 more minutes etc. Long night!) So anyway coils just replaced, will soon find out if it's all good now…

@QuickAndEasy5MinuteAppliance Жыл бұрын

Nicely done👍

@aileenfitzpatrickquilts 11 ай бұрын

Thanks!

@QuickAndEasy5MinuteAppliance 11 ай бұрын

Thanks so much Aileen😊❤️👍

@willielombos9352 4 жыл бұрын

Do you have a link on the angle tool you used to remove the 1/4 inch machine screw?

@QuickAndEasy5MinuteAppliance 4 жыл бұрын

It’s made by Dewalt and I got it at Home Depot for about 25 bucks

@algonzales1809 3 жыл бұрын

Many thanks...had a repairman come and look at it as it wasn't heating...he claimed he couldn't get parts right now and had to order them from from the supply house and they alone would be over $100 and he would call me back when they arrive..load of bull...that was 2 weeks ago and no phone call back from him..guess what..he's not getting paid for his service call either as he thinks and will get a poor review on google and yelp from me.. I ordered the coils from Amazon for $16 bucks and had it up and running in short order.

@florapost8901 5 ай бұрын

Good for you! 👍👍👍

@yelenagordiyenko7771 11 ай бұрын

Hi, Scott! I have a 20 yo MAH5500B. The igniter glows, the flame comes on for about a minute, then shuts off. What is the most likely culprit here? I don't have a multitester to help with diagnostics, plan on getting it tomorrow. But if it sounds like a sure case of (insert the name of a burned out part here) failure, I'll just order it right away... Cheers!

@QuickAndEasy5MinuteAppliance 11 ай бұрын

Hi Yelena, I’d say it’s time for new primary and secondary gas coils. You might have a clogged vent tube. That causes overheating and will shut off the flame.

@neyney028 4 жыл бұрын

Hi. We have the exact same dryer shown in the thumbnail (Maytag Neptune). We have to press buttons multiple times for the dryer to perform the action. The plastic above the electronics screen gets hot. The dryer beeps randomly. And sometimes it stops running on it's own. Will this fix those issues? If not, what would you recommend? Thank you so much for making these videos!

@QuickAndEasy5MinuteAppliance 4 жыл бұрын

Hi Nathalie, I think for your dryer you need to replace the control assembly. You may only be able to find one on eBay but I think that will fix the problem.

@neyney028 4 жыл бұрын

@@QuickAndEasy5MinuteAppliance I found some on Ebay. Thank you for the suggestion :). I can obviously check elsewhere for an installation video, but do you have one I can watch? I'd love to give you our views! Haha

@senorsnapio 3 жыл бұрын

Hey there! I have a Maytag Neptune and everything seems to work except that it appears to be frozen. None of the buttons can be pressed, but all the lights work. I cannot turn it on/off or change settings at all. I had to unplug it since it just stays frozen on if it's plugged in.

@arandomgentleman3051 3 жыл бұрын

Check to see if your belt has given away.

@rickjones1729 Жыл бұрын

I can’t find my model number on amazon for the ignitor, MDG4000AWW, does it matter?

@QuickAndEasy5MinuteAppliance Жыл бұрын

Here you are Rick:amzn.to/3PBecA8

@kkbeautysupply808 3 жыл бұрын

Hello, HELP! I did what you said without testing the fuses I don’t have a tester to do so but I noticed the igniter was not lighting up. So I bought a new igniter & everything was fine. The kids and I started washing like crazy until this morning, the igniter is out already. So my question is, do you think there’s something that caused the igniter to blow out so quickly. Which component would cause that? Please & thank you!

@QuickAndEasy5MinuteAppliance 3 жыл бұрын

Time for a new thermal fuse .

@garrettlees7497 2 жыл бұрын

Hey, how'd you know it wasn't the solenoids?

@QuickAndEasy5MinuteAppliance 2 жыл бұрын

I could hear the solenoid click but the igniter never glowed. I had 110Vac going to the igniter but no glow. If you don’t have 110 volts then the coil should be replaced.

@garrettlees 2 жыл бұрын

@@QuickAndEasy5MinuteAppliance Ah ok thanks. As long as I have it opened up (20 year old unit), do you recommend replacing just the failed part (let's say igniter) or the coils as well (even though they might still be ok, but again, they're 20 years old)?

@seemorebutts3428 2 жыл бұрын

Dang it! I hate to be one of these bad guys because you even look like a cute couple in Hawaii as I am on the Big Island with my Filipina. But I don't want people to struggle. You showed that your ignitor wasn't glowing in video, but your tester was plugged into it and so this would give someone the false impression that it's the ignitor. But you need the ignitor working so you can see if the coils are failing which is the next step. Hope this helps anybody if they don't watch other videos. Aloha, Paul da Plumma

@Foczee 5 ай бұрын

My igniter works for about 30 seconds then fades out. I hope the igniter is the problem. I suppose it can be a connection to the igniter problem, dk. Anybody??

@QuickAndEasy5MinuteAppliance 5 ай бұрын

Do you ever get a flame? I think you need to replace the 2 round black gas coils.

@Foczee 5 ай бұрын

Thank you good sir. I went ahead and ordered the coils and igniter. I'm gonna replace both as I know the igniter is old and probably ready to go. Thank you again 🙂