Corroded disc shields on your Merc? How to replace the rusted shields WITHOUT removing & dismantling the hub or getting the bearings pressed out.
Пікірлер: 30
@liamcinq2 жыл бұрын
Thanks for the upload, I've came across this problem and all my experience is in FWD cars so I hit the part where the shield can't clear the hub flange (oh darn) then researched just how much stripping you need to get the cheapest part off and it's incredible!
@MrJolem4 жыл бұрын
So glad I've watched this, after replacing brake pipes as your other video shows, I've also had to replace backplates & shoes. Thanks for the tips.
@mikesmithroller4 жыл бұрын
Sounds like your Merc is about the same condition as mine! Have you checked the front plates? I had to do all 4 of mine at the same time.
@thomasdurkan88962 жыл бұрын
Exactly what I needed! I have all the gear, quality street lid, skint knuckle stuff included😀
@mikesmithroller2 жыл бұрын
Brought me a smile. Thanks fella.
@tonyellery69182 жыл бұрын
That’s the way to do it, no problem job done,excellent video 👍
@valtarijunkkala Жыл бұрын
Thank you so much! Definitely saved my day!
@MrNhunzi2 жыл бұрын
I lost hope when I took the disc off. Thanks for brilliant idea. I wonder how many people have seen this video after dismantling half of their cars.
@razvipetrica71863 жыл бұрын
Oh boy, you are a life saver, thank you
@philmarino93862 жыл бұрын
Now that's what I call DIY !!.....although my local mechanic did it for me 😉...excellent 👍💋
@spencerclassen7622 Жыл бұрын
Thanks to this video was able to do my clk500 thank you
@williamkennedy5492 Жыл бұрын
I have a W212 and mercedes just replaced the rear subframe free of charge under extended warranty , however they did sting me for other work, BUT they never mentioned the rear disc mud guards had holes in them, Its a later model than yours so i hope i can do the same as you as there is no way i want to pull the hub off, Many thanks its what i needed to see.
@ruhsatigoek16322 жыл бұрын
Good video super Thank you
@rafaljodlos7184Ай бұрын
Klej do szyb samochodwych tylko trzeba odtłuscic.
@MrJolem4 жыл бұрын
Brilliant idea, save a lot of work
@mikesmithroller4 жыл бұрын
Thanks ... hope it was useful
@nimrodfly6262 жыл бұрын
Brilliant thanks!
@cwillatts2 жыл бұрын
I guess this would work on the W202 as well as the setup looks identical. Will order some cheap back plates to butcher and get this done as I fear there is already a lot of rotational play in my handbrake lol. RIDEX brand off autodoc are cheap :). The rear bearings frequently get damaged removing them to do this job and it's a false economy not to change them anyway. However I fail to see the point in destroying/ changing bearings which have no play and make no noise just to change a cheap bit of tin plate. Thanks for the video :)
@danielhabte7847 Жыл бұрын
Excellent
@MicroAngelo13 жыл бұрын
Genius!
@ParFektion4 жыл бұрын
Thank you very much for this! I think I will do it this way too. What adhesive sealant did you use?
@mikesmithroller4 жыл бұрын
Hi ... it was one of the modified polymer sealants, I think I used Puraflex 40 although that's only because I had some laying around. There are no rattles from the back end, so I guess it has done the job! good luck.
@mickramo4984 жыл бұрын
back plate one cut at narrowest point with a hacksaw no grinders
@nelalesana30702 жыл бұрын
Evalaner 2008 3.5 hou to replace well peuring
@sycarter2024 Жыл бұрын
hi what adessive did you use please
@mikesmithroller Жыл бұрын
Hi ... it was one of the modified polymer sealants, I think I used Puraflex 40 although that's only because I had some laying around. There were no rattles from the back end, so I guess it has done the job! good luck.
@mickramo4984 жыл бұрын
i got two back plates from mercedes delivered £16. 60 for my veto
@mikesmithroller4 жыл бұрын
worth checking with your Merc dealer for sure, they can sometimes be surprisingly cheap. I just replaced a (genuine) rear lower control arm on mine for less than some of the used ones on eBay.
@patricklucien167910 ай бұрын
PATRICK
@patricklucien167910 ай бұрын
MERCI BEAUCOUP super cela m a été très utile thank's