I just got this impact wrench yesterday from Home Depot for automotive work, and I’m really looking forward to using it soon. I wish Ryobi and Ridgid would have kept the tri beam lights.

The hollow rectangle steel beam was giving or compressing when torqued so you didn't quite put as much torque to those nuts as you might think. Better test is to use a solid steel bar and bolt down the nuts with that 1800 ft-lb wrench.

This tool is a beast and I love it! Well worth the money!

Great channel. A lot of useful things. Hello to you guys.

FYI, using deep well sockets will allow the impacts to perform to their maximum ability.

"you gonna put up my plants" nah step off you're eating into my leisure time woman!!!

If you had to choose only 1 Milwaukee impact wrench: Choice is between the 3/8” 2960 or the 1/2” 2962 for a DIY with passenger cars and small truck…What would you choose?

Hey, get the bosch impact driver/wrench. A BEAST of a tool.

You can get a 1in drive 200-1000 ft lb torque wrench for 1k~ his torque gun is also limited to like 600or 700 ft lb

Bad ass little gun

Using a torque multiplier ($150-300) and a torque wrench you can accurately put those bolts to 800 ft lbs of torque. Don't need the $4000 tool.

Nice video. Like to see up against the Makita XWT17Z.

can you add 3/4 inch lag screws for the log obviously i feel like the sizes your using isn't very challenging what are you using 1/2 inch

Weheey, red ryobi does pretty well!

Good on the lag bolt testing. I run 1/2 lags all day with the mid-torque. Would be nice to try testing some self tapping concrete anchors too.

There are some people trying to take your videos and use them as their own. They make them about 4 minutes and put terrible music on them. They are trying to pass your videos are theirs. They are completely copy writing your videos. I hope that you will be able to find the Chanel's that are doing this. I have been reporting their videos and hopefully they get banned.

Why can’t you just buy a normal torque wrench? Why on earth would you need one in the range of 5k?

Where is the video of hilti impact wrench vs milwaukee mid size impact wrench? How about a test on the best midsized impact wrench

I have the ridgid brushless 1/2" with similar specs and it is a beast. Puts my grandpad older pneumatic ingersol rand to shame.

Awesome video Dave

I’d like to know what the torque readings are using the small batteries I know everyone wants to see it with the big batteries but I’d like to see what they might be using smaller lighter compact batteries

@mancavertools Get a torque multiplier you can do it with that cheaper

You would be better off getting a skid more and wilhelm, with regular And reverse thread pitch. you can compare impact wrenches, up to 1500 ft lbs, and it would be slightly less expensive than the hytorq gun. The hytorq is limited to 700 ft lbs. meaning you can’t test high torque impacts.

Funny how milwaukee always comes out with these updated and more powerful tools while dewalt only does it when they're tired of getting people asking for newer ones

Got the tool getting the bat

I would never use that impact wrench in my lifetime. But , I can't wait for the New DeWalt 12v Xtreme impact wrenches to come out .... 👍

Holy Moley ! That 12 Ahr battery is larger than the tool! Great for the video, but I don't think that is going to be very practical for daily use. At least not automotive.

Yeah Milwaukee has a lot of power

I like your videos. My boy noticed the among us figure on your cabinet, he wants one, he plays among us all the time 😆

I've been meaning to ask this for a while now, but what's going on with your mic whenever you do an impact vid? I don't mind it, I'm just curious as to what's going on that makes it cut out when you run the impact nearby. Thanks for the vid!

Professional!!!

Im happy with my gen1!

Hey wats up MCT! are you going to get Ryobi P262 1/2 impact wrench anytime soon? I would like for you to test it out and see what you think of it

Is it easy to swap anvils on this impact?

Now did I say it like that? I said it only with love!!!

Can you take off nuts and bolts 🔩 off scooter let me know thanks

Tekton make 1/2 drive all the way to 38mm

I have found a channel that is stealing yours and others videos about tools, his channel name is ''Turayev Zukhriddin''

@ that intro i also tell my 1/2 Wrench I love you so much.then i kiss the box after.,and then get random chores from my wife after she catches me with my new tools. ----> I rightly assume you weren't telling your wife you love her so much then kiss her, because that would be awkward on a Tool video. :D

Hi

😆🍩☕😊

Only makita can beat this one

A waste of money it's only 8% more powerful than gen 1 if you're going to make a new tool it better be 25% more powerful minimum

this is really a crude tool!!!

First

How marny milwaukee 2962