Motion Sensors Tested and Reviewed! Worst and Best Zigbee PIR
Рет қаралды 70,386
Күн бұрынTesting a handful of Smart Home Zigbee Motion PIR Sensors for automating your home. All the sensors are tested in realtime together so you can find the best and worst one of the bunch. More below....
⚡PIR Sensors (Top 2 listed first)
Linkind (Amazon) geni.us/qXgf0
Phillips Hue (Amazon) geni.us/KjX4e
Sonoff SNZB-03 geni.us/8c1jEwo
Aqara/Xiaomi geni.us/rMcDQK
Third Reality (Amazon) geni.us/PRNxTSx
Agshome/Tuya geni.us/K6WrQo
Iris - ebay.us/9fAuux
Aqara Sticky Issue - community.hubitat.com/t/xiaom...
⚡Products We Use/Recommend
Amazon US - amzn.to/2YZNDeO
Amazon UK - amzn.to/2TnG2R4
Amazon CA - amzn.to/2JWsNq5
⚡Be Social!⚡
Main Website - www.digiblur.com
Discord Chat - discord.digiblur.com
Patreon - patreon.digiblur.com
Join / @digiblurdiy
Facebook - facebook.digiblur.com
Instagram - instagram.digiblur.com
Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of purchases potentially helping with future video projects. Thank you! As an Amazon Associate I earn from qualifying purchases.
00:00 Intro
00:51 The Nope
01:42 The How
03:03 Phillips Hue 929001260762
04:43 ThirdReality 3RMS16BZ
05:54 Linkind ZS1100400-IN-V1A02
07:19 AGSHome Tuya RH3040
08:17 iTead Sonoff SNZB-03
09:15 Iris IL07 V3
10:22 Aqara/Xiaomi RTCGQ11LM
11:12 Wyze Motion Sensor V2
12:34 Testing
14:40 Cooldown and Specs
15:55 Sonoff Sensor Issue
16:53 Closing Thoughts
18:15 The BEST Part!
@jimbrewer5821 2 жыл бұрын
Great video! Really appreciate the thoroughness by covering the cool off period since it is such a factor in assessing one's use case. 😀
@digiblurDIY 2 жыл бұрын
Thanks! Little different outro this time.
@adamrobinson1415 2 жыл бұрын
Cheers for that, really useful, didn't realise how good the hue indoors was. I've never really compared them. I mainly use the hue + aquara ones, the hue outdoor is awesome too. I use it indoors in the office and garage because I find it the best, battery, connection (hue use good radios) , range etc. obv use it outdoors too. Aquara is awesome because you used to be able to get them for less than 5 quid a pop (around 5-6 dollars) so i've scattered them round the house and slowly replaced them with hue where I felt needed. They don't seem to like connecting to other routers that they weren't paired with though which is a big reason for swapping some to hue but the ones round the hub (phoscon/deconz) in the core of the house I have kept, depending on the model so ymmv. Cool off period on the aquara ones are a pain, I did hack some and lost one one the way due to my dodgy soldering, most of my light automations are over 2 mins tbh so it's not a massive issue but they can work, with phoscon you need to do an api call to set the cooldown below the default as every time it restarts it resets to default.
@d_sellers1 2 жыл бұрын
Great video. Subscribed. I really liked the demonstrations with the sensor detection overlayed. That was very helpful. I have one Philips Hue sensor and a couple of the Sonoff sensors. I noticed some weird stuff with the Sonoff but wasn't sure what was going on. Your video pointed me in the right direction so I know what to look for in the future. The Philips Hue is great, but, like you mentioned, the price... Mixing and matching depending on needs is a good recommendation. I'd suggest the Hue in "more important" areas and something cheaper in areas such as a garage or laundry room. Also, knowing the cool-down times will help when making automations such as turning lights off after motion has stopped.
@zzafarr 2 жыл бұрын
Such a great video comparison, exactly what I was looking for !!! Informative, precise, no stupid music/animations .... focus is purely on what many people are interested in. And I do not care if the video production is not the top notch, I am looking for the information, not video production. Thanks again for such a great informative video review.
@digiblurDIY 2 жыл бұрын
Is that a passive insult to my zero skills one man crew of video production? Whatever it is I will take it as I probably said directly worst stuff at myself. I do try to keep the fluff to a minimum as I do talk a bit much at times. All jokes aside, thanks for the comments on my bit of different video style.
@zzafarr 2 жыл бұрын
@@digiblurDIY lol, no you are great, exactly what i need, I just hate when people focus more on the other things than actual information.
@digiblurDIY 2 жыл бұрын
Fully agree!
@desparky 2 жыл бұрын
I bought the Phillips Hue when they were on sale at Bunnings here in Australia. They work great both inside and outside (under the veranda). I mounted them high in the corners of rooms and stuck a small piece of plastic card below the lens to stop my cat triggering them. Great video by you and your little helpers (including the 4 legged one). Keem up the good work guys.
@vinct7023 Жыл бұрын
If I recall well, Philips Hue motion sensor does work only with Philips Hue bulbs.
@desparky Жыл бұрын
@@vinct7023 they work in ZHA on Home Assistant.
@digiblurDIY Жыл бұрын
Work fine with Zigbee2mqtt here.
@JesseG2573 2 жыл бұрын
Great comparison video Travis. I have the Aqara in a spare bathroom. I know the long reset (cool down) is a pain, but it works great there with the added 2 min if needed delay in the automation. Plus no one gets stranded in there. My Iris MD'r in the garage has been there for about 6 months - no issues (eBay 2 for $17) Nobody touches the light switch so it's a BIG win!!!!
@ONI1013. Жыл бұрын
The Aqara P1 (newest version) can now adjust cooldowns, as well as adjust motion sensitivity. Pretty nice for the price.
@WightonIT 2 жыл бұрын
Really helpful to see them all in action. I was lucky and picked up a couple Hue sensors in a Prime deal for about £10 each. I guess you get what you pay for in this instance - Not always true with Hue devices - i.e. Outside lights 🤑 Often wondered if there was better. I'd say after this our personal preference say's they are still the right one for our home and lifestyle. The temp and lux stats available HA is an added bonus. I really wanted to invest in the Sonoff kit and was disappointed when I read reviews about the detection logic. Turning the lights off in the kitchen while we are cooking would be a major hit to the WAF. Another 'motion sensor' we have used is the ANNKE C800 for lighting automation ☺
@calebjpryor 2 жыл бұрын
This looked to be one of your funner videos to do with your son. Just awesome. I think your next video should be about proper placement of motion sensors. I was ready to throw away some of my motion sensors just because I implemented them wrong. I've learned not to put them on the ceiling pointing down and always have an adjustable bracket to dial things in. Also not to point them at a heat vent. They trigger when the heater would come on
@digiblurDIY 2 жыл бұрын
Lol. You would watch the out takes? It was interesting at times. Luckily my heat vents are on the ceiling so I haven't run into that just yet. Great idea!
@calebjpryor 2 жыл бұрын
@@digiblurDIY of course! The outtakes are always worth the watch
@jefflambert4243 2 жыл бұрын
I think I have 20 Phillips Hue. By 20 times and cry 20 times. 23 I guess. They work well and I can’t imagine how many times they have saved me flipping a switch. Using them with Zigbee2MQTT. Awesome combination.
@denvansanten 2 жыл бұрын
I have 8 aqaras with the hardware mod done. It goes to clear after 5 sec and battery life is still very good. Almost 2 years now.
@digiblurDIY 2 жыл бұрын
Nice! Thanks for giving a long term report on that.
@ronm6585 2 жыл бұрын
Nice! Thanks Travis. 👍🏻
@Tommyownzz 2 жыл бұрын
I am using cheap 443mhz sensors by DIGO bought from aliexpress. Detection is instant and cooldown is about 3 seconds. They are great.
@cjsalzano 3 ай бұрын
And you'll take it thanks for the great video. other than the hue outdoor, are any of the sensor suitable for outdoor use or are they all specific for indoor use?
@digiblurDIY 3 ай бұрын
Thanks! I haven't seen any other than the YoLink motion sensor but that needs their hub.
@rohankoripalli 2 жыл бұрын
Been using the Iris sensors and really like them but I'm thinking about replacing them with something that has a shorter cooldown time. Unfortunately it looks like the Hue is the only quicker one so I'll probably keep waiting for something else to come out or keep an eye out for a deal on the Hue sensors
@thepfleidi 2 жыл бұрын
Hey Travis, thanks for the great comparison! You mentioned that you could configure the sensitivity for the Hue motion sensor. Do you have any pointers on how I would do that with ZHA?
@digiblurDIY 2 жыл бұрын
Sorry, I don't, in Zigbee2MQTT it is just an entity and on the dashboard for the device.
@mikosoft 2 жыл бұрын
I had an opposite issue with Sonoff, it triggered when there was no motion. Also it for ZHA stuck some time after inclusion
@doubleu2170 2 жыл бұрын
Thank you ! Good job !! I will go with the Philips.
@digiblurDIY 2 жыл бұрын
Thanks! Great sensor indeed
@Hans-gj3vk Жыл бұрын
Thank you very much. This was very helpfull.
@digiblurDIY Жыл бұрын
Glad it was helpful! I tested some more here later kzfaq.info/get/bejne/p72GldaLqNCac40.html
@ThijmenCodes 4 ай бұрын
Thanks! Fun style of video too.
@TheSlimHim 2 жыл бұрын
I'd love to see a comparison of the old vs new philips hue as well as the outdoor one.
@digiblurDIY 2 жыл бұрын
Sooooon
@bryanwarman 2 жыл бұрын
I'd love to see you mod the Aqara and do some more testing with it.
@circuitdotlt 2 жыл бұрын
check my comment about the Aqara.
@lindsayreid8347 2 жыл бұрын
I agree the Philips Cue is ex[pensive but it really is the best and most versatile with the the "cooldown" adjustable from just a second to hours via Zigbee/MQTT, the sensitivity is also adjustable (low, medium, high), it also does lux and temperature and the led can be enabled/disabled. I fought with other sensors and did what you suggest - use the Hue (I also use the outdoor Hue) and use cheaper ones where I don't need the additional features. IKEA do quite a good Zigbee motion sensor called the "TrRadfri" - It has time and sensitivy adjustment on little knobs hidden in the back but the "cooldown" is fixed. Hope this helps. Another great video - many thanks.
@janhetych8179 2 жыл бұрын
How can be LED disabled?
@digiblurDIY 2 жыл бұрын
I wanted to include Ikea but they were out of them when I was in the area near a store a few months ago. I checked a few times since then and they aren't available via online orders.
@lindsayreid8347 2 жыл бұрын
@@janhetych8179 - The settings are exposed in Zigbee2mqtt.... temperature Measured temperature value 19.87°C occupancy Indicates whether the device detected occupancy Clear battery Remaining battery in % 100% illuminance_lux Measured illuminance in lux 277lx illuminance Raw measured illuminance 24431 motion_sensitivity High/Medium/Low led_indication On/Off Blink green LED on motion detection occupancy_timeout 5 second linkquality Link quality (signal strength)
@janhetych8179 2 жыл бұрын
@@lindsayreid8347 Thank you, I thought I can disable red blink too, not just green one.
@davidsiebrecht8612 2 жыл бұрын
I really liked the Wyze sensors that I got on your recommendation, but I think they end up being more expensive than something like Hue because I have had to replace them so often. I think I will try the Linkind sensor for motion, but what do you recommend for a reed sensor that I had hooked up to my mailbox door?
@digiblurDIY 2 жыл бұрын
Besides the stupid branding on the side, the linkind door sensors work well and are pretty quick. These are also pretty good but have a delay sometimes by another second but for a mailbox is fine. ebay.us/P0vpgb Those Wyze sensors were so nice for the price but the whole bricking issue combined with them not made anymore kinda kills it now.
@Al-gx7ys Жыл бұрын
The cool down time for the Aqara one can be lowered to 1 second through Zigbee2MQTT if needed. 90 sec is just the default value.
@digiblurDIY Жыл бұрын
Not really. I tried that. That just makes Z2M report back quickly while the sensor is still in triggered mode. There is a new Aqara sensor with the dual batteries that allows this to be changed but it didn't do too well with my tests in the newer video.
@ONI1013. Жыл бұрын
The new P1 versions can be adjusted, as well as adjust the motion sensitivity. It’s slightly larger but has double the battery and is Zigbee 3.0 protocol.
@ngreed 2 жыл бұрын
Nice video! if I can get power to the location, I still prefer to use your DIY Multi Sensor that you showed a while back. Any chance of doing some Door/Window sensors in the future. One last thing where did you get that "Got MQTT?" shirt
@digiblurDIY 2 жыл бұрын
Yes I love my ESP based motion sensors as well. Little different ball game there but no batteries and all MQTT. Zigbee is a great option for me where I can't get power to easily. Second.. I made it. Just one of my weird ideas to do. We were talking in my discord server(link in this video description for anyone reading going what discord?) I might do a small run for some people and make these shirts. Pricing some shirts later today to see what the cost would be.
@OldCurmudgeon3DP 2 жыл бұрын
It's not wireless (needs 5v source) but my go-to is an 8266 + AM312 PIR. They're a mixed bag though. I have one that only works out to about 3ft 🤬 and another from the same pack that see's out past 40ft. BME280 is a nice addition to the package.
@digiblurDIY 2 жыл бұрын
I thought about including it as I use those a LOT and battery life is great since there are no batteries. But it wouldn't have been fair as the class was different.
@demorez5 2 жыл бұрын
i have a few aquara sensors and the sonoff sensor. the sonoff eats battery like hell, the original was dead after like 4 months and the second is showing 66% after 2 months. The Aquara ones work fine, but the temperature reporting is seriously off. may get some Lidl or Ikea sensor in the near future for comparison
@tonymiles1888 2 жыл бұрын
Love the review, thanks. Could you test the Shelly Motion, it looks good on paper and appears to be really flexible. I have had different motion sensors over the years and I haven't been impressed with any. The best ones I have found are the Philips Hue. My problem is with the cool down period, I always find myself in the dark! I have just started using Home Asistant so is there a way you could get round this cooldown period?
@digiblurDIY 2 жыл бұрын
You could adjust the cooldown period, or just simply set a delay based on the first trigger and it keeps getting triggered anytime there is more movement.
@tonymiles1888 2 жыл бұрын
@@digiblurDIY I've got the cooldown as low as it will go. I've tryed the delay and that works great thank you're a star!!!
@marcusone1 2 жыл бұрын
I never trust motion sensors for "Clear", and in my automations set them to run if "Cear" for X minutes, usually 2-5 to be safe before turning lights off automatically.
@JordanReese 2 жыл бұрын
I got a bunch of the wyse sensors, and was really frustrated when they started dying... So the timing of this video is great for me!
@oldnewsglory Жыл бұрын
Nicely done - but your kiddo stole the show LOL I find that AGSHome one is hyper responsive when mounted on a ceiling (8'). I just use an Echo 4th Gen for a hub and it never has issues with connectivity.
@digiblurDIY Жыл бұрын
Thanks! He and sponge Bob made an appearance in the new one kzfaq.info/get/bejne/p72GldaLqNCac40.html
@krisztianszanto2312 2 жыл бұрын
I bought some Xiaomi sensors (not aqara) which are look almost the same as the aqara ones. I have the same issue with them as you had with the sonoff ones. I was working in the kitchen and suddenly it became dark even though i was moving in front of the sensor. Very annoying. Now i have to buy another sensors next to them because all of them glitches like this. Another issue with them is the effective range according to Xiaomi is about 7 meters but as far as i tested practically its about 3-4 meters at most only.
@mrk6090 2 жыл бұрын
Good overview. I was about to buy Sonoff as I have sonoff devices already. But the issue with continuous motion is a no go for me. Has this been resolved with updates maybe?
@digiblurDIY 2 жыл бұрын
They do have a new model coming out in a few months.
@nick024 2 жыл бұрын
@@digiblurDIY hello where is this information from? that would be awesome if true
@circuitdotlt 2 жыл бұрын
I tried using the Aqara sensor (non-LM one, without lux sensor). The cooldown is 70 seconds exactly, which is very long. The problem with it was that it was not checking for motion while triggered, and any motion within that window will not extend the cooldown. So if your motion took 69 seconds, then stopper for a couple of seconds and resumed, it will stop detecting motion immediately, and start again. Which is really bad if you are controlling your lights off of that. A hardware mod makes it check for motion even during the cooldown, extending it with every motion. So the cooldown will be 70 seconds after your motion stops. I have actually used a rule that checks if door was open 70 seconds ago and if it was possible to leave the room when motion actually stopped. One more problem that I discovered is that it still does not check the motion continuously. Looks like it checks it every 5 seconds or so, so if you entered the room, closed the door and, for example sit down to do your thing, it will like not detect those few seconds it took you to sit down. A real shame really, as the sensor is great otherwise.
@bigdeal87 2 жыл бұрын
So with the mod you also get rid of that 5 sec window to catch motion? What about battery life after mod?
@circuitdotlt 2 жыл бұрын
@@bigdeal87 I don't think it will have any meaningful effect on battery, as it is always active during sleep anyway. It does seem to still have 5 seconds of ignorance after initial trigger, so if my motion takes 4 seconds, the whole cooldown will be 70 seconds instead of 74, as expected. This is not good, as it makes presence detection bit tricky in some corner cases.
@JaviepalFordring1 Жыл бұрын
Weird the sonoff one I recently bought it and it's working very good, it didn't change its state to clear until I got out of the range of the sensor no problem.
@digiblurDIY Жыл бұрын
Is this a new model maybe? I heard they were coming out with the cc2652 based ones but didn't see them hit the store yet.
@benoitcloutier6228 2 жыл бұрын
I’ve been using the IKEA Zigbee motion sensor and found it to be ok… (Conbee2 hub) Cool down period is way too long for my taste. Will probably be trying the Phillips as the cool down seemed to be the shortest one of all the ones tested here.
@eugsmiley Жыл бұрын
I have the Ikea Tradfri motion sensor set up in the garage in a test setup with ZHA. I find that the first time I walk into the garage for the day that I have to manually hit the Kasa light switch, but after that it works fine throughout the day. I haven't viewed the traces on that yet, though.
@dougle03 2 жыл бұрын
Cool off period is essential, it's amazing that it's not a configurable setting. I started off with RF motion sensors and their cool off is sub 3 seconds; I don't like RF as my setup gets confused of more than one sensor is triggering at the same time (Hacked Sonoff hub) but none of the Zigbee sensors I've tried work for what I want. My shortest motion light I have is the overnight bathroom light that stays on only for 15 seconds unless retriggered (I use Node Red) - Does anyone know of a Zigbee motion sensor that has an adjustable one time and cool down? P.S Your son is a future superstar Travis.. 😃
@digiblurDIY 2 жыл бұрын
He's a damn genius. I was wondering what was taking him so long and he goes I needed my sponge bob mask since we didn't have the big dog around to test it. Then I saw it didn't trigger was well with it on.
@speedfreakpsycho Жыл бұрын
Hi, Can you recomend some sensoor that I can use to detect my cats? We have a huge pack of street dogs just on the other side of my fence, they already killed one of my cats. I am looking for the solution that can be placed in 2m outdoor hallway to detect them and warn me that they escaped from the house. I need an instant notification, wifi or sim..also it has to update all the time. For example some of them have the immunity if there is a movement detected, they wont detect anything for lets say 2 minutes...5 minutes...I don't want that.. I need constant update of movement cause we have tree that can false trigger it.
@digiblurDIY Жыл бұрын
I'd probably use Frigate for that with object detection.
@pito67rub 2 жыл бұрын
Do we need several zigbee hubs, or you can use one (NOT the echo DOT 4th) for all your zigbee devices?. Sorry for the ignorant question, but I'm new to the zigbee protocol.
@digiblurDIY 2 жыл бұрын
Only one Zigbee hub/coordinator, other powered Zigbee devices such as plugs, switches, etc will repeat the signal creating a mesh if needed.
@pito67rub 2 жыл бұрын
@@digiblurDIY Thanks
@dab42bridges80 2 жыл бұрын
I'd be interested in your thoughts about the Shelly wireless motion sensor (wi-fi not Zigbee.) I had initial issues with it that were fixed by a couple of firmware updates and a static IP, but now it works well as a sensor. The only problem I still have is the web interface becomes inaccessible after a short time and it needs a reset to "wake it up". Curious if anyone else is having this problem.
@digiblurDIY 2 жыл бұрын
I'll see if I can get one, a little pricey I see.
@yokich2 2 жыл бұрын
I use Third Reality sensors for lights and other automations and so far they work well. Great informative video.
@digiblurDIY 2 жыл бұрын
Thanks!!
@klausthehybrid3128 2 жыл бұрын
I want to buy the third reality, i just have an alexa echo 4th gen, will it work? Or i have to buy another thing?
@Codeaholic1 2 жыл бұрын
I just bought two more philips sensors, and yeah, ugh, the price is not great. But i've had some for a year and the batteries still work. They're rock solid, so I consider it worth the price ($40 each).
@digiblurDIY 2 жыл бұрын
Definitely get what you pay for with the Hue I found. I was very surprised.
@2gnospam Жыл бұрын
Can you do a zigbee vs z-wave protocol comparison? Why use one vs the other?
@digiblurDIY Жыл бұрын
Try this one kzfaq.info/get/bejne/fryhZ9eFm82YYYk.html
@ilducedimas 2 жыл бұрын
Such a great video, such a great idea, such a waste of time you just saved us from... To sum up : thanks buddy and keep up the GREAT work :)
@digiblurDIY 2 жыл бұрын
Thanks! Been on my mental list for a few months now and I wanted to expand some stuff on motion lighting. Of course I had to know which to use then it spiraled into comparing 7.
@digiblurDIY 2 жыл бұрын
Philips Hue has one but of course again that price. I might eventually pick one up but it would be easy to make some of these rain proof.
@cobalt01snet 11 ай бұрын
Try homeseer mini sensor, mag base, i have one in laundry room, one in the bedroom closet, on time set in homeseer, work good
@digiblurDIY 11 ай бұрын
Will check it out.
@the-matrix-has-you 2 жыл бұрын
That is the exact reason why I had to build my own Wemos D1 Mini External Interrupt Wake Shield. It Works great works on 2x 18650 batteries not the cheap way of doing it but I wasnt trying to build a cheap product. I Was after Quality now I have 8 of them guarding my House at nights with MQTT Mosquitto and Home Assistant. It feels good to be in control and not in the control of Company...
@digiblurDIY 2 жыл бұрын
These are zigbee, no company controlling them. But I do love my ESP based motion sensors...no batteries!
@the-matrix-has-you 2 жыл бұрын
@@digiblurDIY Yes I know Zigbee. It is a RF signal to communicate through a Zigbee Bridge. How can you not use batteries... I dont get it?
@marcvought 2 жыл бұрын
will the lindkind sensor work with the echo 4th gen zigbee hub?
@digiblurDIY 2 жыл бұрын
Yes, they state it is compatible with that hub.
@doble_G 2 жыл бұрын
Does the Linkind need another hub? Can i just pair it with my nortek zigbee hub on home assistant?
@digiblurDIY 2 жыл бұрын
All regular zigbee. Pair it up and roll.
@doble_G 2 жыл бұрын
@@digiblurDIY I bought some linkind motion sensors and they are on firware 0x51230002, there fore they have problems updating the state. Sometimes they get stuck on Detected for several hours. Do you happen to know how I could update the firmware?
@CamStansell 2 жыл бұрын
Aqara sucks for me. they just keep going to sleep and never wake up. i got some ikea tradfri ones and they are much better. but havent tried any of the ones in the video so cant compare. good vid !
@klausthehybrid3128 2 жыл бұрын
I want to buy the third reality, i just have an alexa echo 4th gen, will it work? Or i have to buy another thing?
@digiblurDIY 2 жыл бұрын
Nope, you are good to go. That Echo supports the Smart Home Zigbee functions right out of the box.
@klausthehybrid3128 2 жыл бұрын
@@digiblurDIY Thank you! I just need it to turn on and off lights, which one would you recommend me? Third reality or Aqara?
@digiblurDIY 2 жыл бұрын
Probably the Linkind or Third Reality given they both mention the compatibility with the Amazon Echo. More about size and looks
@RubenKelevra 2 жыл бұрын
I use currently only the TuYa TS0202 in my setup. They are reliable as far as I can tell, and are very small :) Sadly they are absent from your test :/
@digiblurDIY 2 жыл бұрын
Only tuya ones readily available to me seem to be the ones like Agshome rebrand.
@Perseids64 2 жыл бұрын
I'm afraid I'll be returning my Linkind sensor. I haven't had any luck with it reporting reliably. It stays on "detected" for hours at a time whereas my Aqara sensors update without fail. I also like the additional "Occupancy" and "Lux" outputs that the Aqara include. I have even removed and re-added it a couple times to no avail.
@digiblurDIY 2 жыл бұрын
I would definitely return them if you can't get them to work reliably. No loyalty in brands here myself. All about what works for the job and what hurts the wallet the least.
@digiblurDIY 2 жыл бұрын
Interesting. Mine show 5.13 in Zigbee2MQTT, most of the users I do talk to use Zigbee2MQTT with Home Assistant and/or NodeRed though. I'll have to see if I can pair one up with a hub I have of theirs to see if it will take an official upgrade. Linkind has been receptive on their support channels.
@digiblurDIY 2 жыл бұрын
Looking at your numbers that might be 5.12 where 5.13 appears to be the latest. I paired it with their little hub and there was no firmware upgrade available for the motion sensor. Not sure if support would give us the files to do the upgrade via other methods but worth a shot.
@jmr 2 жыл бұрын
I love Sonoff but the motion sensor is terrible. I have the same issue with them indicating occupied rooms are clear. I've also had more false positives then I would like. They always detect the initial motion but it's as if the threshold raises. Then whatever it detects must leave the room for a cooling down period to reset it.
@digiblurDIY 2 жыл бұрын
Love hate relationship with them as well here. Call it like I see it and hope they take it as constructive criticism if not...oh well.
@jmr 2 жыл бұрын
@@digiblurDIY Just came back to this video. I'm working on presence detection for lighting. Dang those Phillips sensors are expensive! I checked price history $26.99-$69.99 with a current price of $39.99. i think I may wait for a sale or find a cheaper sensor. Linkind doesn't look too bad. Thanks for the great video and if you don't mind.. What was that ZigBee dongle you recommended for plugging in the back of a HomeAssistant server? I wrote it down somewhere and forgot. EDIT: Amazon has the Linkind for $14.99 after the $3 off coupon.
@BrettWyrick 2 жыл бұрын
Hey, just wanted to say "thanks for making this". I think the Sonoff ones may have had a firmware update? I think I'm going to roll the dice on a few. They're cheap on aliexpress; about a 50% savings sometimes vs. Amazon in the US. If those don't work I like the ThirdReality ones simply because they take AAA. Question for you - are you a Home Assistant guy? I've also been considering YoLink; YoLink is supposed to have HomeAssistant integration by the end of March. The whole "LoRa" thing interests me; seems like it may be more efficient than Zigbee but so far it's basically YoLink and no one else in the space.
@digiblurDIY 2 жыл бұрын
I'd probably wait it out if you really want that brand until the next hardware revision comes out. Yes, I do some HA stuff indeed. I've looked at YoLink before and while the range is nice, I haven't had range issues in my home or even neighbor's yard to put sensors. I even did 1500ft link with Zigbee without issues on a video. I have a lot of interference on the 900mhz hand here but maybe LoRa could deal with it given the lower bandwidth and such the way it is designed to deal stuff like that. I'll be curious to see if their integration involves enabling MQTT locally or just going cloud junk. Speakong efficiency though I'll have to say Zigbee is going to be more efficient on my time and money at this time due to many manufacturers are competing for business on Zigbee and not just one hub ecosystem.
@TheDescender4 2 жыл бұрын
@@digiblurDIY Do you happen to have a link or article that talks about this new hard revision for the SONOFF SNZB-03? I couldn't find anything about it online and was wondering if you were aware of a release window.
@digiblurDIY 2 жыл бұрын
Right here www.digiblur.com/2021/12/new-sonoff-zigbee-bridge-and-sensors.html
@LAYG0 2 жыл бұрын
How about The Best* for use with Home Assistant that includes temp/humidity?
@digiblurDIY 2 жыл бұрын
I'd go with separate sensors to be honest. Let a motion sensor motion and temperature sensor do its own thing.
@LAYG0 2 жыл бұрын
@@digiblurDIY I'm just trying to kill 3 birds with 1 stone by having my bath lights come on auto & turn on the vent fan based on humidity relative to other devices tracking temp/humidity in the house. I bought several Homeseer HMS200, but they don't play nice with Home Assistant (zwave, I have 0 other zw devices) . . . which I should've researched BEFORE purchasing.
@Skhulile84 2 жыл бұрын
The Sonoff issue is an annoying one that I noticed after getting mine too to control lights, however I found that if you flash the Sonoff Zigbee Bridge with Tasmota and use the default Zigbee2Tasmota, the mqtt does send a Occupancy=1 tag when motion is detected, but also sends a ZoneStatusChange=1 tag. If there is still motion after around a minute another mqtt message would come with Occupancy=0 (As you've shown in the video) but the ZoneStatusChange would stay as =1, if there isn't motion anymore then it would also become =0, so I've now just created an Mqtt sensor in Home Assistant that uses the ZoneStatusChange tag instead of the Occupancy tag and now it is working very well as a motion sensor to automate my lights!
@mortenmoulder 2 жыл бұрын
Do you happen to know if the Sonoff by default also shares that ZoneStatusChange via ZigBee? My Aqara one has both occupancy AND an ias_zone entity, when paired into ZHA (not ZigBee2MQTT). Maybe the Sonoff does too
@Skhulile84 2 жыл бұрын
@@mortenmoulder I initially paired it with ZHA too, but I was only getting the Occupancy entity as well as the battery and not the zone entity
@mortenmoulder 2 жыл бұрын
@@Skhulile84 Ah I see. Interesting. Will probably flash Tasmota on mine then, when they arrive in a few weeks.
@Skhulile84 2 жыл бұрын
@@mortenmoulder Cool! But in my experience Zigbee2Tasmota works very well. What is interesting is that Zigbee2Mqtt also would not get the ZoneStatusChange property according to people who were using it instead of Zigbee2Tasmota
@ygreq 2 жыл бұрын
I just don't get why they don't let you set the cool down period.
@nomnommonsterr 9 ай бұрын
Uses more battery. Usually wired ones come with less cooldown period
@edfx 2 жыл бұрын
3:48 Good thing you switched to phillips screwdriver to open that phillips motion sensor.
@digiblurDIY 2 жыл бұрын
I was trolling the Philips PR team.
@EmilePolka Жыл бұрын
I dont have issue with snzb03 from sonoff, only that 1minute delay is just bad. Though it only works propwrly with official sonoff zigbee gateway and zha integration on home assistant via sonoff usb, it starts havibg issue once you use it to zigbee2mqtt which all the issue seen on this video are present. Tldr, dont use zigbee2mqtt with sonoff stuff.
@digiblurDIY Жыл бұрын
Or quite the opposite don't use Sonoff Zigbee stuff. That sensor is a mess. So many others out there that work fine.
@graphguy 2 жыл бұрын
Looks like they ALL require a HUB? Did I miss something. I currently have a bunch of wyze cameras, sensors and 9 ECHO devices and I really don't want to have to rely on another hub.
@paulgreatwich5228 2 жыл бұрын
No hub just home assistant and usb coordinator to control all your different manufacturer's zigbee devices.
@digiblurDIY 2 жыл бұрын
The echos that support Zigbee will work with these.
@paulgreatwich5228 2 жыл бұрын
@@digiblurDIY any reviews of zigbee vibration sensors? I believe the sensitivity can be controlled but don't know if possible using zigbee2mqtt?
@filipsvoboda7712 Жыл бұрын
Aqara and Xiaomi look almost the same, but they are not the same sensors. Aqara has an extra light sensor and adjustable sensitivity.
@digiblurDIY Жыл бұрын
That's the new sensor that was recently released. I covered it in the updated video. kzfaq.info/get/bejne/p72GldaLqNCac40.html
@ragdepc 2 жыл бұрын
Does anyone using 433Mhz?? I am using the sonoff rf bridge with esphome and is almost instantly responds from my doors sensors! I just order smog detectors 433Mhz also
@digiblurDIY 2 жыл бұрын
Yes, I have a couple door sensors on the 433mhz side.
@kriss1313 2 жыл бұрын
I can confirm Sonoff sensor does not retrigger at continuous motion. Drove me over the cliff mentally :). Too bad the size is perfect.
@digiblurDIY 2 жыл бұрын
Great price too but the issues of it had to keep me away from getting more.
@AQHackAQ Жыл бұрын
Have you tested Tuya PIR? It's around the same price as the Sonoff, maybe a bit higher. But I'm afraid with these Chinese brands, that they could be just be using the same sensor or even rebadge.
@digiblurDIY Жыл бұрын
I believe I did in the second round up video.
@AQHackAQ Жыл бұрын
@@digiblurDIY I did look through it, but I don't see a Tuya in the video or in the list. Unless there's a different name?
@digiblurDIY Жыл бұрын
Yes. Three Tuya based ones in this one. Always a different name. kzfaq.info/get/bejne/p72GldaLqNCac40.html
@raymondbailey2142 2 жыл бұрын
Is there a way to set a motion sensor up so my cats won't trigger them?
@digiblurDIY 2 жыл бұрын
That third reality one up higher might do it.
@raymondbailey2142 2 жыл бұрын
Yeah unfortunately I don't use echo devices only google.
@digiblurDIY 2 жыл бұрын
Any home automation software or hubs?
@raymondbailey2142 2 жыл бұрын
Google AI and Phillip Hues. I currently use Google routines and voice commands (we all know how well Google likes to listen to a command and do the exact opposite)
@szrvl 2 жыл бұрын
Tried the Linkind ZS110040078 and it goes to detected and never clears. Tried two of them and they both do the same thing.
@digiblurDIY 2 жыл бұрын
Definitely return them as that is not normal. I have a few of them around the house and know several others that use them. Could be too sensitive maybe due to heat movements or something else weird in the area. Put one under a thick cloth to blind it and see if it goes to clear.
@szrvl 2 жыл бұрын
@@digiblurDIY Thanks for the fast reply. I put it back in the box and it still won't clear! The first one I returned, the second one does exactly the same thing.
@digiblurDIY 2 жыл бұрын
That is odd both are doing it. I'd start to investigate signal or system issues? What are you using?
@szrvl 2 жыл бұрын
@@digiblurDIY Home assistant with HUSBZB-1 USB hub. I also have a couple of the Philips motion detectors and they work perfectly. Those are the only zigbee devices I have.
@digiblurDIY 2 жыл бұрын
That one is very old for sure. I'd highly recommend a CC2652 stick like the iTead Sonoff one I showed recently in the upgrade firmware video. Lots of flavors and MASSIVE difference in reliability and speed.
@patrickvanbavel1413 2 жыл бұрын
The Aqara has a more recent T1 version. I believe this allows you to set the cooldown period to 1-199s. I'm curious how that would compare in this lineup :)
@digiblurDIY 2 жыл бұрын
I asked Aqara about this model this model a few months ago but said it wasn't being released in the US at this time. Maybe I can find them on Ali or something.
@rlatarche 2 жыл бұрын
FYI on the Sonoff Sensor - if its setup with ewelink as an automation/scene it presents the issue you show - HOWEVER if you set it up with Alexa the routine works PERFECTLY - Go figure!
@QuietTravelVideos 8 ай бұрын
Is it just me or is does every motion sensor look like they're from the 90's😂😂😂
@JasonPhipps 2 жыл бұрын
WyzeSense does not require the cloud... I run mine locally, with the dongle directly into a USB port, not their camera like they say I must... They're just selling cameras... LOL That said, they are past end of life, and I'm looking for replacements for when they die entirely, but they haven't yet. Pesky things just keep working. (The one in my mailbox doesn't like cold temperatures though.) :-)
@digiblurDIY 2 жыл бұрын
Correct. The old was pretty damn cool except for the bricking part.
@theaustindude 2 жыл бұрын
@@digiblurDIY Those were the best. Super small and had great range and reliability. All of mine ended up bricked and I've had a hard time finding a suitable replacement. I prefer to have my motion detectors more "stealthy", so the black lens on the wyze was an added bonus. I'm actually surprised nobody else makes a black pir.
@auxz2jz158 2 жыл бұрын
Any wifi motion sensor
@digiblurDIY 2 жыл бұрын
No. I have done those in the past with AM312 and ESP chips.
@Totalballa41 Жыл бұрын
I wish my son did his thing....
@digiblurDIY Жыл бұрын
He loves being in the videos for sure!
@yousuck2000 2 жыл бұрын
Not so useful for me since most important feature for me would be battery life.
@digiblurDIY 2 жыл бұрын
Those larger batteries are key then.
@mohammedkazem1826 2 жыл бұрын
Shelly Motion Sensor
@digiblurDIY 2 жыл бұрын
Have one ready to go... Boy...
@gmichia 8 ай бұрын
Looks like double A to me.
@weronikaborsukowska2736 Жыл бұрын
I confirm that sonoff sucks
@barry1902 Жыл бұрын
The sonoff is indeed a pile of shit. It's amazing how useless the product is. It's meant to be a smart device! It constantly disconnects, and needs to be factory reset often. Shocking that it can be sold in European markets for 10 to 15 Euros.
@digiblurDIY Жыл бұрын
Yup. I totally skipped it in the second round-up video of motion sensors. I haven't seen their new versions drop yet.
@RobertusWE 2 жыл бұрын
2021 and you use battery device.... isn't a domotics, means be a slave of house, not house that serve you!!!!!!! WAKE UP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@digiblurDIY 2 жыл бұрын
Wireless power isn't ready just yet.
@RobertusWE 2 жыл бұрын
@@digiblurDIY usb Power yes, like aeotec multisensor.
@digiblurDIY 2 жыл бұрын
Mod for the Aqara Sensor community.smartthings.com/t/making-xiaomi-motion-sensor-a-super-motion-sensor/139806
@finipini 2 жыл бұрын
Loved that the first two tests with your son and then your dog the aqara was always the first to trigger.
@finipini 2 жыл бұрын
Btw Travis, i have modded 4 of this aqara motion sensor ( 5 sec. cool down) and one of them i killed, it is always detecting motion (about 4,5 times a minute).... and i done the mod 16 months ago anda never changed the battery, not even that faulty one, i have it now in the xiaomi gateway and it stills sending triggers, and i didnt even know where it is right now 😂
@finipini 2 жыл бұрын
So i can say that this would not change so much ( if at all) the battery life. What some folks complains about ( not hapenning to me) is that sometimes the sensors after trigger motion it retriggers a few seconds later with no motion at all.
@nathanvancleave8434 2 жыл бұрын
I’m not sure what the point of doing the mod is if you’re using home assistant. You can just reset the state of the Aqara sensor to “off” with a script and it will trigger again in about 5 seconds.
@finipini 2 жыл бұрын
@@nathanvancleave8434 very simple. You do that ( in z2m there is no need, its enought editing the occupancy time out) and then see how much time is needed to the sensor goes on again. Only that ( script or wathever) is useless, the cool down is always 1 minute for aqara. Unless you do the mod!
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 185 М.
Trendy Tech Review Show
Рет қаралды 6 МЛН
Immersed
Рет қаралды 58 МЛН