MOTORCYCLE GAS TANK CLEANING
Рет қаралды 23,115
9 жыл бұрынCLEANING MY 1989 MOTORCYCLE GAS TANK
@jerrypeal653 Жыл бұрын
Seems if you have rust any coating is gone . I know this is 7 years ago but evapo rust is your friend and fuel filters for what’s left
@anthonyflorez3645 4 жыл бұрын
So how did you get the rust crust out? There's that cylinder lip in the fill of the tank that I can't figure how it would come out.
@JunkworksGarage 4 жыл бұрын
i flushed it lots. ime going to run a fuel filter for any residual thow. im sure its not perfect .
@MegaGuitarzilla 6 жыл бұрын
Give us an update....did it get to going good......make another video if you still have it!
@DavidSalazar-ct7ho 4 жыл бұрын
Hey man I appreciate your videos I have a 87 700 Virgo and the gas cap is stuck on I've tapped it and tried wd-40 on the key hole hoping you have a tip thanks for making the videos man
@JunkworksGarage 4 жыл бұрын
drilling it might be your only option unfortunately. i would try to find another cap first i dont know how hard it would be to find
@Hogbellylife 2 күн бұрын
I just had the same problem. I got it open by putting the key in & using a small screwdriver to get some leverage and it popped.
@ricardoarellano8166 4 жыл бұрын
Hey do you know if the 920 gas tank fits the 750 frame?
@JunkworksGarage 4 жыл бұрын
i don't sorry
@Hogbellylife 2 күн бұрын
What type of oil did you put in the tank to keep it from rusting?
@JunkworksGarage Күн бұрын
marvel mystery oil
@Hogbellylife Күн бұрын
@@JunkworksGarage ok thanks. I inherited a 85 virago 1000 after my brother died. I got it running but it won't charge the battery & the tank is full of rust. These videos are helping me a lot.
@yngvardharjo3704 3 жыл бұрын
FROM DAY ONE U GET THE PAINT SCREEM
@lordracula2461 4 жыл бұрын
How to remove JIS screws: use a JIS screwdriver not a phillips screwdriver
@JunkworksGarage 4 жыл бұрын
mine were phillips
Rose Anvil
Рет қаралды 905 М.
Midland Cruiser
Рет қаралды 10 М.
Channel2Tech
Рет қаралды 3,5 МЛН
Макс Ващенко
Рет қаралды 1,3 МЛН