Wow, I have to say that this was the most professional review/explanation video I've ever seen! You had everything ready, no having to look for things in the middle of your talk, etc. I learned so much and you answered every question I could have had. Thank you so much for taking the time to create this video!!!!!

I just got my stand out again. I’ve had it since at least 2016. We moved out of state in 2018 and I just quit using it. I forgot how to set it up. I use the Qsnap setup and totally loved your video. Thx so much for doing that video!

Loved the wave at the end.

Thank you. The Wooden Stand that I was given as a Christmas Gift like 30 years ago died a death where I kept trying to make it work...reversing everything...I'm not left handed...and the point of balance didn't work, so it just kept making a head dive...and the original nuts were within wooden nuts, so trying to transfer things to wing nuts, while possible, meant shifting hands for the part of turning the frame over to work on the back briefly...not only now trying to retrain my non dominant hand to be useful in different ways, but the place to tighten and loosen was now next to my non dominant side, and my hand wasn't reversible. Several tries at different floor stands with non in the Goldilocks Zone for me, and I was beginning to think the hobby that was also my meditation Zen was gone and then after 2 and a half years of stress with my Zen unattainable...two houses, a few illnesses that damaged either quadruped family members or bipeds... Finding this system was - I'm not religious, so at this moment blessing or godsend seem like the wrong words, but also right. Finally a stand that could work and not break like the last one... But then NO instructions or pictures on how to put it together!! Arghhh!!! Finding your video was also a "blessing" / "godsend." Thank you. I'm going to check your other videos and hope you have something for the magnification and light holder, and god the scissor tray. The main part I've got, lol. But now like the mechanics in comedic tv shows, I have three extra parts At least they're not extra parts for putting together a plane or a vehicle. You'd know you missed something vitas with the sized pieces being extra. I hope you have these covered on other videos. Thank you soo much for your video on how to set this stand up.

Thank you. I could not believe there was not a diagram. Your step by step was very Helpful. I attached a scrolling frame and adjusted to fit over my lap.

This is a really great video. You explained the difference between the frame clamp and the scroll clamp very well. Thank you so much. I was wondering which floor stand to get; now I know.

I really like the versatility of this system. And I really like the fact that it's metal. Thank you for sharing and showing!

Thank you for doing this review. You were very clear and thorough. It helps so much to see these frames in 'action', not just in pictures.

Looks like an awesome system!! Thanks for showing it to us!!

I like the different heads for scroll frames or the Q-snaps. Looks sturdy too. Thanks for sharing!

I’ve had mine for at least 10 years and like it very much. It’s very sturdy. I do wish it was in the lighter material like the newer models. It’s quite heavy. Mine also came with a pattern holder. Thank you for sharing!

I have the system 4 and I love it. I have the clamp and the medium scroll rods. I should have bought the q snap holders but I just use the clamp. I also have the extra extension bar that helps the reach. I like that it stays where you put it and the "teeth" gear system.

MOST HELPFUL review! Thank you!

you've convinced me to get one. thank you. I have no local source so the video was so helpful. can't wait to use it

oh my gosh! I have had this sitting in my closet with both heads for 4 years now, not knowing how to use it!!!! What a great video... I just gave up on it after I got it because I couldn't figure it out.... I've had the StitchMate Floorstand from Cozy Cottage for years and love it, but wanted to try something different that I could move around, so purchased the system 4.... I guess I just had "floorstand block" as how to use something new, so I tried and just gave up, packed my system 4 away and never looked at it again. I am going to get it out and give it another try, too expensive not too. Thank you for such a great tutorial. I really enjoy your videos. Amy from Oklahoma

Looks like such a cool system!

If I ever get a craft room I am definitely investing in that system. Very neat.

Thank you! Really helpful and informative video.

Great video! I do not have a floor stand and haven't even thought about buying one because I have no local needlework shops to see which one I would like best but you were wonderful showing how this one works and what it can and can't do, it really gave me something to think about :)

Great video! I too leave my project on my q snap....not for 2 years but all week long, I just kind of loosen the tension when I am not stitching!! The qsnap holder is not wide enough to hold a millennium I know we had talked about trying it out. .

Thanks so much for your video, very helpful.

Thanks so much for this video. You were very informative!!

Another great video Lori!

Thanks for showing this! I really really contemplated buying this system a few years ago when I first became aware of it, but there just wasn't enough information on the internet about, and it was pricey. Ultimately, I didn't, not because I decided against it, but because I just didn't make a decision at all. Now I have the Necessaire for my Millenium frames. If the System 4 had about 1/4" clearance or less, I would buy it now, as that is all the clearance my couch has. I can't use my current stand at the sofa for that reason. I sit next to the dining room table. I am looking into swapping the legs out with a thinner rigid material. I tried to order the special legs from Needle Needs, but that turned out nearly impossible.

Thanks Gran, I have to assemble one of these for a client

Thank you for this video. I just ordered my stand today. I was wondering is there anyway to lock the qsnap in place when you arent needing to flip to the back of the work?

I’m considering purchasing the System 4 lap stand. I like to use the scroll frames for cross stitch. Would the frame attachment work or would it be better to buy the scroll frame holder?

where can I buy those white clamps on the qsnap head? not the parts to the qsnap but the part that opens up for the qsnap. Somehow in storage one of mine is lost. I'm having alot of trouble finding those.

Hello, could you pls tell me who sells this item? I tried to check on the internet, but there were only embroidery patterns shown. I am very interested in purchasing this frame. You did a good jobs demonstrating it. Thank you.

Where can I purchase it? from a store or directly from them?

I need a scroll frame for my husband who stopped stitching his large beloved piece because the q snap tore his fabric. Can you recommend a scroll frame that is top quality. He has leukemia and this was his way to relax... Thank you.

thankyouthankyouthankyou, my new heroine!! I've just received my qsnap frame (with minimal written directions) and, although i'm not particularly mechanical, I thought it would be easy enough to put together! arrrrghhhhhh, after about a sweaty hour, I decided to hit the internet and found YOU!!! your video is so well done and so thorough and so clear! I'm saved! I tried one at a needlework shop and decided that after 45 years of stitching, I deserved this. I love it and am just deciding what to mount on it. I have two questions,please. is there anyway to use a grime guard garter with the frame? I don't guess so. and the only thing I'm not getting is that the "swivel factor" on mine is not as fluid as I've seen. it's quite firm. is there a way to adjust this or does that come with use?Again, I am so grateful to for your help! off to watch the rest of your videos! cheers, Lucia

Will the Oxford Gripper Frames work with the Frame Clamp??