New KEL TEC PMR 30 Upgrades Just Released! First Look at KEL-TEC PMR-30 Operator Mount! M*CARBO!

Рет қаралды 37,596

3 жыл бұрын

www.mcarbo.com/kel-tec-pmr-30...
New KEL TEC PMR 30 Upgrades Just Released and First Look at KEL TEC PMR 30 Modifications on the way to correct KEL-TEC PMR-30 Problems. Precision CNC Machined Peek High-Performance Thermoplastic Replacement Buffer that won't Melt or Deform under intense Heat & Pressure! Will outlast the factory buffer that melts. PEEK High-Performance Buffer can Take the Heat and Handle the Beating! Will maintain proper buffer thickness to ensure reliable cycling operations of the PMR-30. PMR-30 Peek Performance Buffer is resistant to chemicals and continuous operating temperatures up to 480° F. Precision CNC Machined 6061 Aluminum Replacements for Factory Plastic Safety Selector Switches
Left & Right Aluminum Replacement Selector Switches Included in this Kit. KEL-TEC PMR-30 Operator Mount Coming Soon! Frame Mounted to ensure reliable operation of PMR-30 and Accurate Zero of Red Dot Optic.
Mounted just high enough to use Fiber Optic Iron Sights and low enough to easily transition to your Red Dot Optics.
Mount Position allows for a more balanced PMR-30 with a full magazine
Avoids adding additional weight to the PMR-30 slide that will slow down the cycling operation just enough to induce Failure to Feed Malfunctions. No more PMR 30 FTF Malfunctions. Fixed the problems... now let's get a PMR-30 M-SERIES that will run right out of the box like a well-oiled machine! PMR 30 Mag Dump Action!
#PMR30 #MCARBO #KELTECPMR30

Пікірлер: 144

@MCARBO 2 жыл бұрын

GET THE NEW 2021 PMR-30 BUNDLE HERE! www.mcarbo.com/kel-tec-pmr-30-all-in-one-bundle.aspx

@CoolVee10 2 жыл бұрын

Also, do we have to run a certain ammo with the upgrades or no?

@Danger-Moen Жыл бұрын

I just installed all the upgrades, and I couldn’t be happier. You guys did a great job making this gun reliable now.

@kidgokuxl 3 жыл бұрын

Nice stuff you've come up with. I've been waiting for more on the PMR30 from your company and now it's here! Thanks for the video!

@DuneWest Жыл бұрын

I purchased the Kel Tec PMR 30 upgrade kit by MCARBO and had the Kel Tec factory guys install the upgrades including having them polish the stainless steel feed ramp----I only have tested it with the CCI 40-grain Gold Dot ammo and after about 3 full magazines it ran absolutely flawless...NO FAILURES!!! I had the upgrade mods done because I want to be able to carry my PMR 30 for more reliability and confidence and I believe I now have what I was looking for. Thanks guys!

@chadb1878 3 жыл бұрын

Can't wait to get the new mods! I had already purchased 2 additional buffers from the factory, but no sense replacing weak with weak, I'm doing this upgrade too! Only had 2 issues with FTF with the stock gun, both with 30 grain ammo. After installing the MCARBO feed ramp, mag release and spring, this thing chews through everything! It is one of my favorite 'pews to shewt'. You guys are going to turn this into a serious EDC or truck gun (actually, you already have!). Keep up the great work!!

@marcusturner4924 2 жыл бұрын

Love the way yall hook this gun up. Amazing 👏

@azazelakira12 3 жыл бұрын

I have put the all incluided bundle on mine, now I have to get more parts 🤤

@BuzzsawBrent 3 жыл бұрын

Impressive. Very Impressive.

@northeastslingshot1664 3 жыл бұрын

90% of folks crying about the PMR30 probably dont follow directions. Get an autoloader and tap the mag every five rounds to settle the rounds 40 grain recommended. (I have recently tested the 35 grain A22 Savage and they work as good or better than the CCI.) Ive had mine for 2 years. Had a ftf once and that was first mag and me handloading. Since autoloader runs sweet everytime. My neighbor is gunsmith and said he loves shooting the PMR and all his friends want to run it when they shoot in the sandpits.

@northeastslingshot1664 3 жыл бұрын

@@timusa3937 Do you have one?

@roygorman6624 2 ай бұрын

Bullshit!

@northeastslingshot1664 2 ай бұрын

@@roygorman6624 cry harder

@robertgore8911 3 жыл бұрын

Way to go brother! More upgrades for the pmr+cmr.Hooooaahhhh.😎

@Me2Lancer Жыл бұрын

Thanks for sharing. I have just purchased a Kel Tec PMR 30 and see the possible need for one of your kits. In the past, I've picked up several MCarbo kits for my Savage Axis rifles.

@darylerowan6061 2 жыл бұрын

I just ordered the all in one problem bundle!! I can't wait for no more jams!!

@haroldcherry1695 Жыл бұрын

Thanks 👍

@davidsomerset8411 2 жыл бұрын

Got an "All in One" a while back... Didn't put it in...until lately. I ordered the upgraded buffer and pin and the aluminum frame brace. ... so three days ago I installed the ALL in One ..... the over travel for the trigger was so tight I couldn't use it......it bent the Alan key trying to screw it in. But still I really like the SS feed ramp and the trigger pull is outstanding.

@cannonballsam5488 3 жыл бұрын

Chris, you are awesome. I appreciate the hard work you guy do. I am very hapoy about my mcarbo sub2000 gen2.

@luciankristov6436 3 жыл бұрын

I love it man ! Make a brace adapter from the front pic rail to run to the rear !!!!

@luciankristov6436 2 жыл бұрын

Just an update on the feed ramp and mag lock mcarbo parts. They've been on for about a year. I have had 2 malfunctions out of nearly 1500rds so far. Thats a win ! Well worth the money. Makes the pmr30 run perfect 💪🏻

@MasQueVencedorEnCristo 3 жыл бұрын

Keep up the good work! And do build one for the CMR30 as well they’re both great 22wmrs!

@kruzanJFD 3 жыл бұрын

Thank you for the buffer! We want the SS threaded barrel! :)

@timmcdaniel6279 3 жыл бұрын

Yep!!!

@marksturgeon7717 3 жыл бұрын

Recently installed the magazine release buttons on both my PMR's along with the feeding ramps and stronger springs and it actually seemed to make the issue worse, as far as unwanted mag releases goes, I think the edges of the button stuck out even further than the original one, which also gave me occasional problems, I remedied the problem completely with my Dremel tool. The new button does a great job however, of getting the mag to seat tight in the well and up where it is supposed to be and the feed ramp is perfect.

@modakkagitplugga 2 жыл бұрын

Actually interested in this now

@Hawkeyefoxspirit 3 жыл бұрын

Not sure about the bulky red dot mount , but the rest is just what I’ve been waiting on. My full M-Carbo bundle kit made my PMR trick as hell. Installed it last month and it was fairly easy with enough time and patience. The KZfaq video for installation was a big help. Absolutely love it so far. Highly recommend to anyone with a stock version. M-Carbo..You guys ROCK!!! 🤘🏼

@tomnaustin1 3 жыл бұрын

Good stuff

@cliffweatherbee6914 3 жыл бұрын

I've been waiting to see what else you guys were going to do with this fun little gun! I LOVE the safety and the upgraded buffer! Quit judging the malfunctions on a gun that isn't broke in yet! Lol How hard is the upgraded take down pin to get in and out?

@amorepreparedlife4557 2 жыл бұрын

Good stuff!

@Joeak74 2 жыл бұрын

Keltec should never have released the PMR 30 until it actually ran out of the box. MCARBO should just manufacture the pistol himself.

@SuperCinemaCraft 2 жыл бұрын

Subscribed, very cool

@strokerta1986 2 жыл бұрын

I picked up a PMR 30 a few years ago that was garbage. I through all the common replacement and upgrade parts that were available at the time at it with no luck. Full polish and lube, including the magazine would result in 2 magazines worth of ammo running well... Then back to failure to feeds and failure to ejects. I loved the gun other than that. I actually found this video as I'm trying to see if keltec ever fixed the PMR30's issues lol

@ArmincFPV 3 жыл бұрын

Love my pmr 30. I have not upgraded anything to it yet but so far it ran flawlessly. Can you please do a water test on these upgrades incase of rain or maybe mud and sand. I really want this as my carry gun. Thank you

@chesterleeds8295 3 жыл бұрын

You mention you took a stock PMR 30 out of the box and wanted to throw it away due to all the FTF's and FTE's. I have that problem as well, the only difference is I've done all the MCarbo updates to mine. I'm lucky to get half a dozen rounds out before a failure.

@MCARBO 3 жыл бұрын

Send us an email explaining this to help@mcarbo.com We can get it running, if your willing to send it into us.

@chesterleeds8295 3 жыл бұрын

@@MCARBO I did contact MCarbo and even included photos of the FTF's. All I was told was send it to you and you'd install the upgrades and replace any bad factory parts. I've already installed the upgrades. You guys are selling the upgrades as a fix to the PMR30 issues and in my case they did nothing. I'm too deep into this pistol to throw any more money at it. Just going to take my licks and move on.

@samdunlap5365 Жыл бұрын

@@chesterleeds8295 you just said out loud what the majority are thinking but are to afraid to say out loud because they just put a bunch of money into,, well I'd say a boat anchor but it's not heavy enough for that even with a full clip 😉 😀 😜

@TEKAMAN408676ab 3 жыл бұрын

Cool~♥

@charliemike3173 3 жыл бұрын

My man... as if my PMR-30 with MCarbo upgrades wasn't perfect already. Take my money.

@billyquin3216 Жыл бұрын

Make a dependable firing pin for the PMR, and the CMR

@billsmith8739 3 жыл бұрын

How about making Halo for the PMR30 also?

@chriscarnes87 3 жыл бұрын

The only thing about that type of mount is you can’t holster the gun. But that’s a personal preference , still nice though 🤙. I do like the others mentioned! I wonder if it would be possible to have a milled aluminum top cover that can accept different red dots (adapter plates) and have a dove tail for a rear sight. I think 22 mag should have enough energy to reciprocate the slide, but idk? The more the Merrier when it comes to aftermarket parts! But keep up the good work👍.

@SurrealViews 3 жыл бұрын

+1 on the inability to properly holster the firearm with that mount.

@breckfreeride 6 ай бұрын

Nice

@fancyultrafresh3264 3 жыл бұрын

At this point I may as well just give you my routing number. Just ordered! (Glad I'm on your mailing list...)

@2CabrasLocas 3 жыл бұрын

Got all your upgrades so far and LOVE the stuff! If ya'll are looking for ideas tho... A reliable magazine would be AWESOME (Even with the modified feed ramps & replacement retainer, only 2 of the 5 factory mags I have are REALLY reliable).

@MCARBO 3 жыл бұрын

This is definitely on the list and in the making...

@tomubl2655 2 жыл бұрын

basic concept of this design was good, production execution, to include magazine quality and failure rates and heat treated retention pins should be mfg 101. i hope i dont have to get rid of it. i had 1 of 3 mags fail. yes the high capacity was another nice attempt, but it seems overall that kel tec got out in front of itself.

@squidysnaxx4633 2 жыл бұрын

@@tomubl2655 Just hold on to it if it’s an option for you. The comment above says MCARBO is designing a new magazine for it, and I have no doubt it will be reliable.

@AeraiRC Жыл бұрын

I bought a PMR30 and the serial number looks more like a screwed up alphabet. So it's a GEN 2. And it fired 240 rds out of the box. So since I have the KSG and cmr30 I ordered the the Gen2 threaded barrel. So my suppressor can be mounted on either of them. PMR/CMR. I STILL need several more mags. And the frame mounted R.D.O is something I'll look into.

@CPMJunkRemoval 3 жыл бұрын

Come on! I need the rest of the updates!! Where do you grease it?

@MrKalashnikov47 2 жыл бұрын

Love it, is any of this available for purchase yet?

@davidc.9933 Жыл бұрын

Cool mount but anyway to holster?

@dfrazier2396 2 жыл бұрын

Yes. Will buy. Multiple M Series. Yes. Please manufacture. Waiting.

@marcpeters2230 2 жыл бұрын

M Series PMR I would buy another.

@blakesharp586 2 жыл бұрын

Id love to see a mcarbo version be released i don't have to buy all the parts separately

@late6812 2 жыл бұрын

I did the feedramp up grade, though it didn't need it, mine was always reliable, now why not provide a threaded barrel? That's what's really needed instead of these fancy dressings, I mean some of us want to add a silencer for a much needed ear protection!!!!!!!!!!!!....

@jacobbradford7229 3 жыл бұрын

Still hoping for some more KSG parts...

@ThatAintGud 2 жыл бұрын

Any chance for a brace?

@dannyrobinson813 3 жыл бұрын

how can i get the buffer and pin for my pmr -30?

@deplorabledave1048 3 жыл бұрын

Ohh, I just checked. you are in Clearwater. I am across "The Alley" in Fort Lauderdale" I' will make arrangements to drive over one day and meet. I'll just have to budget in fuel costs and the inevitable ticket I will get on Alligator Alley. Someone needs to tell me when the best time to come across. I have an M3 that is sooo hard to drive "slow". Do they use lasers as well as Ka band radar? It's been a while. I got the M3 in 2008 in Sarasota. No ticket that time, amazingly. Alligator Alley and Florida Keys are ticket magnets for me.

@charlielima9855 2 жыл бұрын

hello and congrats! Are you going to do the same with the CMR30? that would be great!

@lokichoki_ 2 жыл бұрын

Keltec offers only 2 RD mounts on the slide the Burris FF2&3 and that discontinued Docter sight I'd wonder if these newer RD's are lighter and won't mess up the reliability

@juiceious Жыл бұрын

Finally decided to go through with this for my pmr30, but it’s halfway through 2022 is a new upgrade kit coming out soon ?

@raiderswish Жыл бұрын

Can you guys make a .17 hmr conversion barrel? Iv seen a video where it will cycle and fire. 17 hmr. Once the gun is broken in, it's capable of shooting a variety

@late6812 2 жыл бұрын

How about getting g them to bring back The threaded barrel

@Frank-bc8gg 2 жыл бұрын

Are there plans for a slide release? Currently keltec says you're not supposed to use the lock and slingshot the slide on empty (should you ever reach it)

@lerrinderooy Жыл бұрын

Now for the cmr or did miss that video.

@FLsheepdog1 Жыл бұрын

What about holstering it now?

@jeffthurmond7537 Жыл бұрын

Will these parts fit the cmr?

@davidtate166 Жыл бұрын

I read the barrels were bad bullet was keyholeing.very poor accuracy.got it fix.?

@Debald Жыл бұрын

Any ETA on the release?

@HillbillyUp Жыл бұрын

I have been waiting on this optic mount to be available, I have all of your upgrades but waiting for the optic mount so I can show case it on my channel. Plz, plz, plz let me know when it is available.

@jamald62jd 2 жыл бұрын

Could my Keltec Sub 2000 gen 1 .40 Glock version get a quad rail?!

@MasQueVencedorEnCristo 2 жыл бұрын

Sir. I am demanding a new stronger improved firing pin for both the cmr30 and the pmr30! I will order buffer safety operator mag which I’m missing. I found out today the firing pin for cmr30 breaks at 800 rds and for the pmr30 at about 1000 rds. With such a weak firing pin it really has turned me off from getting any more mods. Thanks again hope to see a video soon with a 10k rds firing pin if not 20k rds firing pin would be even better thanks again for reading this venting msg.

@jmichna1 2 жыл бұрын

Any MCarbo update/news/progress on an improved MCarbo magazine for the PMR30 (& CMR30)?

@tampabayspearfishing5297 2 жыл бұрын

They are working on it, a quad stack metal magazine has never been done before. It is a tough project but is being worked on by MCarbo, (I work at MCarbo).

@DJD925 3 жыл бұрын

Please tell me you guys r already working on some replacement parts for the new ruger lcp max! Love all the after market parts you guys did with the ruger lcp 2

@MCARBO 3 жыл бұрын

We were just talking about this today! Let us know where to find one...

@DJD925 3 жыл бұрын

@@MCARBO 😂

@terrythomas3880 Жыл бұрын

I've added all the upgrades MCarbo makes and the most rounds I've gotten without a stoppage was 18. Usually it's less than 10 rounds before a FTF, FTE. I've used every brand and bullet weight of every .22 magnum made for this pistol and it's worthless. Can you please help me to get this thing to run like it's supposed to?

@nealhadley1482 Жыл бұрын

I LIKE this. So is this going to be a completely different gun, or the same as a PMR 30? I have a PMR 30 and at the moment not very happy with it. One problem after another. My latest is what I believe is a broken firing pin, which I am expecting in the mail this week from you guys. So my question I guess is can I convert my existing PMR 30 into the PMR 30 M? I have already bought the red dot mount to go over the rear sights, but like this new one mounting to the frame. I really don't want to take the chance of just buying a PMR 30M when Walther has come out with a semiautomatic 22mag pistol now. So what should I do??????????

@marktrujillo2150 Жыл бұрын

Buy the walther i got one for Christmas not very many problems with it and its red dot ready also i put a crimson trace red dot on it also has load assist on the magazines and paddle mag drops

@zadocmorales583 Жыл бұрын

I would like to buy one but already with all the 30 in one installed I could buy it with you and how much

@3wheelmannc860 3 жыл бұрын

I would be very interested in a MCarbo PMR30. My regular one was sold about 2 years ago…terrible functionality.

@northeastslingshot1664 3 жыл бұрын

Ive had one for 2 years and never skips a beat

@InvidiousIgnoramus 3 жыл бұрын

"How'd he get it to run a full mag?" I mean, probably by reading the manual, lol.

@azazelakira12 3 жыл бұрын

I had a brand new one, read the manual, use the ammo recomended, never could get a mag dump, every 6 or 7 rounds got stuck. Also after try and try the firing pin broke...

@SuperCinemaCraft 2 жыл бұрын

@@azazelakira12 I'm sorry to hear that, have you contacted keltec? I just bought one despite bad things I've heard. I havent had enough 22 mag ammo to really put it through it's paces but of the 200ish rounds I did put though it I was surprised to not need any upgrading or tweaking

@MasQueVencedorEnCristo 2 жыл бұрын

Manual has nothing todo replacing the cheap parts is the trick ..

@InvidiousIgnoramus 2 жыл бұрын

@@MasQueVencedorEnCristo It really is mostly reading the manual on recommended ammo and loading procedures. 9 out of 10 problems people seem to have with the PMR/CMR-30 and CP-33 can be attributed to loading the mag incorrectly or with the wrong ammo.

@SamplersAndThings Жыл бұрын

@@ranchlife8128 wrong. I had to send mine back twice. The first time because it would fail to feed on every single round. Mags loaded correctly per the manual and with recommended ammo. Got it back and it ran better, however, it freaking blew up in my hand in my face. Blew out the casing because it fired out of battery. Blew out the slide lock and the firing pin cover. Sent it back to the factory and they repaired it again. Runs fine now though 🙄

@late6812 2 жыл бұрын

Make a threaded barrel.

@samlind8330 Жыл бұрын

Well over a year and STILL waiting for the RDS mount.

@kenardwasmer997 Жыл бұрын

I want one where do I get it

@summers9911 2 жыл бұрын

Are the open sights still operable? And what about a holster?

@tampabayspearfishing5297 2 жыл бұрын

Holster is in the works currently by MCarbo, should be out soon!

@raiderswish Жыл бұрын

Appreciate the product and effort. But that dot mount looks like a product off wish. Wish it occupied less space. Always a great job on improvements Tho.

@SurrealViews 3 жыл бұрын

Very curious as to the potential price point of a MCARBO PMR30.

@northeastslingshot1664 3 жыл бұрын

Im guessing $500 add on with all the bells n whistles.

@lancefarnsworth8089 3 жыл бұрын

I like it very nice but how in the world do holster it was that red. So close to the front that would be weird to holster

@tampabayspearfishing5297 2 жыл бұрын

MCarbo is working on one currently, not as weird as you would think. Feels great, hoping for a soon rather than later release date!

@deplorabledave1048 3 жыл бұрын

I am a big McCarbo fan. Often I want to buy the featured guns in your videos JUST so I can install your innovative upgrades! I am a well above average Armorer and builder.(and TINKERER!) I just love your videos and products! I used your Glock polishing guide plus a LW UAT, Ghost Edge connector, plus some tips from Johnny Glock to create the best G42 on the planet! So, I say. :) For me, anyways...LOL Thanks for what you do.

@deplorabledave1048 3 жыл бұрын

I know you don't sleep. I work graveyard shift, so this is my awake time. Peaceful. Go back to your PM30 bundle video. I have one long comment where I link(on Amazon) something for $18.00. You will very likely want that item.. D)

@DeMartaviousTaylor 2 жыл бұрын

55 or 60rd mag

@summers9911 3 жыл бұрын

Be nicer if the mount curved towards the back & had a space so the iron sights could still be used,& that would have distributed the weight towards the back. JMHO

@tampabayspearfishing5297 2 жыл бұрын

Failure for casings to eject if this is done.

@jaredevildog6343 3 жыл бұрын

I can't find a PMR30 anywhere. Can I buy one from you please . Then I can buy the kit.

@blacktoastmcbiscut8650 Жыл бұрын

Kel TEC may as well make mcarbo an official partner is they aren't already. Just have mcarbo manufacture their internals, since keltec keeps making plastic trash internals. Loved my s2k but basically bought two to make one gun worth a damn.

@shalafi71 Жыл бұрын

What does the upgraded buffer do?

@billyquin3216 Жыл бұрын

Doesn't wear as fast as the OEM buffer.

@gottifromthel2872 Жыл бұрын

My kel tec pmr 30 is fresh out the box and it jams every other shot, literally, should I sale it or what?

@ricklane1693 Жыл бұрын

Let me know when you have it all together as a working platform that I can buy and Shoot without having to go to work doing instillations to make it right.

@billyquin3216 Жыл бұрын

KelTec has a warranty.

@nolbertparrajr4981 2 жыл бұрын

17hmr p30

@9571kent 3 жыл бұрын

Is there a link to the buffer? Tried to click it in the email but it only brought up sub2000 parts.

@MCARBO 3 жыл бұрын

www.mcarbo.com/kel-tec-pmr-30-peek-performance-buffer-heavy-duty-takedown-pin-upgrade-bundle.aspx

@9571kent 3 жыл бұрын

@@MCARBO Thank you! That was the last internal part I needed. I melted a few with a can and rapid firing. I'm excited to not have to worry about that anymore

@texas66 3 жыл бұрын

Where do I send my money???? I'm not a fan of the red dot mount, I find the factory irons (fiber optic) are good enough to hit a popper 5 times as it falls... But I need a new buffer and all the help it can get!

@OneofMyTurns 3 жыл бұрын

Keltec sells new buffers and there not $30 a piece.

@michaelatkin9649 Жыл бұрын

Cool but this upgrade is the price of the the gun. If your gun doesn't work you send it in to keltec and they'll fix it. I really don't see paying essentially $600 for the pmr after your upgrades

@randymiller489 Жыл бұрын

if you take 6 of them and tye them together might make a good boar ancor,.

@randymiller489 Жыл бұрын

so should i send it back and have it remodeled? when it works it is eligeant just not realiable.

@mikewiggins4647 3 жыл бұрын

We need better mags something besides plastic, these keep jamming every third round

@christiangray3304 3 жыл бұрын

Make the M series!!!!

@chadb1878 3 жыл бұрын

I 2nd that

@chuckdawg2799 3 жыл бұрын

wanted one forever, but always too many issues.

@davidtate166 Жыл бұрын

Improve the gun .got kinks out of it .very 😎 gun did it.

@dbrannon4 3 жыл бұрын

What's the " M " series mean????

@chadb1878 3 жыл бұрын

M = Mag dump aka MCARBO version? I think all the mod's offered through MCARBO in a factory version. Not positive, but probably the case

@dbrannon4 3 жыл бұрын

@@chadb1878 Yep that makes sense. Now if we can just get some ammo right?

@chadb1878 3 жыл бұрын

@@dbrannon4 Aw man, isn't that the truth, 22wmr doesn't show up too often. I think Optics Planet may still have to Speer Gold Dot at twice the normal price and MidwayUSA had some Savage specific a couple hours ago.

@timmcdaniel6279 3 жыл бұрын

I was truly surprised when 22 magnum ran out I thought it was such a specialty round that there would be plenty I come to find out that the factories that make them shifted their focus to more common rounds like 9 mm that's why the shortage. Having said that I kind of stopped going to gun shows a few years back as they were boring, expensive and packed with idiots etc I've recently started to go to gun shows again and I have found 22 magnum every single time!

@chadb1878 3 жыл бұрын

@@timmcdaniel6279 Good idea on the gun shows....it's been a while since I've been and didn't really think to look there.

@dancoleman8467 Жыл бұрын

Can I ship mine to you and have you tweak it out to perfection? Do you have a phone or email so I can contact you?

@MCARBO Жыл бұрын

Hey Dan. Shoot us an email help@mcarbo.com we'll get you taken care of

@samdunlap5365 Жыл бұрын

If they are running flawlessly why would you need upgrades

@roygorman6624 2 ай бұрын

I did not hear the price of this kit, but the computer said two hundred and fifty dollars. I already have a severe case of red ass in messing with this junk, so I will have to think about that one.

@walentinkostenko6369 2 жыл бұрын

Got my PMR 30 a week ago and spent cartridge does not fully eject every single round…tried Winchester and Hornady, made no difference…slide just does not operate smoothly…managed to get off two rounds after firing 50 rounds but I’d return it if I could…😡😡 very poor quality control on these handguns for the price…