Liqui Moly Sludge Remover vs Liqui Moly Engine Flush (Which is Best?)

Рет қаралды 1,896,636

Жыл бұрын

I tested Liqui Moly Sludge Remover to see how well it removed sludge from an old engine. A phone call to Liqui Moly headquarters in Germany helped clarify which product is stronger. Here's a hint, the said that their sludge remover product (# 5200) is not intended for the US market, but that the Engine Flush (# 2037) is. That doesn't stop 3rd parties from selling it on Amazon though.
Liqui Moly Pro-Line Engine Flush: amzn.to/3o93BMP
Liqui Moly Sludge Remover: amzn.to/40w6CIE
As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 789

@OwenLucas Жыл бұрын

Liqui Moly Pro-Line Engine Flush: amzn.to/3o93BMP Liqui Moly Sludge Remover: amzn.to/40w6CIE Step by step flush procedure: 1. Pour 1 can of Liqui Moly Sludge Remover into your engine. 2. Drive for 124 miles (200km) without wide open throttle operation. 3. Drain oil and change filter. 4. If you want to remove any remaining sludge, Refill oil to full capacity and run engine for 10 minutes or go for a short drive. 5. Drain oil again (to remove any remaining old oil and left over sludge) and change filter. 6. Add new oil and you are finished.

@andy2906 11 ай бұрын

Please buy a funnel your giving me OCD

@jaywholoveseveryone1721 4 ай бұрын

@@andy2906 ...and PLEASE catch that drain plug before it falls in that oil! 😂But, I really learned a lot from this video. THANKS OWEN LUCAS for doing this test ❤

@andy2906 4 ай бұрын

@@jaywholoveseveryone1721 are YOU Talkin' to ME?

@meetsaini990 8 күн бұрын

I want to know can we drive the car for some miles after adding engine flush

@Davo_1991 6 ай бұрын

That risky free pour, this guy has balls

@ramonciprino5880 2 ай бұрын

@Davo_1991 2 ай бұрын

@@ramonciprino5880 how do you not get it?

@minnesnowtan9970 8 ай бұрын

"Sludge remover" sounds more powerful to me than "engine flush". Thank you for pointing out the difference.

@bdtaylor1979 Жыл бұрын

Might be time to switch from a Bluetooth funnel to a real funnel 😂

@99ekcouper Жыл бұрын

He likes funholes

@Druze_Tito Жыл бұрын

Good one!

@armenmed122 Жыл бұрын

Lol

@dillonostrum9264 11 ай бұрын

I've seen people spill more oil with a funnel than this man did

@bravebrowser261 10 ай бұрын

@jimizbikowski4112 Жыл бұрын

So I've been a mechanic for 21 years... back in the day there was a machine called a motorvac system for engine flushing... drain oil, take off filter. Attach hoses and adapters to oil filter neck and drain plug... the machine was kept plugged in to an electrical outlet all the time to keep the solvent at 125 degrees or hotter (again this is years ago). Machine used a micron 3 (I believe) filter. Machine pumped this hot fluid through the engine 5 or 6 times, took about 30 min after hook up.. and when I tell you it FLUSHED EVERYTHING I'm not lying.. oil pressure was spot on.. and even weeks later the oil looked as if it was a new car... the stuff in a bottle works sure but gotta do it 5 or 6 consecutive times keeping engine hot and changing filter each time

@OwenLucas Жыл бұрын

That is quite a machine! I question what shops do nowadays but with equipment like that, you get what you pay for.

@uroskostic8570 8 ай бұрын

@@OwenLucas Well, you can make scuh a machine, easily. Electric heater for central heating, electric oil pump, and hoses. But, you can also use diesel, and flush it 2-3 times, thats cheaper method.

@kingpickle3712 2 ай бұрын

I remember watching someone do that while waiting for my vehicle. I was fascinated by it for some reason 😂

@wlkthewlkofjc8885 2 ай бұрын

Company still exists. The machine you mention is discontinued. You can still get the manual off their site.

@Ravsawicki1 2 ай бұрын

Yot engine was really dirty inside, and finały was cleaned after 200km, cause working longer and soecific could make his job.

@one7decimal2eight Ай бұрын

On oil analysis for each one would have been the icing on the cake.

@tssci6774 Жыл бұрын

Finally, someone that does full volume oil change before using a flush. 10-20%of old oil will remain. I perform a clean oil flush once a year. Let's the new oil perform better and for a longer time. The darkening of the oil is normal from heat and blowby contaminants. Heat new oil in a stainless steel pan, up to 220F, several times. It will become dark. A better way to measure the performance of these flush products is using oil particle count test. It measures all particulates from 4-30 microns, and is a recognized as an industry ISO standard for oil cleanliness. A full oil analysis costs about $40 USD. Good video, much better than 100s of videos on flushes that don't rinse the engine.

@OwenLucas Жыл бұрын

Interesting that heating the oil alone discolors it, the 126 mile drive was 2 hours almost non stop so the engine definitely got up to temperature.

@tssci6774 Жыл бұрын

@@OwenLucas keep up with methods, bring common sense to the many car myths out there.

@wallerwolf6930 11 ай бұрын

Yes, this is completely correct, every oil becomes darker again after a short time, after just a "normal" oil change, without such a remedy, it can even look very black again, like after thousands of kilometers. Good to see if you manually measure the oil level on the stick. The Liqui Moly still had a cleaning performance here, because particles could be seen again in the filter after only a few kilometers of driving.

@trvman1 2 ай бұрын

So basically it close to $150.00 to do this. 4 oil changes (if you do it yourself) and engine flush.

@arlokkkk Ай бұрын

how many oil changes before using the flush on a 65k mile car do you think is necessary to do a good flush?

@grizzle273463 11 ай бұрын

That was awesome. Thx for taking the time to make this.

@SimTrixSon 10 ай бұрын

Man I been looking for a really in-dept video about the liqui moly engine flush and this is perfect!

@OverlandOrange Ай бұрын

I used Engine Flush on my 2005 Tacoma w/ 234k, with issues impacting the timing chain. Replacement of the chain was recommended to the tune of $4,500. $18 Engine Flush and 1 extra oil change to flush it all out, and my truck drives like new and no longer needs the repair. NO exaggeration, this stuff is awesome.

@OwenLucas Ай бұрын

Glad to hear it worked out! 💪

@ShikiKaze Жыл бұрын

I am glad someone on KZfaq has the brains the use a proper oil filter cutter. Everyone out here trying to kill themselves with an angle grinder or lose an eye with a sawzall.

@OwenLucas Жыл бұрын

Agreed, $25 well spent. Its tough looking at a filter cut with a saw as you cant tell what metal or contaminants are from the saw blade or the engine.

@ShikiKaze Жыл бұрын

@@OwenLucas That's the issue with most of the reviewers just cutting into it with power tools. I can understands tin snips. But when they say try as best they can to not contaminate the filter but then proceed to cut with a power tool it makes their effort moot. Great job on the thought process. Subbing for that.

@daijonwillock3693 Жыл бұрын

If you plan on flushing your oil, it's important to consider that 5-10% (not an exact figure) of the old oil may remain in the oil pump and other parts of the engine, even after draining. While flushing can help break down sludge and make it easier to drain through the oil drain, it's important to note that the contaminated 5-10% of old oil left behind can mix into the new oil, degrading its quality to some extent. Keeping up with your recommended oil service intervals and using the recommended oil standards from your car manufacturer can help you change the oil before it degrades and forms carbon deposits. This will allow you to replace the old oil with new oil, keeping the lubricating benefits of the new oil and avoiding the need for engine flushing. However, if you want to truly flush your engine, you can use an engine flush product with the old oil and then drain as much contaminated oil as possible. You can then top up the oil twice, once to dilute the remaining old oil with minimum negative deposits and then the second top up you can then add the new oil to complete the oil service and keep up with your oil service intervals to prevent future issues. Using oil additives that enhance the engine oil can also be useful in preventing carbon build-up and extending service mileage, but it's still important to change the oil on the manufacturer's recommended mileage basis. Engine flushing may not be necessary or practical for every oil change, and it could be a waste of money if the oil is being changed correctly. However, it can be useful for older cars with high mileage.

@ruudhermans8024 Жыл бұрын

Loo

@BenState Жыл бұрын

Exponential decrease with oil changes.

@flycorvus Жыл бұрын

If your car is abused by previous owner, good luck!

@oluskloc Жыл бұрын

Best flush is add 1liter of kerosine to old oil, run for 10-30 minutes, not on idle but avoid heavy load for engine just light driving or some idle and moderate rev (2-2.5k rpm) on neutral. Drain everything, change oil filter use just cheapest one. Buy cheap synthetic or semi-synthetic oil 1.5 times quantity You need for Your engine. Remove Your spark plugs and add about 100ml of kerosine into every cylinder, leave it overnight. Next day turn engine with statrer still without sparkplugs to avoid hydrolock and remove excess kerosine from cylinders (probably there will be none anyway, all or most drain down to oil pan through piston rings softening carbon deposits but just to be safe check it). Put sparkplugs back. Now add 50:50 mix of oil and kerosine to Your engine top it off. Run it on neutral with moderate revving (or very very light driving) for 30-60 minutes. Drain everything, change oil filter for cheapest one. Top up engine with cheap oil to clean the residue. Drive on it short time like 100-300 hundred km/miles. Drain oil and replace oil filter. Now use quality oil and filter. You're ready to go. Change Your oil and filter often, I do it usually between 10-12kkm or 6-8k miles even my car manufacturer recommends like 20-30kkm/15-20kmiles oil changes which is ridiculous but welcome to europe. This will not only clean the engine oil system, also piston rings and combustion chamber, big chance to reduce or even eliminate oil consumption of engine, make it run better. Many times oil consumption is not because of worn piston rings it's because they are stuck with carbon deposits (some natural due to long use of engine but mostly because not changing oil on time before). If You willing to spend more money You add some engine flush instead of kerosine like 50% oil 25% of kerosine and 25% of engine flush, it will be even more effecient. Don't use like some people 100% kerosine or diesel fuel instead of oil because You will have too low engine oil pressure so one you risk damaging engine second with low oil pressure and flow it doesn't work as well

@anirudhaarvind1736 Жыл бұрын

Is it a myth that flushing an older engine causes it to spring leaks ?

@noob_mechanic Жыл бұрын

Thank for the time,effort and money spent in the making of this video for other people benefit...salut

@jaywalker6464 7 ай бұрын

I love the video, straightforward no bs.

@ethanmcquaid1 4 ай бұрын

Incredibly thorough! Love your attention to detail! Definitely subscribing.

@tbryan1697 6 ай бұрын

Really good video quality and close ups. Thorough experiment with inconclusive results. Great effort. Thanks!

@OwenLucas 6 ай бұрын

Thank you very much!

@trvman1 2 ай бұрын

Yes, basically all it does show if you change your oil 3 times in a row it comes out clean.

@nas979 Жыл бұрын

To answer your last question you could have done another oil change after driving same km when added the sludge remover and see if the discolouring was due to driving that distance or due to the sludge remover.

@sylvainr.399 Ай бұрын

Totally agree. I was going to write that exact same comment. I would have actually loved to see that, which would have truly completed the test.

@MrUsaer 19 күн бұрын

Yep. Ended test early. Had no money for gas. Spent it all on oil. Regardless, great video!

@YazidiOmar 4 ай бұрын

Best test i ever see in youtube thanks for your time and investement

@georgelynch6139 11 ай бұрын

They make a thing called a funnel, they work great

@derbrandmeister4660 11 ай бұрын

Very good effort you made for this video! Thank you very much!

@wallerwolf6930 11 ай бұрын

Great test, which is obviously very meaningful. The stuff works!

@kinsmart7294 11 ай бұрын

After these intense flushes its always an good idea to drop the oil pan and open the oil pickup filter and clean the pan. Sometimes the interior of the oil pan is painted and the flush can remove the paint and make it clog the oil pickup tube.

@pitik 7 ай бұрын

Very good test... . Thank you so much.

@DunOpondo Жыл бұрын

Great comparative video 👍🏿. You should also compare that Bizol oil system clean+ o90, does a great job

@NoHandleAT Жыл бұрын

The color of the Oil is not related its cleanness, If you boil Engine oil it turns dark/black. Do the test, put some engine oil on a pan and cook it for a couple hours you will see it turn black without absolutely no "contaminants".

@OwenLucas Жыл бұрын

I will take your word for it, no need for me to bring motor oil into the kitchen, my wife would be very mad! Very good point though, as a previous commenter mentioned, particle count would be the definitive test.

@Hernsama Жыл бұрын

I second that. When I bought my new car I did an oil change at 500 miles and 1k miles and it was brown both times. It had little hint of gold but that’s about it.

@Athiril Жыл бұрын

Fresh oil also doesn’t come out that dark after 125 miles

@jackylsmith8138 Жыл бұрын

@@Athiril if it is a diesel it will come out black. It is designed to.

@shckltnebay Жыл бұрын

@@Athiril Disagree

@alexanderbarth8320 11 ай бұрын

Good job. I never thought somebody would go through all this struggle. That was good information.

@isaacjrv 5 ай бұрын

What a video. Amazing, from my experience as I change my own oil, synthetic oil gets darker quicker than conventional oil due temperature, you can see this in other videos as well when they use pots with high heat, gunk in the oil will vary from engine to engine, as I remember my old Toyota pickup truck will get the oil pretty dark within 3000 miles and my Hyundai accent GDI was not as dark after 7000 miles and not as full of gunk as the old truck, but definitely color in newer oils is not actually an indicator as when heated will darker quickly anyways.

@CJ-yf5cr 11 ай бұрын

Thank you for taking the time to do this. I'm getting my oil changed soon and this really helped me. 👍

@OwenLucas 11 ай бұрын

Glad it helped!

@maliknolan5711 Жыл бұрын

THANKS FOR THE VIDEO MORE CONTENT ABOUT LIQUI MOLY PRODUCTS ❤

@Apegabe Жыл бұрын

Liqui-Moly products just work! Great video.

@theredscourge Жыл бұрын

Nice touch leaving the drain plug to get covered in the oil drain pan to annoy the OCD types X-D

@roshansanju341 8 ай бұрын

What a detailed explanation... Wonderful.. wonderful 👍

@OwenLucas 8 ай бұрын

Thank you Sir!

@Atilolzz Жыл бұрын

Can we all appreciate the precision at 1:10?

@swaggerjacker1482 11 ай бұрын

Um, did you see the not precision at 3:14????

@e46imolared Жыл бұрын

Video is which i exactly looking for and thanks for effort

@uranusneptun5239 Жыл бұрын

I did two flushes with the sludge stuff in combination with cheap BUT SPECIFIED oil for my engine (a 1.9 JTDm). It worked wonders! I initially planned to do at least 3 flushes because the engine didn't look well maintained but this has been enough. I then filled up with high quality oil, also Liqui Moly and during every oil change and flush I used a new oil filter also a Bosch quality part. I'll repeat this process before the next oil change after 10k km and will probably continue to do so. To get it even more clean and let it stay clean. Engine has almost 200k km on it.

@OwenLucas Жыл бұрын

Is the engine in an Alpha Romeo 159? That is a beautiful car. Glad to see the flush worked out for you! A good oil with a lot of detergents will also help clean your engine between flushes.

@averagedev7768 Жыл бұрын

I must ask where you found a 1.9 JTDm with less then 200 000km. The dash bight be showing that but trust me not a single one has that milage. None the less that is a very reliable engine. I suppose you got it in the Alfa 147 or 159 or in Fiat Stilo

@Druze_Tito Жыл бұрын

10k is a pretty long interval

@eponymous7910 Жыл бұрын

@@Druze_Tito not really. 6000 Miles. It's about average I would've thought

@Druze_Tito Жыл бұрын

@@eponymous7910 average doesnt mean anything. It is too high. I dont recommend going more than 6000 km no matter the oil. If you love your car.

@rocker19061 5 ай бұрын

Hey, noce video. But whats the name of the tool you ised to open the oil filter?

@Rns555 7 ай бұрын

Helpful video, could you say which one is the best to clean up sludge on pistons and valves?

@OwenLucas 7 ай бұрын

According to the LiquiMoly engineer that I spoke with. The pro-Line Engine Flush is the most powerful of their engine flushes. Regarding the valves, you will need a specific valve cleaner. Techron is works great along with LiquiMoly 2001 Valve Clean.

@Rns555 7 ай бұрын

@@OwenLucas thanks! 👍🏼

@steven4894 Жыл бұрын

Thanks for your research and due diligence on this important 🚗 engine topic.

@fastst1 11 ай бұрын

Also beware, sometimes if the sludge is really heavy, it can end up clogging the oil pump pickup screen. Used to add a quart or half a quart of ATF to an oil change, the atf has amazing amounts of detergents in it to keep the transmission squeaky clean. Keep going forward with regular oil changes.

@CrazyChiefXxX 11 ай бұрын

wouldnt that be hard on turbo bearings? if you drive a OEm turbo 4?

@Chris-nm1jr 11 ай бұрын

No it wont. So much detergents and emulgator in it.

@slimsherman5818 10 ай бұрын

Did you mean add to old oil to help flush and then drain, or to top off after fresh oil change. Thanks

@fastst1 10 ай бұрын

@@slimsherman5818 That's correct, 500-1000 miles before the next oil change a shot of ATF into the engine oil. The biggest generator of nasty sludge is cold thermostats, short trips and crazy intervals between changes.

@makgstefan 5 ай бұрын

i hear this answer all the time everywhere. Be aware that using engine flush can clog the oil pump or the pickup screen. Have you ever seen how big is the pickup screen and how big are the gaps? If you can clog this pickup screen it means your engine is tearing apart not just sludge. To clog this screen you need pieces of the bearings or the pistons. It is not so simple to clog the pickup screen. And if the engine can clog because of this it means you need a change of engine not just sludge removers.

@michaelmyers3892 Жыл бұрын

I have a 2002 Subaru AWD outback over 250,000 + miles on the original four-cylinder engine smoking none of that stuff but 95% of those miles or all highway so I burned up most of your carbon and sludge because of that but now I'm doing a deep dive and going to give her a thorough cleaning and that includes dropping the oil pan cleaning out the pick up screen and oil pan you in a double flush and clean she's worth it she's been a super reliable car all over the United States including the Rocky mountains

@OwenLucas Жыл бұрын

Interesting, give it a flew flushes first, might be able to avoid pulling the pan off. Congrats on taking care of the car to 250k! 💪

@michaelmyers3892 Жыл бұрын

@@OwenLucas she's been a remarkable car how many people underestimate the Subaru and how reliable they are just normal maintenance and these things will go forever

@gregs7519 Жыл бұрын

@@michaelmyers3892 make sure you replace the head gasket with the new MLS style if you haven't already done so

@ronaldq1653 6 ай бұрын

Good morning, Blessings, Greetings from San Carlos, Costa Rica, Pura Vida, question, I am new to this, which of the 2 liquids is first added to the engine, the engine cleaner or the mud remover, which is added first.

@E85_STI 8 ай бұрын

Did you get the oil analysis from black stone? I change my STI oil every 2,000 miles so my oil comes out almost golden still so I don’t use additives but I bought a 2008 acura tl type s last ,moth and want to do the flush like in your other video.

@OwenLucas 8 ай бұрын

I didn’t have a chance to. 2000 miles? You will never need a flush changing oil so frequently. I like the TL design of the 08 generation, very clean, have fun!

@scoremxcom 10 ай бұрын

get a funnel.

@dimmacommunication Жыл бұрын

I prefer the new interchangeable filters :) with top mounting, no oil mess and way easier :)

@noahlapuz3853 6 ай бұрын

Beautiful demonstration!

@OwenLucas 6 ай бұрын

Thank you!

@cbidwell91 5 ай бұрын

Good chance the color changed due to temperature from your drive. Oil turns black simply by getting hot, but the little chunks you got out are a good indication that the product was helping. Cool video, and at the end of the day it can't hurt to try and flush an engine. AMSOIL has a similar product as well.

@datsuntoyy 5 ай бұрын

No it doesn’t. If your oil discolors from getting hot, you have some seriously bad oil.

@TheRatTravels 5 ай бұрын

Blow-by occurs when combustion gases and possibly some unburned fuel pass by the piston rings and enter the crankcase. These gases can contain carbon from the combustion process, which then mixes with the engine oil, causing it to darken. If the piston rings are worn out or not sealing properly, blow-by can increase, leading to more rapid oil discoloration.

@cbidwell91 5 ай бұрын

@@datsuntoyy Yes it does. It is a well-known characteristic in the oil industry around thermal/fluid dynamics. Simply heating oil in a beaker will turn the oil black. Now, there a many other factors which can contribute, but oxidation and heat will turn the oil from its gold color to black quite quickly. Project Farm has some great oil testing videos (much of which can be subjective) but he will heat up oil on hot plates and after 30 minutes of heat the oil is black.

@datsuntoyy 5 ай бұрын

@@cbidwell91 Burning oil will turn it black, ordinary use doesn't get that hot. I've seen plenty of oil samples in my 50 years of working on cars with a few hundred miles that have no color at all other than the light amber it comes with. Likewise, MANY years ago I've seen brand new oil that's nearly black. Hot plates get a lot hotter than a car engine does. My car's maxes out at 220 (hottest I've ever seen it) yet my hot plate can get over twice that. In his test he's heating it to 400 degrees and flashpoint of Mobil 1 5w-30 is 440 so he's heating it to nearly catching on fire. He also talks about the oil smoking, in cooking it's called the smoke point and oil burns when it his the smoke point.

@bluesideup7891 Жыл бұрын

Very interesting thank you for the test!

@OwenLucas Жыл бұрын

More are coming soon!

@BhavinTolia 8 ай бұрын

What did you do with the oil filled with the 3rd oil change ? Is it ok to use this (almost clear) oil again ?

@OwenLucas 8 ай бұрын

Bottled it up for my next oil change, completely good oil. 👍

@ambrogiogatti3429 Жыл бұрын

Questo è l'esperimento più completo che abbia mai visto. Complimenti!! Io tuttavia non uso i tuoi prodotti, uso il Liqui Moly Clean 1019 Non ho mai fatto le tue prove, ma sono convinto che un po' di pulizia all'interno del motore la faccia.

@OwenLucas Жыл бұрын

Grazie per i complimenti signore. Non ho sentito parlare di Motor Clean 1019. Non è disponibile negli Stati Uniti, ma vedrò se riesco a procurarmene uno. Liqui Moly produce così tanti prodotti che la loro gamma è davvero impressionante. Grazie ancora.

@free2chasehappy Жыл бұрын

I wonder how much the Engine Flush could clean out after running the Sludge Remover… Great vid!

@OwenLucas Жыл бұрын

Interesting question, you would hope it got everything.

@monkehbitch 5 ай бұрын

The base line would be to see if you actually had any sludge build up in the first place by taking off the valve cover. I guess the only thing you did really was super clean your engine. (Never a bad thing)

@n0isiv 4 ай бұрын

great video. did wish that you did 1 more oil change after the flush and see if 140 miles was dark again and if there were any particles.

@blacksparrowsparrow5467 2 ай бұрын

Very informative.. thanks Can u pls tell me if I need the same amount of flush oil that's come out of the engine or can I use half of it ?

@OwenLucas 2 ай бұрын

You have to use the same amount of oil.

@dillonostrum9264 11 ай бұрын

It definitely was a good cleaner as ive seen lighter oil on diesels after 200 miles since an oil change

@tomkoolman 8 ай бұрын

How long you have ran the engine between each change on the video?

@OwenLucas 8 ай бұрын

20 minutes.

@Ram14250 Жыл бұрын

I think that 3.6 L GM V6's are very shootie engines when they combust fuel. I think the oil will get darker just by driving. Those little particles you found in the oil filters are just from driving and the oil collecting shoot. It was a fun video to watch though!

@shanetseng6040 Жыл бұрын

The test was almost perfect!! Only part thaz missing is to keep the constant of 160miles drive between every single fill and drains (and you said it too). But good test tho overall!

@OwenLucas Жыл бұрын

Thank you! Yes, that's basically 2 hours of driving, would have been a lot of filming time lol.

@shanetseng6040 Жыл бұрын

@@OwenLucas yea, right! lol

@IvanToman 11 ай бұрын

You forgot last part of experiment. Drive another 200 km now without any cleaning aditive and drain again. If you see significant difference between that and previous sample than it works; if it is again similarly dirty then it does not.

@abdo2010wwe Жыл бұрын

Good job test 🎉

@OwenLucas Жыл бұрын

Thank you sir!

@kris856 Жыл бұрын

Please try some Archoil or Oilsyn Powercleaner... I used to use LM, but after I came across the AR stuff, which I consider to be the best ones on the market, I will never try anything else

@pineappleboi27 7 ай бұрын

What were the intervals between fluid changes?

@OwenLucas 7 ай бұрын

20 minutes.

@TheSupergunman3000 Жыл бұрын

Keep up with this content and you will reach 100k in no time, accurate testing, direct to the point, helpful information, can be better with better editing and camera work, also possible improvements in lubricity testing but this will happen naturally with time Keep up this good content testing different products for cars (but not necessarily)

@slozanov5330 Жыл бұрын

very good test

@factsnotfeelingssendit5961 Жыл бұрын

Quart of diesel idle 10 minutes drop oil. Repeat if necessary. Seafoam in the crank works well too.

@mrcoupe289 9 ай бұрын

If engine wasn’t regular flushed be careful!! 2 liter of diesel /solar

@joehardy7984 Ай бұрын

To help answer your question about the darkness after the moly flush. Molybdenum disulfide is a dry lubricant somewhat similar to graphite. It’s a fine black powder mixed with whatever else is in the engine flush. The results can seem a little misleading. It gives the appearance of more contaminants being removed when really it just turns things dark. It’s used as a thickener in complex lithium moly grease. Great for ball joints and cv shaft bearings (not the tripod gears in the shaft). The thickening effect is why they recommend keeping away from full throttle circulation. The idea with the moly isn’t to clean anything but to coat the engine components allowing them to have the additional lubricating affect from the moly. Not sure there’s enough moly in the flush to have any real impact.

@OwenLucas Ай бұрын

Very interesting points. I’ll have to check the MSDS to see if there is moly in the flush, if they even disclose that. Would be interesting to see if LiquiMoly turns new oil on a new engine dark! The part about thickening is interesting as I thought the solvents in the flush thinned the oil. Thank you for your insights!

@drumvannelle69 Жыл бұрын

Great video 👍

@ugniusskeivys972 Ай бұрын

I used fluch on my old ford transit mk6, I couldn't believe the result, there was no more smoke and the engine started with half a turn of the key. I recommend!!!

@lawrencecavens5760 4 ай бұрын

You have to remember that the Sump will have sludge that builds up over time and will get washed out with solvents. To help prevent this condition use WD40 in with your oil. 1 cup will work fine and clean all internal parts and you will also find that oil changes will be abit fewer that you'll need as the engine is getting a gentle clean out. I did this with a 2008 Ford F250 Super Duty and great results happend as I let the WD40 work with my oil my engine has returned to near factory condition. One of my lash adjuster was starting to stick when the engine was at operating temp and light ticking was heard - on cold start up it was all quiet - So i tried this in adding WD40 and It sure worked and freed up what ever the stickiness was at the lash adjuster and no more tick .

@silkroadm6380 10 ай бұрын

Thanks for the video, I recently bought Mercedes 2013 Vito van 122 CDI V6 engine. I’m really keen to add CeraTec Liqui moly oil additive just wondering does that do any harm for engine or cause any oil leaking any recommendation or any experience you have is Highly appreciate it .

@OwenLucas 10 ай бұрын

I’ve heard nothing but good things about ceratech. It’s an additive not a cleaner. Shouldn’t cause any leaks at all.

@silkroad3210 Жыл бұрын

Hi there, Thanks for the video I have Mercedes’ Vito van 2013 122CDI WANNA add liqui moly CeraTec on next oil change Would you recommend it ? does it have any harm for engine or DPF system? Thanks in advance

@OwenLucas Жыл бұрын

According to Liqui Moly: "Safe with catalytic converters and particulate filters (GPF/DPF) as well as for belt-in-oil systems. Contents (300 mL) is sufficient for 3-5 Liters (0.9 gal. to 1.3 gal.) motor oil. Long-term effect up to 50.000 km (30.000 miles)." So yes it is safe, enjoy!

@ClarVad 2 ай бұрын

I was taught that your oil turns black no matter how clean the engine is. There is always some stuff that gets past the rings on the piston and gets into the oil. Great video.

@thomaslam6821 Жыл бұрын

Great video! 👍👍👍

@Richpeopleneedatax Жыл бұрын

Gonna do a BG epr flush on a Camry with 165000 miles. I’m gonna change it twice but changing the oil filter one time because it’s a real pain dealing with. Should be fine.

@CJCarsPhotography Ай бұрын

Did you have the phone of them ? they didn't answer to my mail. to know if we can mix or add in extra 2 oil additive together, One witn MS02 and another with Ceramic.

@OwenLucas Ай бұрын

The phone number was on the website, it was a long distance call to Germany.

@m.pietro9087 11 ай бұрын

Thank you for this good video. Regarding the color of your oil I don’t think 200 miles drive is enough to make the oil look dark. It must be the result from Moly cleaning.

@knallaff 6 ай бұрын

It's so. I use a cleaning additive from Mathy and I am absolutely convinced that these additives cause more dirt than a normal oil rinse would ever do.

@bneli5632 9 ай бұрын

Hello my friend, I have several questions about the video you uploaded I wanted to ask how long do you run with the engine flush before you drain it? (How many minutes?) And how long after that do you run the oils that you then drain? Because you did a few flushes with new oil during the cirton, so I wanted to know how long you run them in the engine before you drain? Thank you my friend Waiting for a reply because I also want to do this process And I wanted to know that I understand the process one hundred percent Thank you

@OwenLucas 9 ай бұрын

For the Pro Line Engine Flush you run the engine 10 - 15 minutes, just idle, no driving. For the Sludge remover you have to drive 200kms with the flush in the engine, light driving. The flushes I did before the sludge remover are not necessary as they were to achieve a clear engine oil to show if there is any difference with the sludge remover. It would be a waste to change oil before the flush. But after the flush you change the oil and filter.

@johndangelo9630 Жыл бұрын

I would have sent the oil samples to get tested. You may discover that the sludge, and engine flush products may have also introduced contamination to the engine bearings... to begin that slow wear...especially if the additives also had an opportunity to bypass the oil filter.

@roninm5 4 ай бұрын

Thank you for the video. Can we perform fluid flushes on a newer engine? My ‘20 Silverado has 150k km and I was thinking about doing the same.

@OwenLucas 4 ай бұрын

150km is a good time especially if you worked the engine hard but if it was all highway miles, maybe wait another 50k.

@johnstopford9633 8 ай бұрын

No the low milage drive would not change the motor oil that dark. I would say its due to removal of contaminates after the final oil drain with sludge remover.

@marcasswellbmd6922 11 ай бұрын

You should have just used it and then did drain and fills to see if it continues to break off carbon after the oil is changed.. Thanks great vid..

@PetrolHeadBrasil 11 ай бұрын

Nothing like having enough money to do 3 oil changes for a KZfaq video...one day I'll make it!

@OwenLucas 11 ай бұрын

I haven’t made it yet! I actually got those oil jugs at Amazon on clearance for about $5 each lol.

@PetrolHeadBrasil 11 ай бұрын

@@OwenLucas WOW!!!! 5 bucks?! That was cheap indeed....

@gemnicherry2670 3 ай бұрын

So I’m considering doing this on my car and I mainly talking about the oil change after oil change after oil change to get some of the free, floating sludge out. My question is can you use the cheapest oil and filter possible for the ones that you are rinsing through and then throwing away? And then on the final one just put the proper spec oil? Also I am doing some research on engine flushes because I have a direct injection Audi V6 motor with a turbo and I’m having issues with mild oil consumption. Also, I saw a video on here of a guy using something called B12 and he poured it right down the hole where the spark plugs go let it sit for six hours, then rotate it and then repeat the steps.

@OwenLucas 3 ай бұрын

Definitely use a cheap oil filter for the flush. Regarding the B12 Chemtool. It can be used for a piston soak to free up the oil control rings which have most likely jammed and are letting oil into the combustion chamber. It’s worth a shot and I’ve heard some people have success.

@sanjeevbhaskar5472 5 ай бұрын

Change oil every 4 months and oil filter every alternate oil change, you won't need any sludge remover or flush for 300,000 kms.

@OPTIMUS6LTR 3 ай бұрын

do you open cans of food like that too?

@felixlafuente9714 11 ай бұрын

Great Video!!

@jacksonmagriplis6617 8 ай бұрын

I would be measuring ppm per hour wear rates and what was your soot loading? Do 5000 kilometre oil and filter changeouts

@OwenLucas 8 ай бұрын

No idea, I didn’t run an oil analysis but those results would be interesting to see.

@RickYt001 2 ай бұрын

nice test. appreciate

@OwenLucas 2 ай бұрын

Thank you!

@arthurmroyce Жыл бұрын

Back in the day, we threw in a quart of kerosene and let the engine idle for 20 to 30 minutes. Then we changed the oil and filter.

@jimizbikowski4112 Жыл бұрын

Kerosene or diesel!!! Or... Trans fluid! Old school fix right there!

@_TheBreaker_ Жыл бұрын

A bit of Trans fluid is a cheap lifter tick fix

@hayabusettofficial4469 11 ай бұрын

@@jimizbikowski4112wont kerosene and diesel will make oil seals bcome bad ?

@nikilurs6689 8 ай бұрын

Which the best bike oil sir

@OwenLucas 8 ай бұрын

What kind of bike?

@twanahawrami7691 27 күн бұрын

Good job thanks 👍👍👍👍

@shaneintegra 10 ай бұрын

Were you running the vehicle before the oil change intervals? And for how long?

@OwenLucas 10 ай бұрын

Yes, 20 minutes of idling.

@_jurist Жыл бұрын

Dude, get a funnel

@OwenLucas Жыл бұрын

😂

@joelnrs 6 ай бұрын

Living life on the edge without a funnel 😂

@adjes2010 Ай бұрын

😂😂😂😂

@tj-hero 11 ай бұрын

i really thank you for sharing your video with us 🙏🌹🌹🌹

@OwenLucas 11 ай бұрын

My pleasure 😊

@91bravo0317 Жыл бұрын

Does no one use the old transmission fluid trick anymore?

@shahreeyman 5 ай бұрын

After seeing this video, I need full engine opening video, to confirm my doub

@ForkInTheButt 11 ай бұрын

As one of hondas engine engineers said, never do this to a high mileage engine as it could cause more problems by clogging holes with debris. Leave the engine as it is

@eviltwo7950 9 ай бұрын

Is this true

@jayw900 6 ай бұрын

@@eviltwo7950 No idea about what a Honda engineer said. However, it's for the same reason it is not recommended to do a tranny flush in a high mileage car that has never had one done before.

@jamespolucha8790 5 ай бұрын

Did you use synthetic oil when flushing it or just cheap oil ?

@OwenLucas 5 ай бұрын

All I had is synthetic on hand but I would prefer to use the cheapest kind.

@crabapple6775 8 ай бұрын

I have several unopened various brands of oil. I consider them to be a lesser grade than the Castrol high mileage synthetic blend I am using. That's just my uneducated assumption. Do you suppose I could use them for these flushes. I think you said you drove 125 mi and then drained the oil for the next test. I wouldn't feel so bad wasting these misc. oils. BTW...they are not synthetics. But when the testing/flushing is all over I figure to go back to the synthetic blend.

@OwenLucas 8 ай бұрын

Those would be the perfect oils for a flush! It won’t matter if they are not synthetic either for 125 miles.

@crabapple6775 8 ай бұрын

@@OwenLucas That's great, good to know. thanks. Usually when I change my oil, I pour in maybe a half qt after draining it. I do that hoping to catch and wash away some settled sludge. Then after leaving it to drain for a while more, I plug it and fill properly. Do you think that did any good at all ?