Another fantastic installation from you two. Top works, l should think the owner of the house was well pleased. As for the cricket pitch job, beautiful boiler room on completion and the workmanship is unbelievable.

Excellent video great teamwork, always like seeing Marcus and Glenn involved, good luck in the marathon Pete 👍

Nice job guys, thanks for sharing.

Go hard on the marathon Pete! Supporting ya from New Zealand 👍🏼

You lads do really fine work, regardless of the circumstances. Good on you.

Ты крут мужик 😉 мне очень нравится смотреть на твою работу. Прекрасно когда работа приносит удовольствие 😎

Spot on video as usual pb, good luck on your run bro 🙌🏻

Nice and clean work!

Very nice work, lucky customer.

I've had the olive puller removal tool for about 6 years now I love the puller.

I agree with your premise about the aesthetic positioning of the radiators/pipes in relation to the window.....looks better.

22:06 absolutely brilliant installers quality work

I like that tap change ratchet kit .very handy

Cracking video PB, loving the useful tool tips, they really help. ACS for me in a couple of weeks

Nice one Pete keep it up, thanks 👍

nice job,i love flush rads too,wait for the rusty water to come out ,reverse flush ,get bit more,good idear on join to fittings together,copper olives ,back to back ,is a funny trade,never know what you are going to see,and uncover ,then got fix it ,with whats on the van ,good luck with your marathon ,reminds me of when i was in the army ,on selection ,got run with kit on ,to a certan time,pti push us hard,bless them,they loved there job too,did get jelly legs after a while ,but kept going ,have fun and enjoy the run ,good luck

Great video. All the best for Istanbul I know you will smash it. Then I can get back to my weekly fill of P.B Plumber video with a nice cup of Yorkshire tea lol. When it comes out. Remember we’re all behind you. Well not literally lol 👍👍

Great video mate as usual , 👍

Excellent!

That olive puller looks like a good idea.

Hi,enjoy your videos very much,even though I'm not a plumber,I have done a lot of plumbing on my own properties and my kids, I Bought one of those monument Olive pullers about 3 years ago,great bit of kit got fed of trying to cut them with a junior hacksaw blade so I got one,the only difference is my puller can't be used with a drill.

Another great video 👍

For the olive puller to use it on internal olive fittings get a 1/2 inch brass coupling . This should do what you did with the 22mm adaptor

I’ve used my monument puller for several years, lost the 22mm bit down a void 🙄 & only other lesson was using the 15mm on a shower valve pipe & the olive was so tight & pipe thin it twisted the pipe so had to open up the wall in hallway & repipe it!! Lesson, use old nut sometimes. 😬😁

Everyones talking about the olive puller (which i agree is good) but i'm more taken by that waste pipe upto the filter on the two Veissmanns, a great feature for servicing! :)

Great video especially liked the commercial side that Glen does. Would love to work with him for the knowledge. ( he's got bag's of it ) That job with Marcus looked a nightmare at the start but turned out well. Nice one Pete and the gang 👌

Had my olive puller for a couple of years now, I find it really handy for doing a house full of trv’s as it looks better changing the nuts rather than leaving the old painted one in place. Although I’ve personally never used an impact on it, I’ve only ever used the manual handle. Far to easy to spin a pipe lose from an old elbow and cause a leak. Just my personal preference 👍🏼

Top draw as always guys

im assuming the lagging was tested? wouldnt touch that with a barge pole

That olive puller i bought that im screwfix and most of the times doesn't work sometimes thread is different (fine thread) so u can't screw nut and few times with screw gun i twisted whole pipe. Pipe looked like ice-cream

Excellent work and fascinating video. Don't those seemingly narrow flexible tap pipes restrict the water flow somewhat - especially the hot water. The tap seem high and splashy when turned on.

Great content as always. Could i ask a quick question on replacing the ICOS boiler? I have a new build 2010, nothing but problems with the Idea boiler and also starting to think about getting it swapped out. We have a pressurised system with expansion vessel and large water cylinder. What would you recommend as a replacement? its a 2 storey 6 bed house with over 20 rads. appreciate any ideas before i go asking for quotes.

Hey Pete can you please explain what the purpose of the low loss header is. What is being hydraulically separated?

i had a banging vavlve befor i had to replace the hold thing and it fixed the probelm

lovely job glen, what's that plastic fitting you've found for the mikrofill tundish? thanks

What is the aerosols that Marcus holding at the last minute? Saw this at the previous video as well

I've had an Oliver puller for well over 10 years graet on pricework when doing fancoil units

Do you guys prefer the thorough flush to the magna cleanse?

Do you think that pipe lagging was tested with them old boilers

AIB - Asbestos insulation board. Usually contains the worst kind

great video as always , the code on unilite does not seem to work

Where can you buy a thorough flush

Great Job. Curiously to know how to deal with the gas pipe put in the wall without protection when you encountered. leave it without code or rectify? Does gas safe engineer will responsible if he leaves it and something happened? thanks

Where does water drip from onto Ideal control panel electrical connection? you cut out beginning of sentence. Thanks

Nice work, just tell Glen that braided cable should not be used for that purpose as not recognised by the regs.

Any reason you stopped doing any more work for them as our company has been asked to do some bits for them ?

What brand is the tap back nut ratchet tool please? That would be so handy to have in tight spots.

Jeez what’s that thing at the beginning :.. I want one

Surely the 15mm drain off just above the meter is not usable in that position.

How come your not as active on social media now pb you used to be the man on there

Hey guys where did you get the spirotech flushing adapter?

As a domestic plumbing g and heating engineer I find this more commercial content really interesting, would love to get involved in more of this work.

🤘😎🤘

👍

Are you based in Leicester?

Glens job at the cricket club , was it SY flex he used to extend the wiring ? SY flex has no BS standard so can't be used for fixed wiring.

How did glen fix the light :D

Which Viessman is that? I don't think I've seen those

Was it an olive puller

What watch u got pb??

Code doesn’t work

Still are but just used to more active it’s like you give a shit what people say don’t listen to any small minded jealous people mate

How are u able and aloud to do the wiring? i thought plumbers stay clear of the wiring as its not there job and are not insured to do so.

My olive puller broke, poor quality

Had a few maté’s interested in buying velocity tool bags, none available so sorry , you’ve lost out on several sales!, everyone’s buying veto’s instead!

What was that the start please

Can we stop seeing all this commercial bull please, you’re early videos were so much more valuable

I thought original pcb was black on those wanky icos & isars