Thank you for making this video. You saved the Day! It's hard to believe that a little grease and exercising the forward and reverse pedals would prevent my tractor from starting. After checking battery voltage and the fuses I turned to youtube. Thanks again!

Great! I had that problem with the tractor not starting and thought it was the switch. Now, if it happens again I will move the peddle. Thank you, Ralph

I`m probably a rare one here, because i go by the book on everything i own. Could be why i don`t have nearly the issues others have i guess. I even buy the shop manuals. Still an excellent video regardless Lucas.

I’ll be greasing that fitting tomorrow for sure 👍🏻😉🤣, thanks for sharing Lucas 👍🏻🙂🙋🏼‍♂️

Wow, just wow!!' Watched your video as I had the same problem even though I have greased the fitting. re-greased and problem solved. Well done, back in business

Thanks so much for the view. I just bought my tractor a few days ago so all this information is very helpful to a new BX owner

I never knew that fitting was there. Thanks for the advice. You saved me a service call at my Kubota dealer

Good video, that can easily be missed. If I didn't do research I would have missed it as well.

Just did my 400 hr maintenance a few days ago. Did not know about that fitting. If all else fails, read directions, or watch your videos. Thanks

Good point! This one may need the special Lear Jet grease tube. It gets used every time the tractor fires up.

Have the bx1850 which is about 14 years old. They had problems with that not returning to center position for a while. I greased and adjusted many times before i was happy with it. Great videos.

My tractor stalled and this tip fixed it. Same senario as you described. Thanks for the great advice.

my dealer told me the BX has 1 grease fitting. and that was it. the tractor has no other grease fittings. Now the attachments and implements have a crap ton. nice video

Good tip, Lucas. Our L Series creeps but it doesn't have a grease fitting on the treadle. I've bent that HST damper before....they are $100!! Oh, and WalMart has literally been out of grease for months.

Have a 2650 and the same thing happened.....I never greased the one fitting for the pedal....thank-you. I watched videos where guys spent 2 days checking the fuses circuitry dilithium crystals and Flux capacitor and it was the pedal every time...lol

Thanks, this is one them zerts uou easily don't know about or forget about

Thanks for the video and SUPER thanks for the tip on the tractor not starting due to the position of the treadle pedal needing grease!! I definitely have this issue and it has aggravated the hell out of me. Thanks again!!!

Great tip, well timed as I am about to do my 1st 10 hour grease on my loader. Love the channel and keep up the great work, i really appreciate it.

Good to know, had no idea that one was there!

What a place for a grease fittings. Thanks.

Thank you. Really appreciate you taking the time and putting in the thought and effort to put these lessons together. Be well

I knew about that fitting, but I am like you. i dont do every thing exactly.

I constantly forget to grease that point. I think I've greased it exactly once in the (almost) 150 hours I've got on my BX. I always grease everything else then go about my business only to realize a few minutes later that I forgot to get that one. "No problem, I'll catch it next time. One missed greasing isn't going to hurt anything..." Then, yeah -- I forget it the next time and the whole cycle starts again lol

You saved me..got it solved Fast..thanks

I missed that grease fitting the manual. Will get it handled tomorrow. Thanks for the tip. Subbed and liked.

Great tip! Stumbled across your channel and I am glad I did!

Just greased mine. Thanks for the tip !!

Thanks for this video you have solved my problem.

Great points 😃

Thank you helped a ton

Thanks didn't even know it was there.

Thank you!

Thank you so much for this video.😊

Good info. Really like your NA Miata. How long have you had it? I have had my 2001 NB since new and it still looks and drives as new. Cheers, Steve/OHIO

Didn’t know about this sensor will check it

Well I'll be darned I found mine on an older tractor and the zerk fitting was covered up with bed liner, and I've been having issues where I let off and the tractor wants to keep going so now I know how to fix it

That little cooling fan used to be very very expensive to replace - if you use it in rough conditions you might want to get a aftermarket guard.

Pretty sure this is the only zerk fitting on the tractor, obviously not including the FEL or BH. Have you ever done the recommended adjustment for the home position of the pedal?

Thanks never know that greese fitting was there

Great tip! 👍

Good information 👍🏻

wiley,thanks.

That did happen to me .. spray greaese

I will need to check the situation on my treddle pedal for my older b7800 I think it has given me a couple of no starts in the last year.

help my bx2380 seat switch is bad used jumper wire on switch by front of seat didnt work , i have to bounce hard on seat to get it to work , if my weight shifts on seat it stalls, by passed connection to seat switch and same , stalls , is there a fuse i can remove to fix it ?

Shame, shame. Looks like someone hasn't been watching Paul Shorts old maintenance video he put out a few years ago. Lol Also, don't forget to turn the knobs for both mower lift and the one that controls speed of rear pto lift arms. Paulsaid they'll freeze up as well. As a matter of fact, I am going to do my now.

Lucas: well I never knew that. I only have 119 hours on Mr K, so will keep an eye on it. Take care and stay safe.

Hurry people go to 3:25

If you have a BX and you don't know what and how to grease it you need to sell it it now. It is not a lawn mower that you put gas in as needed. It is a machine to be respected and maintained.

I hate reading directions

Thanks for taking the time to create these videos. I actually have been greasing this fitting as part of the schedule, but my neighbor had no idea. I refer him to your channel! Keep up the good work 👍