Just so you know, I found a silver-covered 12' plate at a local thrift store after I brought a small magnet with me to test. It grabbed the magnet very well, and the amount of magnetic material in a given plate will determine its ability to allow you to use anything on the cooktop, including Pyrex, etc. effectively. This was a fantastic demo/review! I immediately noticed your bamboo stove-top covers and went to Amazon and bought a couple for my stove-top. P.S. - Same thrift store I found this NewWave2 for $25! - I tossed the old burner element out of my stove top and this fit right into the hole!

Great review, I have just purchased two of these....not too many reviews around like yours. Thanks.

One of the BEST videos on here, about this great product!!! 😁😁😁

I turned my stove off, too. Got a nice piece of wood, sanded it, painted it and it is a great counter for putting my gadgets on it and great place to store pans. Nice to know someone else did this. I bought the Cusimax to use all my pans on it but I like this PIC for determining temperature. Great video. ShotGunRed cooking show always uses their NuWave. Great demonstration--learned so much. I want one now!

Ive had my nuwave i dont even remember how long now . Love it , rarely use my elec stove .

what really cool channel you have, learned A LOT ! I'm not that much of a "cooker" but seeing what you have tried has given me ideas especially for making meals for one person 👍.. well done & thanks 😁

Great review and thanks for the silicone trick to keep it looking new. Love it.

Thanks for making such a fine video. Your explanations are clear and complete. I give you 5 stars!

Thank you 😊 once again I will definitely be purchasing this product it’s because of your presentation

Best Nuwave induction cook-top review on You tube

Thanks I needed this video. I just got one for 15 bucks! I don't use my stovetop either.

Awesome presentation with all the details needed for a home cook ... thanks

As usual, a big thumbs up on your review. Love the silicone addition...... I just bought a 24" x 72" roll of silicone sheet from QVC for $20. Cut it to size, even has a 1" x 1" grid pattern on it....maybe not circular easy.... but a sharpie will solve that.

I love the way you took your time to show and explain this product your review was outstanding thank you would love to know where you got the mat from

Thanks for sharing and show casing this item.

The rubber mat helps to protect the ceramic top surface of the induction stove from knocks and bumps caused by dropping the metallic containers on the surface.

The disk that let's you use non-magnetic cookware isn't aluminum, as you say it is. Aluminum doesn't work on induction. The disk is either iron or steel.

BTW putting a paper towel under the cookware will preserve the cooktop from spider scratches.

I do the same thing for my two "NuWave PIC 2" units (direct from NuWave in 2013) and the "nuWave PIC Gold" (from HomeDepot.com) I recently got: I built a single-piece wood platform ( a piece of 23/32" -- almost 3/4" thick OSB, but plywood woudl also work), spray-painted it a matte silver (to look more like a "kitchen color" and blend in better), then cut a piece of clear Lexan (a polycarbonate thermoplastic) to fit it (for easy cleaning) and finally the PICs on top of that...I leave them sitting there usually vs. using the platform as counter space/prepping. I probably won't ever be using a standard eclectic stove again...maybe not even a gas one (as good as gas cooking is) since for me, induction works fine: I like its energy-efficiency and not heating up the kitchen unnecessarily, especially in Summer months! -- BR

Hi. Do you know of a source for recipes using this PIC? I am looking for instructions to make boiled white rice. Thanks!

Where can I find a silicone mat like you are using?

Hi, Informative vid but, it would be helpful to see you. And if your going to put a vid like this, Why would you not cook something using the unit?

Where did you get the silicone mats? Do you use the mats while cooking sounds like a dumb question? I have two that I bought years ago one I gave to my wife and the other I gave to my daughter and they were never used so I’m going to start using both of them.

I also heard if you add a strong, small magnet to the bottom of a pot or pan without a magnet should work with the induction stove. Is that true?

You weren't actually Cooking with your magnetic Induction Pans but I wonder how often this 2nd Generation version runs the Air Circulation fan? My Original First NewWave runs the fan Loudly all the time it's on. That's regardless of the temperature setting and there's only one Speed. No Increase for higher settings.

do you still have this cook top and could you put a paper towel on the stove with a pot on top and cook to catch spill over... great video thankyou, also is there a noisy fan to cool it down?

Hola tengo esta parrilla.me gustaría saber si puedo cocinar pasteles

NuWave cooktop can Yeti 3000 Power It Up from Goal Zero

The "Wok" is high carbon steel vs. "cast" iron.

I think you meant a steel hob not aluminum. Your Calphalon is aluminum.

i don't know how to turn it on would you please show me

Hade stove top 4 years , like using it. the fry pan ,don"t like it, every thing sticks to it and hard to clean, under stand lifetime warranted right""!

Deffusser plate

appliance.academy