Polaris Ranger Prop Shaft Removal and U-Joint Replacement

  Рет қаралды 38,960

ATV Repairs and More

ATV Repairs and More

2 жыл бұрын

I see these prop shafts and U joints go out all the time on these machines. In my opinion, they are very under built. If you can hammer out the pin, that might save you some time but I usually just use the method I did to remove the shaft. Some machines may not let you slide the front differential out like I did.

Пікірлер: 16
@rodneybilly7389
@rodneybilly7389 7 ай бұрын
You did a really good job young man makes me proud to see young men that know how to work on these
@atvrepairsandmore2482
@atvrepairsandmore2482 7 ай бұрын
Thank you. For the rear yoke, I would go to Polaris site or call a dealer to get the part. You can put the vin number in on the website to find the part or the dealer can give you the number. Once I have the part number, I usually order on ebay
@rodneybilly7389
@rodneybilly7389 7 ай бұрын
@@atvrepairsandmore2482 I looked on eBay but there was none for the XP model only the Ranger 800 and they won't fit
@rodneybilly7389
@rodneybilly7389 7 ай бұрын
@@atvrepairsandmore2482 would you happen to have the part number for the rear yoke?
@bigdougss5240
@bigdougss5240 5 ай бұрын
Awesome video my 2018 ranger u-joints went out I watched your video and I went ahead and ordered the tool of Amazon it wasn't but $40 but I changed both u-joints just like you did and it took me about 3 hours.
@atvrepairsandmore2482
@atvrepairsandmore2482 5 ай бұрын
Thank you. It’s not to bad but definitely takes some time
@cougarforrest
@cougarforrest Жыл бұрын
Very very helpful. Saved me a ton of time. Thank you for the great video
@clinte9897
@clinte9897 Жыл бұрын
Pretty good video, ty.
@Quinonesr
@Quinonesr 11 ай бұрын
What was the model number of the Ujoint? The wind makes it hard to hear
@rodneybilly7389
@rodneybilly7389 7 ай бұрын
I could not hear it either buddy that wind was cutting a ruckus
@shawnbowman8630
@shawnbowman8630 10 ай бұрын
So all said and done, how long did it take to replace the u joint? I need to do mine and am curious.
@atvrepairsandmore2482
@atvrepairsandmore2482 10 ай бұрын
I would say 2-3 hours.
@rodneybilly7389
@rodneybilly7389 7 ай бұрын
Hey guys where is the cheapest place to find a rear yoke for a 2011 Polaris Ranger 800 XP ho model EFI - eps
@ryanyoung9393
@ryanyoung9393 Жыл бұрын
Where are you finding ujoints ? The dealers in Ontario are telling me they are unserviceable and need to replace complete shaft
@atvrepairsandmore2482
@atvrepairsandmore2482 Жыл бұрын
I usually order them on eBay or you can maybe cross reference it at a auto parts store. The dealer is lying to you. I’ve replaced a few of them on rangers.
Remove and Repair Polaris Ranger Prop Shaft
18:22
Aaron S Rose
Рет қаралды 108 М.
КАРМАНЧИК 2 СЕЗОН 7 СЕРИЯ ФИНАЛ
21:37
Inter Production
Рет қаралды 529 М.
路飞被小孩吓到了#海贼王#路飞
00:41
路飞与唐舞桐
Рет қаралды 62 МЛН
когда повзрослела // EVA mash
00:40
EVA mash
Рет қаралды 4,2 МЛН
20 Tips to Replace U joints Like a Pro from a Professional Mechanic
16:41
briansmobile1
Рет қаралды 1,3 МЛН
How To: ATV/UTV U-Joint Replacement
10:51
Rocky Mountain ATV MC
Рет қаралды 95 М.
Ranger 570 Full Size Prop Shaft R&I
10:42
OldGlory
Рет қаралды 38 М.
Polaris Ranger front bushings and U joint replacement
45:24
Spirit of the Outdoors
Рет қаралды 3,5 М.
Drive shaft velocity
2:40
JCG30200
Рет қаралды 1,8 МЛН
Removing the Front Differential on a 2008 Polaris RZR 800
10:49
striker1211
Рет қаралды 1,5 М.
How to install Polaris Ranger Carrier Bearing | SuperATV
20:45
POLARIS RANGER XP 1000 - Front Diff assembly.
9:14
Truck-Tek
Рет қаралды 4,2 М.
Driveshaft removal Polaris Ranger Crew 2017 XP900
5:41
Turbotom22
Рет қаралды 33 М.
Why your Polaris RZR/General/Ranger has a Jerky Start!!
4:39
Hunterworks Inc.
Рет қаралды 445 М.
Слепой парень помог раскрыть тайну 😱
0:45
Фильмы I Сериалы
Рет қаралды 1,9 МЛН
БАЧОК ПОТИК
0:22
KINO KAIF
Рет қаралды 2,9 МЛН