Polybush - Front suspension bushes - XK8 / XKR (1996

Polybush - Front suspension bushes - XK8 / XKR (1996 - 2005)

Рет қаралды 5,049

2 жыл бұрын

Polybush - Front suspension bushes - XK8 / XKR (1996 - 2005)
I chose Polybush polyurethane bushes to fit to my 2004 XKR. This video shows how easy they are to fit.

Пікірлер: 27

@pelikankowalski5439 2 жыл бұрын

Finally, a decent job !!! Everything is cleaned and painted, it looks good !!! No unnecessary talking and all this in garage conditions !!! COOL !!!

@ccuk 2 жыл бұрын

Thank you for the nice comment. I am glad you appreciated the video. John.

@johncooper7242 2 жыл бұрын

fascinating to watch ...The attention to detail is excellent and this will be a very useful technical resource for other XK8/R owners tackling this work for the first time. That car is going to drive like it was new again ....instead of a shuddering, clonking barge as mine currently is .

@ccuk 2 жыл бұрын

I am glad you enjoyed it. The car is now tight as a drum. I just need the suspension setting up correctly

@throwback19841 6 ай бұрын

10:00 thank goodness for impact wrenches

@ODRModurol 2 жыл бұрын

John, nice looking job all cleaned up and painted. Great stuff, regards Damian

@ccuk 2 жыл бұрын

Thanks Damian. This video has taken an age for me to get out. This was work done in May. I am looking forward to getting to meet some other XK8/R owners this summer now. John.

@UdoIBress 2 жыл бұрын

explained very well, I still have to do this work too. but only in winter. there is the xk8 in the garage. thanks for the video. best regards Udo.

@ccuk 2 жыл бұрын

I am really happy to hear that this might help you.

@Matt-xe5dc 2 жыл бұрын

I'm glad my expert camera work made the final cut :)

@ccuk 2 жыл бұрын

You might have got yourself an unpaid job

@stevenslight2607 2 жыл бұрын

What a great video. Thank you. I have the purple Carbon polly bushes on my xkr . So when it’s time to change then I’ll know how to do it. Thanks again 👍

@ccuk 2 жыл бұрын

Thanks Steven. I am happy you found it useful.

@custommetalco 8 ай бұрын

Mate, if you rotated the lower wishbone 180d in vice you would been pushing down instead of pulling up. Awesome video tho. I am changing mine right now

@johnbeckett2624 2 жыл бұрын

Hi, Thanks for an interesting video, I have all this work to do on my own XKR as I need to drop the front cross beam to do some welding behind, do you shot blast the parts to clean them and what paint do you use? I have used Hammerite in the past with fairly good results. Thanks, John.

@ccuk 2 жыл бұрын

Hi John. Yes I shot blasted everything that fitted into my cabinet. Many people have used hammarite with great success. For this I used Hycote Stoneguard with a primer after a chemical conversion treatment.

@ljones396 2 жыл бұрын

Great job! May I ask, what did you use to paint the wishbones? Ive just bought a soda blaster with the intention of cleaning some parts up on my XKR as I carry out some maintenance. Thanks

@ccuk 2 жыл бұрын

I am not a painter but I used Bilt Hamber Hydrate-80 rust converter, then Self Etch Grey Prime & top coated with Hycote Stoneguard Black. I hope this helps.

@ljones396 2 жыл бұрын

@@ccuk certainly, thanks for the reply.

@tiny19892 2 жыл бұрын

great video, be interesting how you set up the upper wish bone in regards to shimming it up. also word of warning the original torque spec on the original design for the fulcrum bolt is about 120 nm. the design with polybush clamps the actual polyurethane not the steel cylindrical tube bush so you wont be going anywhere near 120nm( not without ruining the bushes . i used a lock nut when i done mine and bought various sized washers to shim up for getting the caster right. be interesting how you resolve this. great video again, thank you.

@ccuk 2 жыл бұрын

Interesting and great comment Todd. Currently I have it shimmed to stock. It clearly needs to be adjusted because I can feel it through the steering. I am not yet sure if I will tackle it or send it to a specialist.

@tiny19892 2 жыл бұрын

@@ccuk thank you for reply, my original shims had rusted away so there was my problem right there. may i ask what your solution was to tightening up the fulcrum bolt, mine started to bind if i went too tight hence i loosened it until the wishbone moved freely and then fitted a locking nut. thanks again

@ccuk 2 жыл бұрын

@@tiny19892 I have tightened it to the correct torque figures. It moved although not very easily. I intend to drive a few hundred miles and review it again when I look at the shims. I am visiting the Jaguar Classic car works next weekend and I hope there will be someone that I can get some advice from.

@tiny19892 2 жыл бұрын

@@ccuk good stuff, be interesting what they come up with. many thanks . p.s I would really appreciate a video on this, there are so many people that struggle with it and if I can solve it so can they. All the best to you .

@ccuk 2 жыл бұрын

@@tiny19892 I will do something. I am so behind on my editing so bare with me. 😀