Preparing And Priming Radiators

Рет қаралды 61,052

7 жыл бұрын

Preparing And Priming Radiators.
Circus Tent - Netherworld Shanty by Kevin MacLeod is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Пікірлер: 49

@justMe-qp8jv Жыл бұрын

Thats just how my old boy showed me many moons ago . Nice job 🤓

@PaintingandDecorating Жыл бұрын

Cheers thank you.

@handsthatrockcrochet 4 жыл бұрын

Thanks. You are so good and thorough . I am so grateful with all your helpful videos. It's also good to have a well made British DIY tutorials.

@PaintingandDecorating 4 жыл бұрын

Thanks.

@nickyscott383 7 жыл бұрын

Great work.

@markcrotty1868 7 жыл бұрын

👍👍👍 very good video thank you

@derekmccabe2790 7 жыл бұрын

Good work brother of the brush ...

@PaintingandDecorating 7 жыл бұрын

Thanks

@hungryhooligans1 6 жыл бұрын

What a pro ! Very informative and reassuring. My Dad was a painter & decorator and I know he would have approved :)

@PaintingandDecorating 6 жыл бұрын

Melek Er Thank you.

@adamlw7181 Жыл бұрын

I watched the video through at least 3 times and I am going to ask a stupid question. Did you thin the Bin Primer by pouring methalated Spirits into it? That wont affect the paints performance in any way? I'm sure i may have seen/heard this before but maybe a long time ago. The reason I ask is becuase I'm using that primer on my walls in the kitchen and I though it was getting a bit thick during painting as i had poured it into a tray. I should copy you here and work from the tin then? I'm using that as the paint had muded (cracking) and I was told by ZInsser to do that after applying peelstop to the wall and using that as a primer then the final coat of paint. SOry for the essay, thast if you even get to this :D

@PaintingandDecorating Жыл бұрын

Yes best too thin as you're using it. Evaporation occurs really fast. Thanks

@Gollammeister Жыл бұрын

What primer for radiator did u use ?

@TheLilianlady 5 жыл бұрын

The paint on my radiators has yellowed so when I paint it the fins at the top look dirty. Surely they should be painted too?

@PaintingandDecorating 5 жыл бұрын

It's all down to time and money. Generally they get left because it's expensive... it's time consuming. Have been asked to paint them... they look better lot of work

@plummetplum 4 жыл бұрын

Knee pads are a life saver 😉

@Gollammeister 5 жыл бұрын

I've started to prep clean rough up surface of radiator got first coat on of radiator paint and I noticed at back of radiator bottom a small patch of rust so I went out and got some Kurust to treat rust just gotta remove the paint around edges of where rust meets edge of old gloss

@PaintingandDecorating Жыл бұрын

B.I.N primer is a good one dries fast... Thanks

@moeenahmed6853 5 жыл бұрын

Hi mate.... Do u have a video on how to clean a radiator between the grills before painting it???

@PaintingandDecorating 5 жыл бұрын

Sorry don't think so. But what I usually do is tie a cloth to some string and on the other end tie something heavy that will fit between the blades. Drop it down and pull your damp cloth through.. takes some time.. but good results. Dust and vacuum first.

@Pandapopify 6 жыл бұрын

Hi, could you use the same products to prime and paint the copper pipes?

@PaintingandDecorating 6 жыл бұрын

Amanda Winfieldale Yes as long as you use B.I.N. primer or a primer that is suitable for copper pipes.

@Pandapopify 6 жыл бұрын

Painting and Decorating thanks so much and for your quick reply! I love your videos and how thorough you are, I’m the same so you’re good for me to learn from :)

@PaintingandDecorating 6 жыл бұрын

Amanda Winfieldale Thank you and Happy Christmas.

@Gollammeister 5 жыл бұрын

Would nail polish remover degrease and hopefully help remove old gloss ? Daft question but I saw it online and figured can't hurt to try

@PaintingandDecorating 5 жыл бұрын

It may work but it's not the best thing to use. Gloves and white spirit to remove grease and paint stripper to remove paint. The thing with nail polish it will work up the paint and spread it about.

@krisholden8490 2 жыл бұрын

Hi, was just wondering why not BIN the copper pipes rather than open the Fortress special metals primer? I've used both BIN and Bradite one can myself for these in the past.

@PaintingandDecorating 2 жыл бұрын

You can get a better finish with using the Fortress it's more white than BIN. BIN is good but can dry too fast and can need a few coats.

@krisholden8490 2 жыл бұрын

@@PaintingandDecorating okay great, thank you

@Blue60 3 жыл бұрын

Hi can I use Dulux satinwood water base or oil base for radiator

@velviaman3206 3 жыл бұрын

I have used oil based Dulux satinwood on radiators since it came on the market. It is recommended on the tin for radiators, have to go to trade outlet to get it now.

@acropolisnow9466 5 жыл бұрын

BIN knocks your block off. Good gear though

@williamtaylor874 7 жыл бұрын

keep em coming can we have more volume i think ime going deaf lol !

@PaintingandDecorating 7 жыл бұрын

Sorry about the volume will sort it out. Thanks. Loads more to come.

@donnagammell 4 жыл бұрын

Thanks for the great videos have watched them all now I think lol am wondering what paint you used as a top coat would a satinwood do ? Have colourtrend satin paint thanks

@PaintingandDecorating 4 жыл бұрын

Thank you, and yes a satinwood will be fine.

@donnagammell 4 жыл бұрын

Painting and Decorating ah her thank you

@hamkor04 4 жыл бұрын

@@PaintingandDecorating it this primer will stop the satinwood from yellowing? or have to use some kind of Radiator Paint. What is the difference with Radiator paints and this method? Many thanks

@PaintingandDecorating 4 жыл бұрын

@@hamkor04 radiator paint is non yellowing and water based.

@andrewbell8135 7 жыл бұрын

Like your channel / question - my brother repainted his radiator and used wood primer and undercoat then over with finish colour gloss - i am curious as to whether it will be ok / last? what is your thought on this seeming wrong use of paint?

@PaintingandDecorating 7 жыл бұрын

not the best but it will be ok as long as the preparation was good.

@andrewbell8135 7 жыл бұрын

Thanks

@unyimeakn9615 5 жыл бұрын

Not very detailed, Skip some key information e.g. how long you left the ZINSSER B-I-N SHELLAC-BASED PRIMER SEALER to dry off for.

@PaintingandDecorating 5 жыл бұрын

45 minutes

@paol505 5 жыл бұрын

what kind of kneepads do you like ? i respect your vid`s m8 !!

@PaintingandDecorating 5 жыл бұрын

Thanks, I prefer light weight sponge ones. Some can go inside your overalls.

@johnnicholson9118 2 жыл бұрын

knee pads in a carpeted private house ? plus you painted that radiator like a apprentice .brother of the brush .your having a laugh .

@deekoh3996 5 жыл бұрын

Don’t fancy the brush boxes much?

@PaintingandDecorating 5 жыл бұрын

Oil brushes I just keep them in water... cleaning and smell no big deal. B.I.N. primer brushes keep in a big wipes container and it saves the environment. Waste nothing when working for yourself only way you will survive.