Surface Cleaner Tips and Maintenance

Рет қаралды 45,773

Күн бұрын

Here are some basic surface cleaner tips that will help keep your Surface Cleaner maintained and operating smoothly. Nothing is more frustrating than down time on a job, especially when cleaning hard surfaces. Preventive Maintenance can save you valuable time as well as having spare parts at all times. If you need a good surface cleaner check out @dougruckerstore at www.dougruckerstore.com/produ... We also carry or can get you parts needed for most surface cleaners.
This channel is committed to helping pressure washing business professionals grow and succeed in their skills and knowledge of the industry. If this video has been helpful, please subscribe using the link below and hit the BELL so you'll get notifications when I post new videos.
/ @pressurecleaningsch
If you are new to the pressure washing industry, you'll want to evaluate SOFT WASH SYSTEMS available on the market today. The KINGSLINGER is definitely one you'll want to consider.
www.dougruckerstore.com/produ...
Here is my KINGSLINGER Soft Wash System KZfaq Playlist!
• Soft Wash Systems (KIN...
I have several playlists but here is the one featuring STORE EQUIPMENT and ACCESSORIES.
• Store Equipment and Ac...
Are you looking to start a pressure washing business? Check out our training and mentoring opportunities at www.pressurecleaningschool.com/
I have an online video school with over 260 training videos that will help you drastically cut your learning curve if you are starting a pressure washing business. www.pressurecleaningschool.co...
Be sure to check out our 2 day MONTHLY Pressure Washing Classes and Training Schedule in Houston that includes job site training as well as classroom instruction. www.pressurecleaningschool.co...
For all your pressure washing equipment and supplies please visit
www.dougruckerstore.com/
Here are many of the tools and supplies that I purchase through AMAZON. These are items use on a regular basis that you may want to consider adding to your existing pressure washing business equipment. In full disclosure I do make a small affiliate commission if you use my links.
www.pressurecleaningschool.co...
For any questions you might have about TRAINING, check out our FAQs page:
www.pressurecleaningschool.co...
For any additional questions you might have, please use the link to the school website below and scroll down to the CONTACT US section!
www.pressurecleaningschool.com/
For any questions you might have about our products from Doug Rucker Store, please use the link below use the CONTACT US form on the store website!
www.dougruckerstore.com/conta...
To stay updated, follow our social media pages!
/ pressurecleaningschool
/ dougruckerstore

Пікірлер: 112

@UnclaimedStorageTreasures 2 жыл бұрын

Awesome video

@c7It Жыл бұрын

Very informative. Ty

@PressureCleaningSch Жыл бұрын

Very welcome

@3bassplayer6 3 жыл бұрын

Dude, love your videos!! I’ve learned a ton. I do have question though: how much and how often should you lubricate through the grease fitting? Thanks so much.

@PressureCleaningSch 3 жыл бұрын

If there is a grease fitting probably about once a month depending on usage. Just don't want to over grease.

@alhydrowash9989 4 жыл бұрын

Love your videos thank you brother!

@PressureCleaningSch 4 жыл бұрын

Thanks Al

@Carnius797 2 жыл бұрын

Please respond to this if you can.I have a 16 inch whisper wash ultra clean. Should I grease it before it’s first use? How often should I, and if there’s no grease point what do you recommend on how to service it? Thank you very much

@randydewey3622 2 жыл бұрын

Hey Doug. Are spray bars universal? I’ve got a 20” BE whirl a way so was wondering if I could buy either a whisper wash bar or GP bar since they are easier to find. Thanks!

@PressureCleaningSch 2 жыл бұрын

Good question. I doubt they are as the swivels are different but I’ll check. We can get the BE bars for you though

@davidfloener7539 2 жыл бұрын

Where do you get those cartridges & replacement Parts?

@floridaprosoftwashllc.3416 2 жыл бұрын

Hi Doug, can you tell me where I can find the rotary swivel or the bearings for it.? I have an 18 inch general pump surface cleaner. Thanks a million

@PressureCleaningSch 2 жыл бұрын

I’d try these folks. spraywell.com/general-pump-dcfscp18gz-hammerhead-surface-cleaner-18-inch/

@brendanhorsman7680 2 жыл бұрын

Hey Doug! I have a 4400 PSI 4.0GPM washer and a 20” Whirl A Way surface cleaner. What tips would you suggest for the surface cleaner? I’ve heard 25025,25030 and 25035, what do you think would work best? I mainly just do concrete.

@PressureCleaningSch 2 жыл бұрын

All of the above depending on the concrete. New, old, how dirty etc all play into it

@dennislea3159 2 жыл бұрын

Doug,great video, so is it best to put ball valves on all my attachments.

@PressureCleaningSch 2 жыл бұрын

No need to do that. One ball valve on your hose is all you need

@dennislea3159 2 жыл бұрын

@@PressureCleaningSch do you have any classes around Ohio

@PressureCleaningSch 2 жыл бұрын

@@dennislea3159 no I don’t. But I have my online school. www.pressurecleaningschool.com/join/

@dennislea3159 2 жыл бұрын

@@PressureCleaningSch I will check k it out

@properpreparation3213 2 жыл бұрын

Thanks for the tips Doug. Question... After a year or so of using the same surface cleaner it recently started wobbling/shaking back and forth rigorously. Any Idea of what could be the cause of this? Thanks

@PressureCleaningSch 2 жыл бұрын

Either clogged tips, bent bar, or swivel gone bad or all 3

@patricknichol4449 3 жыл бұрын

Doug appreciate the content. I just bought 20” be surface cleaner. It came with 25020. I put 25025 in it but it’s seeming like it’s still putting out too much pressure. I have a 5gpm 3k psi machine. Pressure gauge off of 200’ hose says 2650psi. But seems real high and surface cleaner wants to fly. I don’t want to etch any thing. Should I try 25030 tips

@PressureCleaningSch 3 жыл бұрын

Yes try those and and maybe even 25035

@julioctorres6450 9 ай бұрын

Is possible to customize a surface floor adding 2 more nozzles when you have only2 or they are like that from factory only? Thanks for the videos

@PressureCleaningSch 9 ай бұрын

Sure you'd have to have a bar made for 4 nozzles if the manufacture doesn't have one.

@julioctorres6450 9 ай бұрын

@@PressureCleaningSch what would be your recommendation on this? I have one but I don’t feel it have enough power for the type of machine I have, the nozzles are clean and clear.

@TheGrove54 7 ай бұрын

Hi Doug , Mine is leaking out of the underneath middle steam where the little hole is would this just be a o ring ?? Jets are clear and it’s spinning

@PressureCleaningSch 6 ай бұрын

Yes sounds like it could just be an oring

@FateOfAll 4 жыл бұрын

Will having a good filter on the water inlet side prevent clogging or will clogging happen regardless? Thanks a bunch.

@PressureCleaningSch 4 жыл бұрын

It will help, you will have less clogging issues.

@FateOfAll 4 жыл бұрын

@@PressureCleaningSch Thank you! 😃

@diamondwashbysoftwashprosd979 3 жыл бұрын

My WW classic does what yours is doing. It start becoming oval over time. What can we do to prevent this?

@PressureCleaningSch 3 жыл бұрын

are you talking about the brush guard?

@jacobfuchs1955 2 жыл бұрын

I have the a 20in BE Whirlaway that I just got it has a greasable zerk what type of grease should I use. And should I put it in more places then just the zerk?

@PressureCleaningSch 2 жыл бұрын

Way back when I had one with a grease fitting I used a lithium grease I think it was. Just grease the zerk. Probably every 6 months or so friending on use

@jacobfuchs1955 2 жыл бұрын

@@PressureCleaningSch ok thanks and also I’m running a 4gpm 4000 psi will 25025 tips work well? Last question is on sensitive concrete or surfaces do you adjust your pressure or change tip sizes on your surface washer? Thanks.

@PressureCleaningSch 2 жыл бұрын

@@jacobfuchs1955 change tip sizes. I never adjust unloader

@buyteslastonk 3 жыл бұрын

Do we need to use Teflon tape on nozzles? I currently do, but have heard other say its not needed?

@PressureCleaningSch 3 жыл бұрын

Not on the nozzles you don't. I Never have

@buyteslastonk 3 жыл бұрын

@@PressureCleaningSch thanks doug thats gonna save some time too. Much appreciated brother

@adamg.3138 2 жыл бұрын

I unclogged my surface cleaner nozzle, but when I hooked it up to the Pw I still couldn’t get Pressure. Do you know what the issue could be ? The black hose connected to the surface cleaner is stuck in the quick connect. I was using a box store pressure washer and the pump went bad on it while I was surface cleaning. The Pw engine shut down and now the hose is stuck.

@polarlab113 2 жыл бұрын

Release the pressure.connectors won’t let go if pressure is still in the line.just pull the trigger when it’s shut down

@johnthe_don 2 жыл бұрын

Is there some sort of in line pre filter so that jets don’t clog??

@PressureCleaningSch 2 жыл бұрын

Yes sir. www.dougruckerstore.com/products/high-pressure-inlet-filter/

@jonboysprowash7845 2 жыл бұрын

Hey Doug. Which grease do you recommend for a surface cleaner?

@HouseWashingRick Жыл бұрын

I use a marine waterproof grease from Tractor Supply

@jonboysprowash7845 Жыл бұрын

@@HouseWashingRick Thanks 👍

@alexharper9786 Жыл бұрын

I just got a BE 20” with casters do they come pre greased there’s a grease fitting if not what kind of grease?

@PressureCleaningSch Жыл бұрын

Yes they are pre greased

@alexharper9786 Жыл бұрын

@@PressureCleaningSch Awesome what kind of grease do they use ?

@miguelazua7459 3 жыл бұрын

I have this dewalt 18 inch surface cleaner that only one blade is shooting water pressure . Does anyone know how to fix this ?

@PressureCleaningSch 3 жыл бұрын

Check the nozzles. One could be clogged

@genebernal6260 2 жыл бұрын

Best place to buy replacements ? Are these the same as the jrod tips

@PressureCleaningSch 2 жыл бұрын

They are similar to what’s on a jrod but much smaller orfice. Replacements can be bought here www.dougruckerstore.com/products/fan-tip-nozzle/

@mikejohnson9118 Жыл бұрын

What's your take on wheeled vs non-wheeled surface cleaner?

@PressureCleaningSch Жыл бұрын

I don't like any surface cleaner with 4 casters, they seem to have mind of their own. I use to use the Whisper Wash 24 Inch big guy for residential work, I love the 2 wheels in back and 1 in front. Much easier to control. I use a steel eagle now with same type of wheel set up, and love it for our commercial work. So I either use a floater or one with the 3 wheels.

@albertogonzalez1183 3 жыл бұрын

Hey Doug I’ve got a question. I have a 20” hammerhead that I have only used maybe 15 times. One day I noticed my 5 GPM bandit was vibrating real bad only when I used the surface cleaner. I ended up finding a plugged nozzle. I went and picked up two 25025 nozzles from your store the other day and swapped to the new nozzles. I’m still noticing that only when I use the surface cleaner the unloader is bypassing part of the pressure back to my buffer tank. This causes my pressure washer to vibrate abnormally. When I use the wand it doesn’t do it. Only when I use the surface cleaner. Any idea why it might be doing that? Anybody got ideas?

@PressureCleaningSch 3 жыл бұрын

Sounds like you got a clogged nozzle again that can happen sometimes when you change them check them again

@PressureCleaningSch 3 жыл бұрын

Also could be unloader or even a coil pack

@albertogonzalez1183 3 жыл бұрын

Doug Rucker I double checked the nozzles again this morning and they are clean. I removed the unloader and it looks spotless since it’s a new pressure washer. It only happens when I use the surface cleaner. Works great when I use the wand. Zero water comes out of the bypass hose when I I squeeze the wand trigger. But when I use the surface cleaner I get warm water coming out. Took apart the swivel assembly and everything looks fine there too. If I brought my trailer and surface cleaner over to you could you look at it? I need to buy a couple things from your store anyways. Picked up some of your Kings Kling the other day. I’m liking it.

@PressureCleaningSch 3 жыл бұрын

Alberto Gonzalez I’ll be glad to look at it but I’m not a repair guy. If it’s not something obvious I’m not your guy. Lolol. I’ll be around Tuesday. Rest of week I’m out in the field

@albertogonzalez1183 3 жыл бұрын

Doug Rucker Sweet. I’ll swing by Tuesday so you can glance at it. I need to buy a few things anyways.

@ferminaguilar6394 2 жыл бұрын

Sr you saved my wallet a few buks.. my surface cleaner wasn't working properly after l removed the tips for service when l put them back l used an impact and just tighten with out putting attention how the were lined out , causing un even spraying line pattern... almost ran to buy a new one... what an esay fix

@94ucfknights 3 жыл бұрын

where do I buy the whole kit?

@PressureCleaningSch 3 жыл бұрын

Rick Madaus www.dougruckerstore.com/products/replacement-swivel-for-whisper-wash-series-3/

@erikservices 3 жыл бұрын

mine is losing grease from the botton. is it worth fixing

@PressureCleaningSch 3 жыл бұрын

I advent had grazeable one in a long time....sounds like seal may need replaced. Depending on old is you could probably rebuild it. But I am always just a replace it kind of guy.

@hudson.kemnitz 2 жыл бұрын

For the nozzles my surface has the option to use 2 and 4 and wondering why would I use 2 nozzles and why would I want to use 4? I have the ground force surface cleaner

@PressureCleaningSch 2 жыл бұрын

For a 4 or 5 GPM you’d use 2 nozzles. 8gpm you could use 2 or 4 nozzles. Although I wouldn’t use it on a 4. I’d go w a smaller surface cleaner.

@hudson.kemnitz 2 жыл бұрын

@@PressureCleaningSch I have an 8GPM machine. Why would I run 4 tips instead of 2

@PressureCleaningSch 2 жыл бұрын

@@hudson.kemnitz 4 can help cut down on striping and also cleans better.

@jrob2kmusic333 Жыл бұрын

I just bought a surface cleaner and the tips wont come out? I put all my weight on it and even grabbed the 9/16 wrench and they still keep slipping. I want to change to 25025. Any suggestions?

@PressureCleaningSch Жыл бұрын

You could try some penetrating oil and let sit awhile. They really are not usually very hard to get out.

@jrob2kmusic333 Жыл бұрын

@@PressureCleaningSch ill try again. I just probably already stripped it enough but it literally wont budge.

@coreysolomon2818 2 жыл бұрын

Hey what's the model number for that surface cleaner?

@PressureCleaningSch 2 жыл бұрын

www.dougruckerstore.com/products/whisper-wash-19-inch-classic/

@mikesavage8203 4 жыл бұрын

What nozzles do you find works best for 4 nozzles 8 gpm machine

@simplycleanpressurewashing758 4 жыл бұрын

Mike Savage 2502

@PressureCleaningSch 4 жыл бұрын

2502 or 25025 depending on the surface. If its really soft surface then I change from 2502 to 25025

@sylvestercoles4758 4 жыл бұрын

How much are the cartridge?

@PressureCleaningSch 4 жыл бұрын

@@sylvestercoles4758 $145.00

@jeffreybower5959 3 жыл бұрын

how often should i mantenance a surface cleaner!??

@PressureCleaningSch 3 жыл бұрын

Depends on the surface cleaner. We change our tips out every couple weeks or so depending on usage.

@skatpk9196 2 ай бұрын

Can both nozzles clog at the same time? All of a sudden, no water out of either of the two nozzles.

@PressureCleaningSch 2 ай бұрын

Yes they can, but usually nit fully plugged. Sounds more like a swivel issue.

@skatpk9196 2 ай бұрын

@@PressureCleaningSch I fixed the two nozzles. They were both plugged. I suspect that one was previously plugged and that the pressure was higher out of the remaining nozzle. The nozzles were very tight, so I had to use a 1/2" rachet. I almost needed the longer bar to loosen it. I took the center cartridge out, cleaned it and put a new "0" ring on the shaft. That mechanism was fairly clean, though. I removed the wash arm and placed it in a vise to remove the nozzles. It would have been too difficult to hold the floor cleaner steady by myself the wash arm was not difficult to remove. It turned counter clockwise to remove. Also, I use this floor cleaner once a year, so I would not have noticed just one nozzle working. I had to use a smaller welding tip cleaner to start as the proper sized tip cleaner would not budge the hardened material in the nozzle. In the end, I learned something new. I will try it out tomorrow to see how much better it works.

@jasoncleansit 2 жыл бұрын

Hi Doug, how do you grease it?

@PressureCleaningSch 2 жыл бұрын

If your surface cleaner has grease ports then using a grease gun

@dylan_hughes 2 жыл бұрын

@@PressureCleaningSch Is there any particular type of grease you need? I don't know much about grease so if there's a certain brand and type you recommend I'm all ears lol

@PressureCleaningSch 2 жыл бұрын

@@dylan_hughes I used lithium grease. Water resistant

@bryankaczmarek6943 3 жыл бұрын

When do you know when you need new tips ?

@PressureCleaningSch 3 жыл бұрын

I go by usage, as you start using and checking nozzles you kind of get use to what a new spray pattern is and can tell when they start widening

@coachnate5747 2 жыл бұрын

How tight are the tips

@PressureCleaningSch 2 жыл бұрын

Don’t overtighten just snuggle up and make sure the line for the nozzle is parallel with the bar

@eddymaldonado2809 4 жыл бұрын

Can we use wd 40??

@PressureCleaningSch 4 жыл бұрын

What would you want to use WD40 on?

@eddymaldonado2809 4 жыл бұрын

Doug Rucker the surface cleaner

@PWgadgets 3 жыл бұрын

You can't make this stuff up LMAO

@tribulationprepper787 3 жыл бұрын

@@PWgadgets Yeah... Eddy is a HOOT isn't he? Can I turn the surface cleaner upside down to get a drink of water??? Sure Eddy, Go ahead! OK thanks.

@newwavepressure6478 2 жыл бұрын

Do you need to put Teflon tape on them or pipe dope?????

@PressureCleaningSch 2 жыл бұрын

I never do. No need

@frankpirrone6032 3 жыл бұрын

How do you know when your nozzles are worn?

@PressureCleaningSch 3 жыл бұрын

Great question. It's really hard to tell with the eye. Just look for when the cleaning may not be as good when they were new, vibration in deck, having to move slower, etc. We just change ours out every couple weeks or so depending on usage, sooner if doing a lot of commercial concrete.