Further Filtering Fuel In A Ford F250 7.3 Diesel

Further Filtering Fuel In A Ford F250 7.3 Diesel - Project F2Hooptie

Рет қаралды 3,653

8 ай бұрын

Cleanliness is next to Godliness they say. So today we are installing an additional spin-on fuel filter in our Ford F250. I'll show you how I do it and what you need, including product links.
#powerstroke #superduty #diesel
Product Links:
Filter Base: amzn.to/3LXFaiN
Fuel Filter: amzn.to/3RPqIwU
Hose Barb (need 2x): amzn.to/46oMtbr
► Buy Merch Here: project-time-garage.creator-s...
► Follow us on Instagram: / projecttimegarage
► Like us on Facebook: / projecttimegarage
► E-MAIL US: projecttimegarage@outlook.com
► Send us junk here:
Project Time Garage
1113 Murfreesboro Rd
Suite 106
Mailbox #109
Franklin TN 37064
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel so I can continue to provide you with free content each week!

Пікірлер: 66

@rockporttigger7138 8 ай бұрын

PTFE Teflon Tape is not the correct product for fuel line thread. Diesel will eat it and it can get in your fuel. The Yellow Gas version is for NG/LP gas not liquid fuel rated, so don't use that either. Use Permatex which comes in a variety of types for anything that act like a solvent or fuel. Otherwise yes, and I use quick connects on hoses and valves to kill each side of my filters, pumps, X & Y connectors for duel and aux tanks to flip'em out without fuel, or other dumping all over. Good suggestion. $20 filter or $1500 injectors, yea, no brainer.Recommend change them regularly, cut them open and see what's up on every change. . .

@ProjectTimeGarage 7 ай бұрын

Great info. Thanks!!

@JLCmike4014 8 ай бұрын

Guess that’ll be one of the next modifications to do on my ‘99 F-350. That and also a coolant filter system. Just a tip, put some grease on the filter o-ring so it seals better and also makes the filter come off easy the next time you go to change it.

@ProjectTimeGarage 8 ай бұрын

Nice, easy mod. Cheap insurance too!

@richardbarkley9909 8 ай бұрын

Really should completely remove the in-tank screens with the installation of the spin on filter.

@ProjectTimeGarage 8 ай бұрын

Previously done

@silvergrizzly316 8 ай бұрын

Looks good 👍 I'll bring my 2000 F350 7.3l by tomorrow for this mod😄

@ProjectTimeGarage 8 ай бұрын

LOL

@kevinmurphy3464 7 ай бұрын

Clean fuel and clean oil will ensure 500,000 plus miles on that motor.

@ProjectTimeGarage 6 ай бұрын

That's my thinking too.

@jeffreypinder9398 8 ай бұрын

Great addition and instruction...and thank you for relocating the Emer Brake cable above the filter housing.

@ProjectTimeGarage 8 ай бұрын

Yeah, it was bugging me.

@jeffreypinder9398 8 ай бұрын

@@ProjectTimeGarage 😉

@mikepalmer6713 5 ай бұрын

Just finished up this mod on my 99 f250. Thank you for the awesome detailed video. I appreciate all the content you put out.

@ProjectTimeGarage 5 ай бұрын

Cool, glad to h elp!

@azrios 5 ай бұрын

In addition, I installed a tee between the fuel pump and the filter you installed. 1/8 copper line up to a vacuum gauge in the cab to let me know when it’s time to replace the filter.

@ProjectTimeGarage 5 ай бұрын

Ok, now that's good idea!

@shayoneill 3 ай бұрын

i did the same thing, works like a charm.

@egochecker 4 ай бұрын

I just bought a e350 220k miles. I just changed the fuel filter it had 1/2 of junk in the bottom of the res.

@ProjectTimeGarage 4 ай бұрын

Yeah, that's pretty common. This filter will fix that.

@mmcdonald9072 8 ай бұрын

Good idea for my 01 f350 . Gotta love them 7.3's

@ProjectTimeGarage 8 ай бұрын

Right on

@mcleanuniform22 8 ай бұрын

Cheap and efficient. Love it.

@ProjectTimeGarage 8 ай бұрын

Thanks!

@davidlampe4153 8 ай бұрын

Nice video thank you for your work.

@ProjectTimeGarage 8 ай бұрын

Thanks!

@harrypersaud9422 8 ай бұрын

Great video sir

@ProjectTimeGarage 8 ай бұрын

Thanks!

@robertmartin442 8 ай бұрын

awesome video

@ProjectTimeGarage 8 ай бұрын

Thanks for the visit

@johncraig406 8 ай бұрын

My '02 7.3L Excursion has had a Wix24006 prefilter on it for many years, it used to be a Fire Chief's battalion car.... the hoses on it are well into their "old age" obviously, and to the NaySayers that a 10 Micron filter is bad, that filter has lots of Surface Area, it has not been a problem, ever. I will replace it with the Water Drain version next time. We "Discovered" the 24006 fuel filter when we installed the Fuel Sump, and intended to install a Racor Marine glass type fuel filter with drain.... phooey on that, the Wix is already there.

@ProjectTimeGarage 8 ай бұрын

It should be all the filtration we'll ever need.

@todell7008 8 ай бұрын

Great point about larger farm equipment (and commercial trucks) utilizing dual filtration. And the fact that it's biblical? Well, psshh! Who can argue?

@ProjectTimeGarage 8 ай бұрын

Yep, right up there with "Thou shalt not have dirty fuel".

@zupcompany 3 ай бұрын

What are your thoughts on adding a Cat 1R-0750 fuel instead of a water separator. Do you think there would be an issues there or is the WIX 33405 the ideal filter for this application

@ProjectTimeGarage 3 ай бұрын

Should be fine.

@Yukonjackman1 8 ай бұрын

I run a filter on my radiator cooler system also.

@ProjectTimeGarage 8 ай бұрын

Yeah, I think i'm going to do a video on that too.

@jmstew642 7 ай бұрын

What the inside diameter of the hoses used?

@ProjectTimeGarage 6 ай бұрын

3/8" I believe

@pauldampier9681 8 ай бұрын

Honestly that’s just cheap insurance

@ProjectTimeGarage 8 ай бұрын

Yeah, that's my thinking too.

@TheMoparGarage 8 ай бұрын

The more filtration the better! If it wasn’t, FASS, Airdog, etc. systems wouldn’t have 2 filters.

@ProjectTimeGarage 8 ай бұрын

My thinking too!

@indiancreekfarms3011 8 ай бұрын

I want to do that to my 2011 f250 6.7 and my 2002 f350 7.3

@ProjectTimeGarage 8 ай бұрын

Easy modification for sure.

@mrbmd710 8 ай бұрын

Looks good what size bolts did you use to hold the filter base on to the frame?

@ProjectTimeGarage 8 ай бұрын

"bout that big" 😂 Honestly, I dug through the Big Bolt Box and found some mismatched junk from another project. 5/16 and a washer will work fine.

@mrbmd710 8 ай бұрын

Cool thx !@@ProjectTimeGarage

@michaelminer2008 8 ай бұрын

Where did u get the idi shirt at.

@ProjectTimeGarage 8 ай бұрын

They are my own creation.Check my KZfaq store. I have them available.

@mattdarst6485 5 ай бұрын

Did you use 3/8 ID hose?

@ProjectTimeGarage 4 ай бұрын

I think it was.

@deewinn1842 3 ай бұрын

What fuel line hose did you use?

@ProjectTimeGarage 3 ай бұрын

Just some 3/8 fuel hose I had in stock.

@pablorosales6457 5 ай бұрын

How’s it holding up?! Any leaks, or issues due to the inline filter?

@ProjectTimeGarage 5 ай бұрын

No problems. I've done this to all my diesel equipment. My other truck has about 100K miles on it since doing this.

@RaizARukis 5 ай бұрын

How many feet of hose did you use?

@ProjectTimeGarage 5 ай бұрын

Not much, less than 3' I'd guess.

@codybose515 8 ай бұрын

Do you happen to know what size of hose you used? Id rather find it before i have fuel dumping and try to shove the wrong size hose over it😂

@ProjectTimeGarage 8 ай бұрын

Maybe 3/8? I think that's what I used. I have a "big box of hose ends" that I dug it out of.

@codybose515 8 ай бұрын

@@ProjectTimeGarage thanks !

@RaizARukis 5 ай бұрын

3/8" hose*

@user-mf1vj4bb3z 8 ай бұрын

Id use shorter filter

@ProjectTimeGarage 8 ай бұрын

Which filter do you recommend?

@RaizARukis 5 ай бұрын

The bigger the better! LoL more flow, less restriction.