Pt 1 Honda TRX300 Final Drive Rebuild At D Ray's Shop

Рет қаралды 192,433

8 жыл бұрын

Today I'm rebuilding the rear final drive on this TRX300 4X4. Do it yourself and save money! More videos on this repair coming soon....
Thanks for watchin', have a goodun'!
Link to the axle/brake removal,
• Pt.1 Honda TRX300FW Re...
Part number for the pinion retainer nut,
TL1102
I created this video and I own all rights to all content in the video.
Music provided by : Kevin MacLeod incompetech.com/m/c/royalty-free
Name of tune "Slow Burn", and "Big Rock" Kevin MacLeod (incompetech.com) Licensed under Creative Commons "Attribution 3.0" creativecommons.org/licenses/b...
Music provided by : Jason Shaw://audionautix.com
Name of tune "Modern Rock Boy" Jason Shaw (audionautix.com) Licensed under Creative Commons "Attribution 3.0" creativecommons.org/licenses/b...

Пікірлер: 100

@howardswift6968 7 жыл бұрын

So helpful mate , my big red final drive was shot. Now ready for bearing kit. Didn't have the special Honda tool you used so got some box section steel to fit four corners , worked a treat. Big thanks from Wales.

@hankjourdan4010 3 жыл бұрын

Basically my 250sx rear end..helped a ton to see a guy do it before you dive in..thanks

@jimdarcey2934 7 жыл бұрын

Awesome tutorial. Learned more than I thought I would. Keep the lessons coming.

@jeffclaus4422 8 жыл бұрын

So glad your back. Your vids r the best!!! So helpful. Thanks.

@DRaysShop 8 жыл бұрын

+jeff claus Thanks!

@auggiedog5 6 жыл бұрын

Thanks for all the information and parts supply's. The best rebuild videos.

@tommyfalcinelli7040 4 жыл бұрын

Great informative video on the brakes! Just what I needed

@davekelly923 2 жыл бұрын

Thank you, excellent tutorial, especially the purpose tool and part number, cheers from Ireland

@James-mv9qx 6 жыл бұрын

Great video, very good explaining. I'm looking to pickup a used quad and may need to do this, feel much more confident now

@sebastianmalmstrom3547 8 жыл бұрын

Great video D-ray. Glad to see you making videos again.

@DRaysShop 8 жыл бұрын

+Sebastian Malmström Thanks!

@roberthowse6337 8 жыл бұрын

Great Video, You really make it easy for us to follow how you do this stuff, Thanks for the Detail you always seem to make sure to Show us.

@DRaysShop 8 жыл бұрын

+Robert Howse Thanks man!

@2StallGarage 2 жыл бұрын

This video really helped me out, I appreciate it. 👍

@cmanningjr 8 жыл бұрын

Great job! This will help a LOT of people!

@DRaysShop 8 жыл бұрын

+Carl Manning Thanks!

@benitogomez6275 3 жыл бұрын

I enjoy all your videos and really help me, best videos ever seen

@dieselpoop 8 жыл бұрын

excellent video as always d Ray! keep up the good work! I always look forward to ur videos!!!

@DRaysShop 8 жыл бұрын

+Chris Pesta Thanks, I enjoy making 'em!

@acdc374 8 жыл бұрын

+D-Ray Smith Hey do you have a preferred tool brand?

@DRaysShop 8 жыл бұрын

+Wyatt B I have a lot of Snap On and Matco tools.

@hutshillman1596 2 ай бұрын

Awsome bro thank you ray

@SteveRobReviews 8 жыл бұрын

Man that was a nasty looking gear drive , ha must of spent a long time in the swamp. Nice vid buddy...

@DRaysShop 8 жыл бұрын

+Steve Rob Thanks bro! Yeah, it was NASTY!

@cavemitan302 8 жыл бұрын

Great video!

@DRaysShop 8 жыл бұрын

+Alex C. (The Keymaker) Thanks!

@jacksonmiles3532 7 жыл бұрын

this is a great video. wish you would do one for the front diff

@HondaNation03 7 жыл бұрын

Can u do a video on the front differential

@tendertwix1029 8 жыл бұрын

About time u upload a video

@DRaysShop 8 жыл бұрын

+Mitchell Vogel Thanks for watchin' man, I'm tryin'! lol

@tendertwix1029 8 жыл бұрын

+D-Ray Smith I'm just joking man great job

@catchemalive 4 жыл бұрын

Man this is by far the best video period for this job. Thanks a lot. How did you get the metal sleeve off the pinion that the rubber gasket slides into that’s connected to the drive shaft?? Mine won’t come off!

@joeteasley9652 7 жыл бұрын

what about the needle bearing in the case were the pinion sets in

@imnottellinudontwannaknow3188 4 жыл бұрын

Is there a way you could lengthen the front or rear final drive? I want to give mine a higher top speed

@jorgevilmej3977 7 жыл бұрын

thanks for your help and where a can buy the tool for the pinion retainer nut

@bsar9128 8 жыл бұрын

Great video man! I just bought a 300 and ran across your channel last week while looking for this subject. I look forward to the rest of this series! I'm right down the road in Cabot, so now I know there is a knowledgable guy around I can take my bike to also! I do have to ask if you have ever tried the 350d rearend swap on one of these bikes? I am compilations doing it later, since I have a old 350 sitting in the shed.

@DRaysShop 8 жыл бұрын

+b sar Thanks for watchin', never tried swapping from a different model.

@willybean3104 4 жыл бұрын

Does anyone know what the part number is for the coupler that goes on the pinion gear? I am looking for the part but can only find the pinion gear itself.

@MrRbt61 6 жыл бұрын

work the retainer clip around with a pick then hook up end -pull out with pliers

@josephhaddock7577 5 жыл бұрын

I found after trying various methods without success in removing the small pinion bearing that by using a sharp pointed punch fitting loosely in the hole , a couple of sharp strikes results in exploding the race.

@dylanapple9411 5 жыл бұрын

Any helpful hints gor a stuborn one? Ive got it loose but cant seem to get it fully apart?

@abelmorales877 7 жыл бұрын

thanks for your help and where a can buy the tool

@farmboy30117 8 жыл бұрын

Dang D-Ray, I bet you'd wished you had worn gloves on that job! I bet that was a mess to clean up!

@Adayinthelifeof-AG 3 жыл бұрын

Awesome video, I have a Honda Foreman 400 that has a welded axle to the crown gear. I just purchased rear differential bearing and seal kit. Is it still possible or because of the weld did I limit myself on this bearing repair.. I have a leak in my rear diff and want to resolve it.

@quarrena280c7 7 жыл бұрын

D RAY I NEED HELP my honda big red 250es is making a clack noise in the final drive what do i do and what is it?

@josephbroadnax9954 4 жыл бұрын

Hey Ray like your videos does this oem tool work on a 1990 yamaha big bear 350 Thanks Joe

@jeremymatthews5169 2 жыл бұрын

You didn't change the pilot bearing? How do you get it in with that lock ring

@BrandonSmith-qb8vh Жыл бұрын

Is it the same special socket as I need for my 250es

@juanarrue2373 4 жыл бұрын

Hello. Where does the vent hose goes to? to the air filter cabin right?

@themfknightrider420 8 жыл бұрын

are you back at doing videos or are you just doing couple of videos? missed the show

@justinkasinger1913 4 жыл бұрын

Nice vid diy er from Arkansas also

@bradbeem1 8 жыл бұрын

great vid. can you do a vid on installing a warn 424 diff switch?

@DRaysShop 8 жыл бұрын

+b beemer Thanks! If one ever comes by the shop, I will.

@bigheadvlogs6443 8 жыл бұрын

I need a 64mm differential pinion bearing nut socket tool do you have one for sale and how much

@ChristopherBPetrovic 3 жыл бұрын

D-Ray, I'm in trouble with my TRX300FW 4X4! Bought used, rebuilding the rear differential and the case cover has 2 ears broken! Anywhere I could contact to get a replacement? Can you help?

@adamschneider8040 Жыл бұрын

Will a 300 rear end work in a 250? 1986 fourtrax 250

@rcmen2637 8 жыл бұрын

how do you tell if the pinion bearing is going bad

@gabewilson2001 7 жыл бұрын

If I replace the rear bearings do I need to replace them both or just the brake side??? Being that the other bearing last longer since its in grease??

@marcusmoyer7954 2 жыл бұрын

they both get the same wear so why would one not change them together ,,rule of thumb ..

@logantffny1 4 жыл бұрын

Will there always be 2 shim washers? I had a buddy clean mine and I only got one washer back. I think he might’ve lost one in the parts washer and didn’t know

@logantffny1 4 жыл бұрын

This comment is about the front diff in this case

@gerardosoto9154 8 жыл бұрын

what did you use to get all that old fluid out?? ive tried degreaser and it doesnt work. usaully i have to get a ton of rags to clean it. just wondering if there is a easier way to get it all out lol

@LifewithJames 4 жыл бұрын

Gerardo Soto lots of brake cleaner is how I’d do it

@TheCrookHook 8 жыл бұрын

Wow after looking at this video my final drive is in bad shape. I can't remove it from the housing! Yours just came off just like nothing. Also, the drive shaft stayed in the swing arm... Should I be alarmed? lol Thanks for the video!

@joeyseabaugh6742 Жыл бұрын

The driveshaft should stay in the swingarm. The bike he was working on has had the driveshaft separated from the unjoints at some point. It was not reassembled correctly

@rpalmer274 2 жыл бұрын

Is that 2 or 4 wheel drive

@barrymorrison1927 7 жыл бұрын

how much freewheel should I have? mine is hard as heck to turn by hand with wheel off

@joeyseabaugh6742 Жыл бұрын

If you have taken the rear end apart and reassembled it without keeping the ring gear shims in proper orientation “right/left”, there is a good chance the pinion and ring are binding. Those shims look the same but there is a minute difference on thickness from right to left side

@trikelyfe6090 4 жыл бұрын

Same as big red 250?

@nancymounts7095 4 жыл бұрын

You video is to the point ...

@tinkeringwithTimmyyy 8 жыл бұрын

Had my dad build me tool

@zx8401ztv 8 жыл бұрын

Ooow i feel sorry for you mr ray :-(, never nice to work on nastyness like that. The brass rod is a great way for diy'ers :-D, ive used copper/aluminium hammers and wood to apply impact force, the wood is forced into the shape and spreads the impact really nice, no damage :-D Cant beat a bit of wood... well you can beat it but... ooow you know what i mean ha ha :-D

@DRaysShop 8 жыл бұрын

+zx8401ztv Thanks for watchin'!

@bonecollector50 5 жыл бұрын

How can I contact you .... I cannot find the spring clip for the pinion bearing anywhere..... thanks for your help

@joeyseabaugh6742 Жыл бұрын

That spring clip is not necessary. Drive the bearing in and the pinion hold it in place. Honda over engineered that one just a bit

@camdenbaris2937 5 жыл бұрын

Or take a nut that the socket size it 1 7/8 I just did it

@1999tacotrd 8 жыл бұрын

Hi D-ray do u fix these for a living? I got one I cant get the races out and was wondering if I mailed u the diff and the bearings if u can change them out for for me. I sent u a PM on facebook with all the details it might have gone into your (other) folder on there. if u could get back to me on the cost of fixing it and I'm only a few hours from Judsonia

@wesw186 2 жыл бұрын

How much do you charge I’m local?

@mudgrippmike3489 3 жыл бұрын

where is pt 2?

@robertowens536 3 жыл бұрын

Wer could I buy a diff please

@TheTarrMan 8 жыл бұрын

Neet!

@DRaysShop 8 жыл бұрын

+TheTarrMan Thanks Ben!

@juanandresruizlondono4012 Жыл бұрын

Hola

@benitogomez6275 3 жыл бұрын

A question I need. De numbers of each bearings

@benitogomez6275 3 жыл бұрын

Please

@benitogomez6275 3 жыл бұрын

Can you e mail me I have photos

@craigmorrison1398 7 жыл бұрын

Do you have a video on removing the rear axle on a 2005 honda rubicon 500. Also a video on removing the swing arm to replace the bearings

@jacrancam 3 жыл бұрын

Are still doing work, man I need your help

@soggytortilla066 3 жыл бұрын

I can’t get my ring gear out of it

@dennisharrison4744 3 жыл бұрын

I made one lol

@joshwinter9553 5 жыл бұрын

Y would my water pump be ticking

@joeyseabaugh6742 Жыл бұрын

If the water pump on your 300trx is ticking, you are in big trouble. I can guarantee that your engine is totally out of water.

@spacecatboy2962 8 жыл бұрын

dang, wear some gloves man

@DRaysShop 8 жыл бұрын

+TigerShark Nah, I'm not scared of a lil nasty grease, lol!

@spacecatboy2962 8 жыл бұрын

D-Ray Smith unhealthy, bad for ya though

@DRaysShop 8 жыл бұрын

+TigerShark Yeah, that's true. Old habits are hard to break, lol!