Quick Tip - Exhaust Pipes and Clamps

Рет қаралды 11,046

6 жыл бұрын

Don't forget to Like and Subscribe for more! - goo.gl/XtV9CJ
Here's one seemingly minor detail that can go overlooked with Diesel Exhaust Pipes and clamps. Something so simple can really slow down assembly and cause a lot of frustration.

Пікірлер: 23

@massmayhem5067 Жыл бұрын

Great tip on the clamps!!! My mechanics have replaced the gaskets five times and it kept leaking. I go out and check, sure enough they are on backwards!

@SFMARK69 2 ай бұрын

I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!

@hddm3 4 жыл бұрын

Great tip. Something you could easily over look

@madmotorrepair1748 6 жыл бұрын

Thanks for a educational vedio, exhaust leaks causes fault codes, and can lead you in a different direction in diagnosis, if you don't check for good tight exhaust connections!

@TheDieseler 6 жыл бұрын

+Mad Motor Repair That is very true. Glad you liked it!

@CashNYC 6 жыл бұрын

Great video

@unknowtin1621 6 жыл бұрын

Thanks for sharing knowledge

@lokiepokie617 2 жыл бұрын

I was about to swap my bellows for a flex pipe to save money but after your video I’m just gona spend the extra money and get the same part thank you

@harpreetsingh-sd2vb Жыл бұрын

Great tip

@rubberduckyconvoy2723 6 жыл бұрын

THANKX A LOT for education.

@onehunnid7856 2 жыл бұрын

Thank you Sir!!!

@cpt_disco 3 ай бұрын

Sorry if I missed it, but did you say which orientation it should be? I.e does “steeper angle” side sit on muffler side or dowpipe?

@Bosnianfear15 Жыл бұрын

Thank you

@Thomas_Jefferson1 3 жыл бұрын

Thank u!

@CashNYC 6 жыл бұрын

Can u make a video on the isolator bushing on the gear stick on freightliner cascadia?

@SFMARK69 2 ай бұрын

@pedropedro2837 Жыл бұрын

Thanks you are right I made big mistake Thanks

@jeffreylopez8691 Жыл бұрын

Wow I put everything new and still leaking i sure this is my probleproblem, tha k youuu

@nachoojeda3437 5 жыл бұрын

👍

@rclarke2456 2 жыл бұрын

Men you are not lying man it's an headache I'm still trying to figure out why I'm still having leaks when I do Regen on my dd15 It leaks from the turbo pipe to the flex whatever that pip call flange Bell pipe whatever it's called and then the second elbow I think they sold me the wrong clamps I'm not sure what size or how or what.

@samyelalem 11 ай бұрын

I am having the same problem in the same location on my volvo. I have been through 4 clamps and 5 gaskets. It is still leaking. Did you ever fix your problem? And how?

@SFMARK69 2 ай бұрын