R3 DynoJet Autotune and Quick Shifter install and setup video

Рет қаралды 20,827

8 жыл бұрын

→ CHECK OUT our website : www.hardracing.com/15-16%20Bik...
Installing a Dyno Jet Quick Shifter and Autotune on the Yamaha R3.
Greatly increase the mapping and performance of your bike with a Dyno Jet Autotune. Allow Clutchless wide open throttle shifts with a Dyno Jet Quick Shifter. Both products are very easy to install.
→ Subscribe : kzfaq.info...
→ Please take a second to leave a comment before you head off.
→ Facebook: / hardracingllc
→ Twitter: / hardracing_com
→ Instagram: / hardracing
.

Пікірлер: 60

@IIKlaplonGII 8 жыл бұрын

Thank you for making this video. Very helpfull!

@HardRacingPerformanc 8 жыл бұрын

+ Sjenkie “AkrapovicZ1k” Braap Your very welcome ;-)

@devjones 7 жыл бұрын

Good explanation, great video.

@HardRacingPerformanc 7 жыл бұрын

Thanks Dev for the feedback.

@xcabsx 6 жыл бұрын

hey excelent video. i wan to tap the speed sensor also!! do you know where should i tap on the bike? greets

@Macnificent78_ 8 жыл бұрын

if u have step by step instructions on how to install pcv an autotune on a 05 r1 thank would be greatly appreciated thanks

@wongchang8399 8 жыл бұрын

alright thanks bro

@thomasneely7285 7 жыл бұрын

if I were to do a dry nitrous kit on my bike would the auto tune read the extra oxygen and add the extra fuel it needs?

@davidwoo2161 7 жыл бұрын

What exhausts are offered so theres no welding needed?

@federicomarzullo3154 4 жыл бұрын

Awesome! Love your video, man! One question. I'm thinking on installing power commander V and auto tune to my Yamaha R6 2017; how many channels do I need to buy for the auto tune? Is it single or double channel? Thanks a lot in advance. Cheers from Buenos Aires.

@HardRacingPerformanc 4 жыл бұрын

Single chanel AT-200 we’ve got them on our website

@12Raffer 7 жыл бұрын

hi, just one question, what did you do with the O2 stock sensor plug? Thanks.

@HardRacingPerformanc 7 жыл бұрын

We removed it. That is all discussed in our PCV and Autotune Video.

@darkhasdaei7653 6 жыл бұрын

great great video i have a Harley 05 dyna wide glide i wanna put the power commander an auto tune as can i put the speed shift ? thank you

@darkhasdaei7653 6 жыл бұрын

and when i instill these do i need to dyno tune the bike ?

@saleshardracing1561 6 жыл бұрын

Sure. We've got many customers who have that setup.

@kawilifezx10r23 6 жыл бұрын

A quick shifter is better used for track days or drag strips. And if you street race or twisties. On a 300cc daily commuter its not necessary. On a r6 its up to you what you spend your money on.

@saleshardracing1561 6 жыл бұрын

Guess, it's a good thing we live in a world, where people get to choose what they want to spend their own money on.

@mcj28w 6 жыл бұрын

Do you still need to plug in the o2 optimizer if you are installing the power commander and the auto tune?

@HardRacingPerformanc 6 жыл бұрын

Yes, you still need to plug in the optimizer .

@wongchang8399 8 жыл бұрын

so what kind of plug is used for the power commander to plug in the computer?? is it just plug and play

@HardRacingPerformanc 8 жыл бұрын

+Wong Chang Correct. COmpletely PLUG-n-PLAY.

@balajiinder 8 жыл бұрын

can you install a quick shifter with only the PC5 ? do i have to have the iginition module too ?

@HardRacingPerformanc 8 жыл бұрын

+Balaji Inder On the R3, you only need PCV.

@camilomunoz1407 7 жыл бұрын

Como puedo des limitar las rpm de mi yamaha r3 con power comander V?

@HardRacingPerformanc 7 жыл бұрын

@Concordeagle 6 жыл бұрын

For QS, does it matter green wire for #3, blue for #4 or vice versa?

@HardRacingPerformanc 6 жыл бұрын

Colors don't matter. Only that you are in #3 & #4.

@lukelu8522 8 жыл бұрын

what length shift rod should I buy? I have a r3

@HardRacingPerformanc 8 жыл бұрын

+Luke Lu it's all based on bike, and foot controls. No worries, we get all that resolved once you place your order. www.hardracing.com/15-16%20Bikes/15%20R3.htm

@yaumiibratv5482 8 жыл бұрын

Yamaha R3 need pull QS or push QS??

@HardRacingPerformanc 8 жыл бұрын

+Fuad Ade Suadli Zain That depends on many things. Standard Shift of reverse. Stock Foot Controlls or Aftermarket.

@chriswilson1215 6 жыл бұрын

So I have everything installed, pcv and autotune exactly like in the video. When I plug into the computer it does not show green saying that auto tune is running. Also after I rode around for about an hour, and checked the trim, it is still all zeros... but it does show on the live data that it is adjusting the fuel and timing... not sure I'd everything is working correctly. And help is appreciated. Thanks.

@HardRacingPerformanc 6 жыл бұрын

the Green "Autotune" Light will ONLY come on when you are in a quadrant of the graph that is actually getting AUTOTUNE. So normally that would only happen on a DYNO. If your TARGET A/F Map is not filled out, then there will be no trims.

@chriswilson1215 6 жыл бұрын

So does it take a while for it to show trims that need to change? Sorry im new to this.

@chriswilson1215 6 жыл бұрын

And the target a/f do they fill themselves?

@chriswilson1215 6 жыл бұрын

And not to ask a million question, just trying to figure it out.. when I hook up to the computer everything seems to read other than the afr section it just reads 0.00 the whole time

@HardRacingPerformanc 6 жыл бұрын

sounds like you may have not watched the video. Everything is explained in detail in our video above.

@RohitRoy-ti9qn 5 жыл бұрын

What is the price of this

@HardRacingPerformanc 5 жыл бұрын

$229 www.hardracing.com/Autotune.htm

@Doogerauoy 8 жыл бұрын

Couldn't you run the power wire directly to the battery?

@HardRacingPerformanc 8 жыл бұрын

Unfortunately, that's not an option.

@Doogerauoy 8 жыл бұрын

Thanks for the reply. Dynojet said the Auto Tune wouldn't turn off if you connected it directly to the battery. Which caused some people to have drained battery.

@HardRacingPerformanc 8 жыл бұрын

Correct.

@Doogerauoy 8 жыл бұрын

So I've got everything hooked up. Quick shifter works great. But the Auto Tune doesn't seem to work. It has a red light that flashes 3x. This kit didn't come with a CAN termination plug. Do you think that's the problem? Thanks

@HardRacingPerformanc 8 жыл бұрын

Autotune ? or Wide Band 2 ? Is this something you purchased from us ?

@kawilifezx10r23 6 жыл бұрын

Why would anyone waste money buying this for a 300cc bike?aside from a track 300cc this set up is a 1/3 of the cost of buying a 300cc bike.

@saleshardracing1561 6 жыл бұрын

A quick Shifter is only $179. The BIke costs around $5200. Not sure how $179 is 1/3 of $5200 ? :-)

@kawilifezx10r23 6 жыл бұрын

Im sure for a pc5, auto tune, amd quick shifter comes out to be a few hundred dollars. $5,200 on a bike most people dont keep long so any real.investment is pointless. 300cc are usually just daily commuters. Or track purposes i guess would be the only reason to invest in aftermarket parts. To each his own when it comes to bikes. Dont listen to me as long as you enjoy.the bike thats all that matters

@emudshit 6 жыл бұрын

so this will be better to do on a 100+ hp r6? what would be the point in more power on a bike thats creating over 100 horses? wouldn't a commute bike be better for a quick shifter since you will be using it all the time?

@saleshardracing1561 6 жыл бұрын

Considering nearly every modern sport bike now comes with some form of a quick shifter, and 95% of those bike are STREET ONLY......... would indicate, that Quick shifters are enjoyed on Street bikes as well.

@emudshit 6 жыл бұрын

sales @hardracing exactly what I'm saying these people arguing you will get bored blah blah I've been ridding for a while and I rarely prefer a bike high in horses, currently the ninja 400 is my fault and I'm loving it but a quickshifter would only Improve on that

@wongchang8399 8 жыл бұрын

so what kind of plug is used for the power commander to plug in the computer?? is it just plug and play

@HardRacingPerformanc 8 жыл бұрын

+Wong Chang PLug-n-Play, The PCV connects with a computer via USB cable.