REFINA POWER FLOAT 1ST GO ON CEMENT RENDER
Рет қаралды 31,511
4 жыл бұрынOn this one i show you me using the new refina cordless battery powered power float for the first time on this sand and cement render i have not cut out an mistakes made this is a test with me using the tools trying to get familiar with it , the day / weather is not ideal as it is very cold and the render is not setting fast at all.
The wall look good after it was completed. 1st try on refina power float = • REFINA POWER FLOAT 1ST...
unboxing refina power float - • New PLASTERING / RENDE...
HOW TO MIX UNDERCOAT = • How to mix cement rend...
LAYING ON UNDERCOAT - • Cement Rendering under...
HOW TO COAT TOP COAT AND GET IT STRAIGHT = • How to Coat and Straig...
HOW TO FLOAT AND SPONGE FINISH RENDER - • How to Float Finish Sa...
HOW I FINISH MY RENDER SMOOTH SAND AND CEMENT GUIDE AND TIPS DEMO DIY • HOW I FINISH MY RENDER...
our amazon shop = www.amazon.co.uk/shop/macplas...
brick effect render
Dec 2019
• THE MOST BRICK EFFECT ...
Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
The pointsman hawk = amzn.to/2O1nKmp
Refina trowel pack and holder = amzn.to/33PbCvi
microphones used =
USB Microphone MAONO = amzn.to/2MQLJnK
Lavalier = amzn.to/33He7iR
Blue Microphones Snowball Microphone - Black = amzn.to/2P0OINg
camera used = amzn.to/34Nx8AX
All amazon links are affiliated links will cost no extra to buy from but we might get a %
tools links direct
www.refina.co.uk/
How to sand and cement render concrete block wall 1st coat scratch coat DIY
• How to sand and cement...
Find us and like us here
/ macplasterin. .
Tweet us here
/ macplastering
/ macplasteringservices
our amazon store affiliate www.amazon.co.uk/shop/macplas...
@macplastering 2 жыл бұрын
How im getting on with it 2 years om kzfaq.info/get/bejne/ecWle7F13Le6mIk.html power floating a big wall in sunny hot weather #cement #wall #powerfloat
@dioriginalrikog Жыл бұрын
Where can I get this power tool to buy?
@benwilliams9771 4 жыл бұрын
Looks like a good piece of kit. Thanks for sharing your first go with it. Look forward to seeing it under better conditions!
@macplastering 4 жыл бұрын
Cheers Ben mate have a few rendering jobs upcoming it will be used for sure and a wall at home to do witch can be a great test wall :) bring on the sun :)
@marknocton 4 жыл бұрын
Nice to see new techniques. Great video and good luck with it!
@macplastering 4 жыл бұрын
Morning buddy :) for sure mate we need to try new ways in order to find better :) thanks for the support :)
@macplastering 2 ай бұрын
more on this tool only with experience and better weather haha kzfaq.info/sun/PLDpySD0F7BfLBfuQ0HEhBhPWEI5oQineo
@dismaldog 4 жыл бұрын
Look forward to more vids on this-as not convinced ,but as you know i am very old school and stubborn and love the hands on traditions of the trade.I can see benefits for the guys that are doing big walls and all day long.Will watch with interest mate
@macplastering 4 жыл бұрын
Hello bother I hear ya man this is why i show it with me making mistakes as if i can learn after a few walls so can any1 the old ways work and worked good but if we can make it better easier i am all for it why i love to make videos such as this :)
@reddragons5179 4 жыл бұрын
Like the look of the refina float it's be good for reveals.Was looking forward to seeing this cordless float in action all the best with her Mac!
@macplastering 4 жыл бұрын
Hi red dragon mate glad you got to see it in action im looking forward to getting it on again with better weather :) yes that float felt great want to get in broke in a little more
@tapeslayersreviewsreviews9807 4 жыл бұрын
Wow thank you very much for the shout out. 😎🙌🙌🙌
@macplastering 4 жыл бұрын
Anytime mate I gave you a few in other videos before Christmas but for got to let ya know haha , you know your stuff when it comes to metabo and bat drills top advice mate :)
@leemac1980 4 жыл бұрын
Just got one of these, used it for the first time last week. Was scratching up mono with the scratch attachment. Probably should’ve practiced first, It dug in😭 Went straight back in the van. Think I’m gonna practice using Sand/cement for a while, bit more forgiving, ha! Thanks for posting this video👍🏽
@macplastering 4 жыл бұрын
Hey Lee my fellow spreader :) oh man that sounds a pain yea i recon when we get the workings of this tools 2 gables will be an easy finish with speed and less stress, we are all in the same boat , big walls in the summer I reckon this tools will come into its own :) Thanks for watching and commenting mate
@grahamjohnson7934 4 жыл бұрын
great video, well explained. nice job too
@macplastering 4 жыл бұрын
Cheers buddy have a few more to come in the future of this machine :)
@bronach-8071 4 жыл бұрын
Looks cool :)
@macplastering 4 жыл бұрын
Thanks for watching B it is going good so far :)
@emmettloughran7822 4 жыл бұрын
M8 you are getting over the wall in no time but looks like you are saying it's all about hitting the wall right time.. great video J
@macplastering 4 жыл бұрын
For sure it looks like it will be real good on hot days just fly over the whole wall quicker and less stress hoping for some warm days soon LOL Thanks for watching mate :)
@AnnieThyme 4 жыл бұрын
Must save you a lot of time on big projects to have something like this :) the weather sounds miserable for outside work atm. Hoping you have some inside jobs to keep you busy as well until the weather improves a bit. Hope you all are well and having a good weekend Mac :D
@macplastering 4 жыл бұрын
Hi Annie it is real bad atm with this storm glad i was not working this weekend :) have been mostly working inside this was done before Christmas hoping to get it out again for bigger walls with better weather :) Thanks for watching annie and hope your having a great weekend too :)
@rockroll456 4 жыл бұрын
Awesome bud
@macplastering 4 жыл бұрын
Cheers man thanks for the support :) hope your doing well man
@Emmz732 4 жыл бұрын
Wow 😮😮
@macplastering 4 жыл бұрын
Power float to the rescue :)
@markhep 4 жыл бұрын
Looks good Yere I think a bit longer to go off and would finish spot on 👍👍👍
@macplastering 4 жыл бұрын
Hi Mark my Building buddy :) for sure my problems here was its cold and going to get dark soon as it was back in December and hate working with false light on render , thanks for the comment mate :) bring on the Sun
@markhep 4 жыл бұрын
@@macplastering yere carnt wait for summer it really stormy hear today hoping tomorrow it will have gone lol
@break1009eighty 2 ай бұрын
The wall look to wet for it, that is winter for you ,would like to see more on this float
@macplastering 2 ай бұрын
It was so cold and wall was damp for sure haha here the other videos with me using it - kzfaq.info/sun/PLDpySD0F7BfLBfuQ0HEhBhPWEI5oQineo
@ianmcgarty131 4 жыл бұрын
Alright fella been using this Corded version for years. The corded version looks better balanced than your cordless one, though it does get heavy. I only use spunge as it fills and flattens and is not so aggressive. Have to use hand float around edges and beads as it takes it back a bit and leaves bead slightly proud. Just let render tern much quicker and flatter results. You can afford to do this because the meters you cover are huge. Can easily drop pine end of house within 1 hour. I started by putting lime in render but one day didn't and found it easyer as it wasn't so lively and firmed up better. The biggest thing is using proper plastering sand. Hope it helps this machine takes out all the leg work and allows you to focus on the finish.
@macplastering 4 жыл бұрын
Hi Ian mate thanks for the great comment super great info and insight We have great sand here I for sure feel i could went with the sponge straight up , Thanks again with your findings mate
@tapeslayersreviewsreviews9807 4 жыл бұрын
Great video bud
@macplastering 4 жыл бұрын
Thanks mate no smoke and mirrors but the full show 100% on the refina power float 1st try :)
@tapeslayersreviewsreviews9807 4 жыл бұрын
You do a great honest review mate
@joejoey316 4 жыл бұрын
That float looks the dogs boll..! Get the flood lights out mac, I'd say that float would be great for floor screeds cracking stuff👌
@macplastering 4 жыл бұрын
I thnk it will be as well mate need to get a screed job on to test her out good :)
@RA7581 4 жыл бұрын
like :)
@macplastering 4 жыл бұрын
Thanks :)
@bootsmclaughlin1438 4 жыл бұрын
Yes lad looks like a handy tool and i know after a week or 2 you wood have it mastered just looks a bit awkward and heavy and a bit hard to hold...and i think for the money it costs i think ill stick to the good old float for now till i win the lottery again lol.. hope your keepin well and makin loads.....
@macplastering 4 жыл бұрын
its not to bad to hold but yes when i get used to it I will im sure ill be able to rub down big walls fster :)
@macplastering 4 жыл бұрын
Dude you will get that big win again just dont spend it all on beer :):)
@bootsmclaughlin1438 4 жыл бұрын
@@macplastering it wasn't all on beer. Was More hookers and drugs...haaaahaaaaa but will be wise the next time and just spend it on the hookers them drugs are for mugs lad
@macplastering 4 жыл бұрын
@@bootsmclaughlin1438 Oh man you could got me a few trowels before you did all that LOL
@bootsmclaughlin1438 4 жыл бұрын
@@macplastering i wood needed to buy you a bigger van for all the tools you already have lol
@ThePhilandPam 4 жыл бұрын
Now that looks like a bit of a gimmick but it actually works well nice one 👍
@macplastering 4 жыл бұрын
Haha for sure seen guys using the ones with leads but an that would get annoying with ladders and on a scaffold for sure
@macplastering 4 жыл бұрын
Thanks for watching and support mate :)
@markmaker2488 4 жыл бұрын
Great honest video! Just wondering if you tried using the sponge first? I’d like to know if you can skip the float and go straight to the sponge. Cheers
@macplastering 4 жыл бұрын
Hi Mark mate yes I have tried it both ways on this video the error is mine as going to early wall was just to wet and my 1st try I have use it recently with super good results and will upload video in a few weeks for sure :) but yes the sponge on will work great with out floating
@joejoey316 4 жыл бұрын
Get the old news papers out soak up that wall!
@macplastering 4 жыл бұрын
Haha thats what happen for the low end hate using papers most times it tries to slump on me when i do
@anthonykenny1120 4 жыл бұрын
Hi mac,, nice work for the first time using, sponge looks affective. did you finish using power sponge or did you use the hand float to totally finish wall
@macplastering 4 жыл бұрын
The top and middle was 100% the powerfloat but bottom was a mix of both i as it was soaking lol I used a hand sponge to just finish it all up at very end also
@anthonykenny1120 4 жыл бұрын
@@macplastering you'll get sorted when storms. rain. sleet. goes away lol weather is terrible .. Thanks for putting that video up 👍👍
@macplastering 4 жыл бұрын
Had some time the other day and got some footage of the setup and feel i can talk about it with the footage i have for ceilings :):)
@ingenieriahumana 3 жыл бұрын
Hi. Give the ubicación to buy that power float in New York?? Thanks
@macplastering 3 жыл бұрын
Hi mate nt sure they sell in the us yet but this is the site its from - www.refina.co.uk/
@toddmiller1933 3 жыл бұрын
Have u used the plastic hand float much more ?? I have one not got it out for a play yet just wondered how you rate it
@macplastering 3 жыл бұрын
Hi mate I do like it but tend to use the more broken in ones i have I need to get some pins in it so can devil float inside walls and get it real nice for finishing smooth render , seems the kinda float would last years
@toddmiller1933 3 жыл бұрын
@@macplastering yeah I’m the same my worn in ones are so good it’s hard to use a nee one knowing a good one in the van will run it so much better 😂 I’ll have to try break it in on some hidden areas
@macplastering 3 жыл бұрын
You will probs notice on my videos I use new floats for devil floating and screeding the most haha
@Ireland-bc2gx 4 жыл бұрын
Murphy's law mucker,it rained after the wall is rubbed up
@macplastering 4 жыл бұрын
Was hard to get this wall in cold and damp dark day then as a bout to head it starts to rain and of course the weather forecast say no rain LOL hoping to get this machine in use for a better test :) did some rendering the other day but didnt use it as stuff was kinda setting slow and nice just with float
@joejoey316 4 жыл бұрын
Did you put abit of lime in your mix,!?
@macplastering 4 жыл бұрын
I wish i had have as it was a slow set for me was 1st wall and think my scratch coat was to good over that dreaded high suction red brick LOL
@stevencondliffe9340 Жыл бұрын
Using it early . Render isn't dry enough.
@macplastering Жыл бұрын
kzfaq.info/get/bejne/ecWle7F13Le6mIk.html the new video using it mate
@uvelwray961 2 жыл бұрын
What is name of the store the our website did you buy the power float I can't find it on eBay or Amazon
@macplastering 2 жыл бұрын
Try refina they sell these
@stephenmarkey2277 4 жыл бұрын
Is that the hard plastic attachment on the power float
@macplastering 4 жыл бұрын
There is a plastic float attachment and a sponge float one if you get time I have the unboxing showing them up close but will do a follow up video in future with t up close looking at its attachments and fetchers , thnks for watching mate
@macplastering 4 жыл бұрын
@Richie Hughes im looking forward to getting it used this summer :)
@jmorgan7133 4 жыл бұрын
What does that wall look like when it has it's five minutes of fame a day with that certain angle of the sun hitting it. This doesn't appeal to me for floating but I'd imagine for sponging down it be great and as someone's mention in comments the sponge pulls it tight and I'd imagine not so much of a marking off it. Even though I'd imagine it will will burn the burner by polishing them bigger grains in the sand. Good video. Saves me ever considering an option of getting one. Maybe a good send on gables, got one at the moment 6 flights high. May see if Refina would be happy for me to test one for nothing.
@macplastering 4 жыл бұрын
They might you never know , it looks ok here all day round as these back yards get little sun LOL and this wall was a bad shape to be honest , I was hoping to get it on a better wall in warmer weather with sun shining and relay test it out yes some guys just use the sponge and not the plastic and use it to rub they say when the sponge fills its great closing in, have you seen the new trowel I just Unboxed mate ?
@jmorgan7133 4 жыл бұрын
@@macplastering not seen it yet no. Will check it out Mac
@macplastering 4 жыл бұрын
Thanks buddy :)
@meatkillzone9422 4 жыл бұрын
is it worth the money?
@macplastering 4 жыл бұрын
Time will tell for me , but i would say if you could use it good and have a full site on with lots of rendering of loads of rendering in general i recon it could pay for itself ,it can also scrap k rend and polish marble plaster
@elkatron4410 4 жыл бұрын
Still getting use to mine 🤣
@macplastering 4 жыл бұрын
Glad to hear im not alone :) the guys that uses these swear by them :) cant wait to make more video of me learning with it and getting better :) glad you stopped in my fellow spread :)
@elkatron4410 4 жыл бұрын
mac plastering I think we are just stuck in our ways of doing things. It’s like learning it all over again 🤣 it’s nice on the arms until it starts to feel heavy😂😀 glad I popped by it’s nice to see what my brothers get up to 🤟
@macplastering 4 жыл бұрын
@@elkatron4410 For sure Love watching all the diffrent ways guys get it done :) Just glad I was not out in the snow we had today wow hope you have a nice warm inside one on mate :)
@M5.CONTE_DRACULA 2 жыл бұрын
Where I can buy one mate. Really need it
@macplastering 2 жыл бұрын
Refina sell the, from there web site mate ,Thanks for watching and let me know if you need further help mate
@M5.CONTE_DRACULA 2 жыл бұрын
Out of stock for a while
@macplastering 2 жыл бұрын
they do them with a lead also mate but would not be as nice to use round scaffolding
@CheckFred 4 жыл бұрын
Hey Mac ...... You know what happened to the Kid that had too many Toys to play with don't you?? :-)
@macplastering 4 жыл бұрын
He or she would never get bored? :) we must use to best tools to get the best job i do love testing them :)
@CheckFred 4 жыл бұрын
@@macplastering Quite right Mac .... I'm only jealous we never had them way-back-when :-)
@macplastering 4 жыл бұрын
@@CheckFred oh man if you guys had these tools back then there would be no plastering left for us to do , guys back then knew how to work smart and not afraid to work hard either :)
@fixit3108 4 жыл бұрын
how much are they
@macplastering 4 жыл бұрын
Not the cheapest tool but if you got a lot of rendering on im sure it could pay for itself have a look = www.refina.co.uk/prep-floor-equipment/power-sponge-render-scraper/cordless-power-sponge-float.html
@fixit3108 4 жыл бұрын
@@macplastering fek that. too dear.
@macplastering 4 жыл бұрын
@@fixit3108 they got ones with a wire but to e this is better as you wont have all the hassle of keeping safe and the annoying of it getting tangled on ladders and scaffold but yes money is the key to everything mate Thanks for the support on here man
mac plastering
Рет қаралды 18 М.
Plastering For Beginners
Рет қаралды 155 М.
Sergio Outdoors
Рет қаралды 66 МЛН
Plastering For Beginners
Рет қаралды 29 М.
Plastering For Beginners
Рет қаралды 35 М.
Sergio Outdoors
Рет қаралды 66 МЛН