RSV4 | Carbon Frame & Swingarm Covers - Extreme Components

RSV4 | Carbon Frame & Swingarm Covers - Extreme Components | Install

Рет қаралды 6,242

9 ай бұрын

How to install carbon frame and swingarm covers on an Aprilia RSV4 1100, by Extreme Components.
Carbon Frame & Swingarm Covers - Extreme Components: www.extreme-components.com/en/
How to remove the fairings on the Aprilia RSV4 1100: • RSV4 | Exhaust Servo M...
Like & Subscribe for more videos

Пікірлер: 64

@robbe37 9 ай бұрын

dude that looks insane, good taste!

@ALFAVITAGA 9 ай бұрын

Thank you!! ✌️

@gixxis3264 9 ай бұрын

Perfect , I love the ultradark version if the new shape & with a Matte Carbon cover to contrast with the Gloss & Satin finishes i'd love to see it , but this! This is awesome , I'd probably get the RR from the new range (Aprilias are temperamental let alone adding electronic suspension) , really feeling this , very nice

@ALFAVITAGA 9 ай бұрын

Thanks! ✌️

@GetItDone-Right Ай бұрын

She's a Beauty!!! Nicely done.

@ALFAVITAGA 28 күн бұрын

@@GetItDone-Right Thank you! ✌️

@ianjoe9909 9 ай бұрын

Súper tus videos bro, eres el mejor explicando, saludos 🖖

@ALFAVITAGA 9 ай бұрын

Thank you, I really appreciate that ✌️

@hrvgim 9 ай бұрын

You have the best channel bro

@ALFAVITAGA 9 ай бұрын

I really appreciate that! ✌️

@hrvgim 9 ай бұрын

@@ALFAVITAGA keep it up man!

@DeepSouthMoto 9 ай бұрын

Man you make amazing videos on Aprilia mods and maintenance. Nice looking bike!

@ALFAVITAGA 9 ай бұрын

Thank you I appreciate that! ✌️

@anas_moto 4 ай бұрын

Looks amazing 👍

@ALFAVITAGA 4 ай бұрын

Thank you!! ✌️

@demmyk 9 ай бұрын

👏🏼👏🏼👏🏼🔥🔥🔥 Nice bike!

@ALFAVITAGA 9 ай бұрын

Thank you! ✌️

@BMK500 3 күн бұрын

Idk about this mods, just something about that having that shiny frame really does it for me

@ALFAVITAGA 23 сағат бұрын

@@BMK500 It’s preference. Both look great 👌

@superbikesquadracer 9 ай бұрын

Looks amazing i Matte carbon fiber. The brushed aluminium dosent look as good. Cannot wait for more upgrades!

@ALFAVITAGA 9 ай бұрын

I agree! More mods coming up ✌️

@JustFrankMan 9 ай бұрын

Man the bike with those covers is sexy af! Love your videos, always the best and so informative!

@ALFAVITAGA 9 ай бұрын

Thank you I appreciate that! I can’t wait to install the next series of mods ✌️

@schalk4033 9 ай бұрын

Man you're bike look nice... :)

@ALFAVITAGA 9 ай бұрын

Thank you! It’s coming along ✌️

@frankfeng6199 8 ай бұрын

when I installed frame sliders on that bolt with the bracket, the instructions say to put a jack underneath the engine to keep it aligned, worked out for me (in case anyone wants to remove that bolt instead of bending the bracket).

@ALFAVITAGA 8 ай бұрын

Thanks for commenting this. Thats exactly why I didn’t remove it as I know that to remove any engine bolt mount you almost always need a jack. Good to confirm it. ✌️

@frankfeng6199 8 ай бұрын

@@ALFAVITAGA i'm glad to be able to confirm it. It's funny you say that, because my RSV4 is the only bike where the instructions call for you to jack the bottom of the engine. Even for my Tuono and myriad of other bikes, I never needed to.

@ALFAVITAGA 8 ай бұрын

@@frankfeng6199 Anything engine related I would always have a jack in hand just in case. Even if the instructions don’t say so. I know a person that removed the bolt on the RS660 and the engine dropped a bit and was misaligned. So better safe than sorry ✌️

@frankfeng6199 8 ай бұрын

@@ALFAVITAGA you're absolutely right, that would have been the safe thing to do lol, my lazy as just likes cutting corners and sometimes it bites me in the ass

@ALFAVITAGA 8 ай бұрын

@frankfeng6199 We’re all guilty of that 👌

@kforeal6809 8 ай бұрын

Will the triple clamp and clip ons from your 660 fit the RSV4? That would be very convenient.

@ALFAVITAGA 8 ай бұрын

The Bonamici clip ons from the RS660 fit. I got an identical set for my RSV4. But the triple clamp wont work because the RSV4 uses an ignition mount on the triple and the RS660 does not. Unless you don’t use the ignition on the RSV4 and you do a race setup. But even then I can’t confirm that the fork distances are equal to the RS660.

@kforeal6809 8 ай бұрын

@@ALFAVITAGA yeah that makes sense. I forgot about different ignition setup. At least the clip -ons can be swapped over!

@ALFAVITAGA 8 ай бұрын

@@kforeal6809 Yup!

@neytey 9 ай бұрын

Will the glue of the double sided tape not lose its strength when riding because of the heat generated by the engine?

@ALFAVITAGA 9 ай бұрын

My guess is it will be just fine. But if it’s not, I’ll update. ✌️

@neytey 9 ай бұрын

Perfect, how much did the parts cost in total?

@shapelessdreams 4 ай бұрын

where did you get that sticker for the bellypan? it makes the rr look so much better! aswell as the black letter "A". if you could provide me the codes or som for it. much apreciated!

@ALFAVITAGA 4 ай бұрын

It makes a huge difference! These are the part numbers: 2H004187 (RH external wing decal “a” black) 2H004188 (LH external wing decal “a” black) 2H004191 (RH lower fairing decal “aprilia racing”) 2H004192 (LH lower fairing decal “aprilia racing”)

@shapelessdreams 3 ай бұрын

@@ALFAVITAGA I recieved these just today! thanks for the help thus far brother! I was wondering how did you apply the stickers to your fairings? Im not familiar with applying stickers so maybe you have some tips on how you did it?

@ALFAVITAGA 3 ай бұрын

@@shapelessdreams I wish I did a video showing how to apply the stickers because it’s impossible to explain over a comment. Unfortunately it’s very easy to mess them up. Part of the reason I didn’t make a video was because I wanted to concentrate on actually applying them right instead of trying to show how to do it. And even then I almost messed up the “a”. The only thing I can say over a comment is that you need painters tape and you have to use painters tape to keep the sticker aligned. Then you have to lift half the sticker, remove half the peel, and adhere half the sticker. Then you remove the painters tape and lift the other half of the sticker, remove the other half of the peel and slowly adhere the rest of it down. You will also have to use a heat gun or a hair dryer before you apply it. The “a” are the most difficult. Take all the time you need and good luck mate! ✌️

@shapelessdreams 3 ай бұрын

@@ALFAVITAGA what do you need the heatgun for?

@ALFAVITAGA 3 ай бұрын

@@shapelessdreams The heat softens the decal and makes it easier to apply, adheres better as the residue warms up and helps eliminate air bubbles.

@mahanghorbani523 9 ай бұрын

One of the best estethic mod on Aprilia's bike. I'm just concerned if the heat would not completely melt the double sided tape. And I am able to wrap the carbon cover to have the color i want ?

@ALFAVITAGA 9 ай бұрын

True! The silver raw frame is not a popular liking. I’m sure the heat will not affect the double sided tape. The 2023 RSV4 Factory has the Aprilia decal on the frame and the heat does not affect it at all. And the adhesive of the double sided tape is much stronger than the decal. You would also be able yo wrap the carbon cover and not have any issues with the heat for the same reasons as above. ✌️

@mahanghorbani523 9 ай бұрын

@@ALFAVITAGA that's a valid point. Didn't consider the aprilia sticker on the side. I might start to wrap my side frame then.

@ALFAVITAGA 9 ай бұрын

@@mahanghorbani523 good alternative to carbon ✌️

@rl_31123 7 ай бұрын

I wonder if the frame could have just been wrapped in matte black or carbon wrap too?@@ALFAVITAGA

@robertbryant1845 9 ай бұрын

Do you know if they make these carbon covers for the RS 660

@ALFAVITAGA 9 ай бұрын

At this time they only make them for the RSV4 ✌️

@robertbryant1845 8 ай бұрын

Well thanks for replying, kinda sux as I think these would look awesome on my RS660, guess I will keep checking any hope they do these in the future, peace ✌🏻

@ALFAVITAGA 8 ай бұрын

@@robertbryant1845 A few companies make carbon covers for the 660, like RPM Carbon, AMC Carbon, Motocomposites and Maxicarbon, etc. It’s just that the two top manufacturers like Extreme Components and Ilmberger, don’t make them for the 660 yet.

@Motobikereviews Ай бұрын

Mine doesn’t stop leaking !! What can I do ?

@ALFAVITAGA Ай бұрын

Did you take it to your dealer?

@myaccount6905 7 ай бұрын

Great addition to the looks of the bike. I would however never have used that silicon glue. If you (or maybe a next owner of the bike) ever feel like removing the carbon frame covers the glue probably will have stained the frame permanently…. that’s a pity… 🤷‍♂️

@ALFAVITAGA 7 ай бұрын

Thanks! If it stains it, there are ways to polish it and buff it out. Plus I only used a small amount. I agree that for the entire frame I wouldn’t use silicon. I prefer double side tape. ✌️

@BS-do6oy 6 ай бұрын

No other way for Carbon… never fits 100%

@senor-fa-von-dia 6 ай бұрын

Are the swingarm protectors permanent once fitted ?

@ALFAVITAGA 6 ай бұрын

No, you can remove them any time you want.

@senor-fa-von-dia 6 ай бұрын

How would you do that wouldn't the carbon snap ?

@ALFAVITAGA 6 ай бұрын

@@senor-fa-von-dia It will be very tricky. A lot of heat applied to soften the adhesive and slowly pry it out. I am not looking forward to that day lol.