Thank you sir for answering my question I really appreciate it. God bless you and your wife and thank you so much for your service to this great country.

Thanks for work you put in on these videos please keep them coming

I find many times the camera wrecks things. It just does. Also, my save Mark II loves CCI standard velocity ammunition. When I could buy it cheap I planned ahead and got a good supply since my rifle really performs well with it. Also, the bore cam is an experience. My Savage 110 shoots great but the bore cam shows how terrible the inside looks. Chatter marks, pitting, just terrible looking. Thank you for taking us along on your range trips.

One of my favorite channels on KZfaq. Keep it sir. And thank you.

Great news about Mrs. Big Guy. In him all things are possible.

SEMPER FI BRO!!! I did your challenge with my best friend and father in law. Although our equipment isn’t fancy, we had a blast!!!! Thankyou for the inspiration! Good,clean fun!!

I sent my Ranger back for repairs for feeding and ejecting. Christensen sent back a superstar. It does pretty well with most ammo brands but Lapua center x and biathlon are the real deal. I have 10 rounds of RWS R50 I'm holding for a clear calm day that were given to me. it shoots CCI standard velocity and Federal bulk box pretty well. Aquila fails always! Thanks!

I'm glad I found your channel surfing through KZfaq. I love 12gauge shotguns and bolt action rifles.

The rangers my local gun store got in required bedding and floating, the stock/chassis to action barrel was a pretty poor fit. It improved accuracy significantly. 22RF ammo can have big differences between batch lots, I’d be sure there would be differences between different manufacturers that get boxed under the same label. After cleaning I allow at least 20 rounds to season my barrels.

I really enjoy your videos. You truly do a great job.

Also been experimenting with ec barrel tuner with good ammo. Tunes great.

The defects in the Savage barrel are tooling marks from the rifling process. They probably used worn tooling for your barrel. The tool was not cutting cleanly and was tearing the barrel material as the tool was pulled through the barrel. Also, when I was in college (late 70s) many of the 10 meter shooter on the college team did not clean their barrels for thousands of rounds. They would only clean it if accuracy was being lost. Most only pulled a couple of dry patches though the barrel and clean the chamber after a shooting session.

Love your video's mate. Looked pretty windy...not that that stops you. Glad your wife is feeling better. Much love from Melbourne Australia

Thanks (from way down the same rabbit hole) for posting these "warts'n all" video's, they are what we all learn the most from!! I wonder if the focus on 22's accuracy is too much on "things barrel related". The more I play (and think) I suspect that ignition (the whole firing mechanism thing) and headspace (and I don't think this relates solely to an exact measurement either) are at least if not more important -I've shot quite a few old BSA and Vickers Martinis' with barrels that look like crap .... and the thing that gets the biggest improvement very time - clean the breech block internals and replace the main spring!

I'm starting to use Wipeout Patch out and Accelerator. I've been using Butches Bore shine. On Speedy Gonzales reccomendation. Btw. He is building me or I should say re building my Custom 40 x rimfire Benchrest rifle. New Shilen Ratchet barrel,new Jewel trigger, a new McMillan Edge stock and re fitting my tuner. Will be done after this year's Kelbys Super Shoot.

I see a pretty good breeze in a lot of your videos! I have a TR and it averages 8 5shot groups around .300-.324” with center x

I have the Ranger with a dark stock, the purpose of my Ranger is to be a light weight squirrel hunting rifle. I have one of those little compact 6X Burris target scopes mounted and sighted in with Federal auto match ammo which it groups into a ragged hole at Squirrel hunting ranges. It is everything I hoped it would be. Al

Great video ! You are right about thee bore scope! I wish I could unsee some of the things I've found. Funny thing I learned is the barrel don't have to look good to shoot good. ... That oryx chassis deserves a better barrel. I'll be following the next steps to see what I can learn with your hard earned money :)

Yup I think I’m sticking with what I said before “have it cut and crowned” as long as your able to miss the bad spots by doing so, The video says a lot.

Great video thanks

barrel harmonics is a lot like flipping a spring, take a little more time between shots and allow the barrel to settle down, barrel harmonics do not disappear instantly

Your awesome and I love your videos! Keep videos coming thanks again.

F class shooter speedy Gonzalo’s said not to use bronze brush on cracked barrels say bristles get caught in them. Also he puts lock ease which has graphite in his well used barrels. Just run a swab let it dry because it’s Alcohol Basel’s. I’ve been experimenting with boron nitride to get rid of the first round flyers.

Do you have wind flags that you use? If not some of the "fliers" can be wind switches. I shoot benchrest matches and you would be suprised how much a little wind can move the bullet in 50 yards.

Was thinking of getting a ranger,now not so sure!

Im thinking headspace, Let me explain why. You have three close or touching and more consistently 2 flyers. If it was crown, barrel ect. It would consistently shoot all shots inconsistent. lol You still with me? Im no expert by no means but, ive played with headspace on my Lilja match 22lr barrel enough to see the same results when your .001"-.002" out . For my barrel .040" and .042" both shot really well but it also depends on your chamber depth and how much engraving you want on your projectile. Thanks for the video and hope this helps

A local guy is having good luck with Lapua Midas out of his Ranger. I haven't tried it yet. Waiting on a new scope base.

Wind is really gettin it

I think I just figured it out for you Eli. I used to tell my kids everything you turn that cap around backwards your IQ drops about 50 points lol Love your vids, keep up the good work.

Just put some lead through the Savage and watch it improve.. Best wishes to the missus 👍

Here weeeeeeee gooooooooooooo!

Don’t chop the barrel down to 17”s. Need to send the barrel to Texas for Eley testing or to Phoenix Arizona for Lapula testing to see which ammo is really made for that rifle get the tightest groups.

I think Savages trick for that lousy rifling is to choke the muzzle & that’s why the mediocre MKII does as well as it does. When you cut the barrel and re-crown, the choke (the smaller ID of the barrel) is gone and I think the MKII will group even worse. This will be interesting to see.

Are you using wind flags? I wouldn't shoot without them.

On all my pistol mags and rile I use 2000 grit sand paper to make them smooth

Glad your wife is doing much better maybe she can give you some shooting lessons. LOL. Be blessed my brother catch you on the next video

Well Eli, you tell that BIG RED HEAD, BRING IT! I KNOW, there`s a BIG MARINE waitin at the range to put a whoopin on that boy! Hey brother, so glad the Mrs is doing so much better. You tell her that my wife an i are thinkin of her. Hope to see her back out on the range with you, soon.

Cleaning vrs not cleaning has been a heated debate as long as I recall the smell of burnt powder. Everyone has an opinion about it but I offer only this; Every year we head to southern Oregon to shoot sage rats with an old timer that has been guiding for 30+ years. I asked him his opinion about cleaning rimfire rifles. He said to me, “I don’t know the answer to that age old question but i know this. The most accurate 22LR i have ever had is an old 10/22 that I have never cleaned the bore”. He cleans the mags and the action but leaves the bore seasoned to a degree that it would drive me insane. It shoots. What else do we need i guess.

Not a fair comparison, the savage didn't have a tuner. Great videos though.

I have ranger myself mine shoots lights out

Matters not my friend because that is still great shooting.

My new c a 22 wmr was sent back to the factory 2 days after I received it. Not impressed at all!

Get a ATS tuner to try you will be happy.

Haha, it's always like that. Turn the camera on the the gun chokes! Lol! Has to work on it's confidence!

Have the same Savage have the same problem don't shoot bad Barrel don't by a Savage on a Monday or Friday

The feed lips

kzfaq.info/get/bejne/nrt9rc-ElcrDoas.html here you go!!

I " H A D " A SAVAGE PRECISION LITE BOLT ACTION ..!!!!!! 1" IS THE BEST AT 50 YRD ...!!!! OH.. REMEMBER """"" H A D """"" ...!!!!!!

I think I would let the savage go to a new home

Don’t clean a good shooting gun, you should be pleased with the groups you shot and you should know your ammunition by now that your gun likes.

Lap your your barrel