SC14 Supercharger Installation | Largest Kit on a E36 318Ti!

SC14 Supercharger Installation | Largest Kit on a E36 318Ti! | V4 M.O.A.B

Рет қаралды 35,217

4 жыл бұрын

Installation of the SC14 Supercharger into the BMW M44B19 Engine - Making it the Largest ever Supercharger with over one and a half liters of displacement, installed on one of these 4 Cylinder BMW's. We are using our pre production final prototypes of the HMW V4 M.O.A.B. system that supports both the BMW M42/M44 as well as retrofit support for the BMW M43 & M40 Engines.
This is the final in our 4 part video series about the H.M.W. Mother of All Brackets.
Introducing the HMW V4 (M.O.A.B) - A project to supercharge the 4 cylinder BMW's such as the M42, M43 & M44 found in the 318ti and 316i and 318is. We are using an AMR500 (500cc) and the SC14 (1.4L) making it the largest SC kit available on these motors; All while retaining the stock manifold!
Background Music:
Sound of Aging by Max McFerren
Lonely Troutman II by William Rosati
From the KZfaq Audio Library.

Пікірлер: 52

@yordanstanulov1166 4 жыл бұрын

very excited, consider buying one AMR500KIT when it's ready. Very nice work.

@bikehubjapan 4 жыл бұрын

Looking forward to this one...

@alpineweissm7501 3 жыл бұрын

Have you had a chance to dyno tune it yet? I’m very interested in this setup, it seems budget friendly

@SV867 3 жыл бұрын

Would be awesome if I could keep my m42 intake... I love the way it looks

@dillonharrison6765 8 ай бұрын

Where did u get the inlet adapters for the superharger from? The black things

@juliomartins6570 11 ай бұрын

have some video in the road? where you buy all

@rasjgo2 3 жыл бұрын

Haven't seen any updates on rev3limited

@Nabihbik 2 жыл бұрын

You are wonderful as always :) which is better in performance and modifications M44 or M42 ?

@HydeMotorWorks 2 жыл бұрын

The M42 would be a more solid engine to build on due to the block and also being OBD I its maybe easier to tune. But either way if you are building them (headgasket and headbolts and such) you cant go wrong with either one. They are both nice.

@rasjgo2 3 жыл бұрын

Whats up Any more updates

@sixtusdeffor6047 3 жыл бұрын

Hello am Sixtus from Ghana I have a 92 Bmw e36 and I will love to supercharger it any help from where I can get the parts thanks

@LucianT944 10 ай бұрын

Hello, what is the price for a sc14? Thank you

@Reflective-Matter 4 жыл бұрын

What kind of mods would you recommend doing to the engine to prevent it from blowing up when running it at a higher PSI? Can't wait to order this...

@Pcwmotorsport 2 жыл бұрын

With this u can beat on stock wont blow up i had turbo charged 370hp hold no problems

@gavinendsley 2 жыл бұрын

@@Pcwmotorsport 370hp stock m44?

@chikkenking6119 5 ай бұрын

@@gavinendsleymost likely an S52 engine

@Appydem 4 жыл бұрын

What power output are you getting on the Ti since installing this? And can I buy this complete kit?

@HydeMotorWorks 4 жыл бұрын

Hi, Yes we are selling them at our official Hyde Motor Works shop. very well priced...as for power..so the AMR500 Kit will see 5PSI or so, Good for about 50-60HP more at least, while the SC14 can push from 10 - 20PSI or so, really for a motor that can handle twice the power output. you will have a run down here - hydemotorworks.com/shop/product/v4-supercharger-kits/

@TheCatMilton 4 жыл бұрын

Any potential for an M10 setup? Would be cool for 2002, e21, e28, and e30 owners.

@HydeMotorWorks 4 жыл бұрын

We are working on an M20 setup. :) Maybe an M10 is not far away

@joostsonneveld5407 2 жыл бұрын

What can a stock m44 handle? Or do you place thicker headgasket? No feel for changing pistons or rods or crank....

@HydeMotorWorks 2 жыл бұрын

Its best not to push a stock engine beyond 8-10PSi and even that is with a good tune. Building it with some thicker headgasket to lower the compression and having some studs and bolts would be ideal to push the engine higher.

@Robertas_Grigas 4 жыл бұрын

Can you drive it with the pulley clutch dissengaged, does it pass enough air for the engine without spinning?

@jonahcass2793 Жыл бұрын

You would need to make a bypass valve most likely if you planned to disengage the sc

@B2310DEV 4 жыл бұрын

Hey, i have a m44 swapped e30, im about to add standalone ecu and supercharger.. can i reach 250hp on crank with m45 sc? Or i should get m62 instead? Danke schön

@HydeMotorWorks 4 жыл бұрын

Hello! I would say you definitely should get the small body M62 (also supported by the MOAB) or Just go with the SC14 MOAB. They can support 250 - 300 if the motor can handle it. The M45 may max out around 200-220, similar to the AMR500. Sie sind herzlich willkommen :)

@B2310DEV 4 жыл бұрын

Hyde Motor Works from what car does it go? All i got is the m62 from a big 3800cc engine

@theturtle2234 4 жыл бұрын

The only thing I have a question about is do you have to change the engine management system or injectors?

@HydeMotorWorks 4 жыл бұрын

Hi, most people since long (dasc days) to my knowledge seem to have used just an rising rate fpr and an afr wideband sensor as their tune, there is always the option to do better by adding larger injectors and a tune, if its obd 1 m42 you can use the ostrich 2 piggyback and rom raider to tune it, they are worth some $200 or so..m44 will have obd 2 and will require a flash. Really a good tune goes a long way to max your power and overall engine performence..

@theturtle2234 4 жыл бұрын

I appreciate this information in helping me understand what I’ll need to do thank you guys!!

@alentohida3718 Жыл бұрын

Any one know how to tune an m42 turbo low psi. I have done all mechanik part but now its the part i dont know absolutely anything 🤣. Tuning

@Pcwmotorsport 2 жыл бұрын

I dont get it how you mount throttle body on it ? And where air will come from to the engine?

@HydeMotorWorks 2 жыл бұрын

Grab the latest installation guide. hydemotorworks.com/installation-guide/

@keriplaton 4 жыл бұрын

Hello, this is amazing, I'd like to know how many hp I could reach. Thanks, cheers from Italy.

@HydeMotorWorks 4 жыл бұрын

Depending on the Supercharger anywhere from 50 - 150 hp on top of the stock motor. so 200-300 should be doable with the right tune

@keriplaton 4 жыл бұрын

@@HydeMotorWorks Would you give some link of the most power one? Thanks..

@HydeMotorWorks 4 жыл бұрын

@@keriplaton We havent made those public. Perhaps later in the year we will have some more to show.

@rabbiti1556 3 жыл бұрын

What a lubrication have a superchanger, oil from engine or ???

@faisme 4 жыл бұрын

Have you came up with a price for your SC kit?

@HydeMotorWorks 4 жыл бұрын

Yes, you could head over to the official HMW shop and see prices there.

@flippy9133 4 жыл бұрын

the AMR500 cost like 150$ and just the mounting stuff is 700?

@HydeMotorWorks 4 жыл бұрын

We are using an SC14 here, not and AMR500, SC14 typically costs $600 +

@flippy9133 4 жыл бұрын

@@HydeMotorWorks ah i got it mixed up because I watched part 3 of AMR500 and thought this is the next video :D

@Leelong_John Жыл бұрын

How much is the bracket itself ?

@HydeMotorWorks Жыл бұрын

Sold only as a Kit (bracket kit) hydemotorworks.com/shop/product/v4-supercharger-kits/

@sixtusdeffor6047 3 жыл бұрын

Hello

@aqib376 2 ай бұрын

Can this be install to.e30 m42is?

@HydeMotorWorks 2 ай бұрын

Yes how ever you need to convert to serpentine belt system from newer models as e36 and not older v belt. There is a upcoming pdf guide for that. Feel free to email us

@aqib376 2 ай бұрын

@@HydeMotorWorks thank you so much for the reply