Seafoam--can't believe what it did to my engine!!--Episode 4--Compression Test

Рет қаралды 784,837

Күн бұрын

In this video, Seafoam is used to clean the combustion chamber of an engine. Will Seafoam help or hurt the engine's compression? Hope you enjoy the video!
Products Tested In This Video (in no particular order):
Seafoam: amzn.to/31lowCx
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Пікірлер: 1 000

@piffdaddy420 6 жыл бұрын

i like this guy... he said "i hope you consider subscribing" that is really nice way of saying it. everyone else demands it. (just subscribed)

@pkdude5334 2 жыл бұрын

and most people say "like, subscribe, comment, blah blah blah" at the beginning. I'm like "dude i haven't even watched your crappy video yet"

@TheRockmart 5 жыл бұрын

what I like about your videos is that youre straight up about it and non biased

@ProjectFarm 5 жыл бұрын

Thank you very much!

@usonthegwaii 7 жыл бұрын

i'm surprised seafoam hasn't contacted you and given you a free case! are you reading this seafoam! the man deserves a free case for all the business he's sending you!

@ProjectFarm 7 жыл бұрын

usonthegwaii, The water test results might not please Seafoam. I haven't performed the test yet; so, I don't know. However, most commenters are voting water over Seafoam. Thanks for watching the video and for commenting!

@mitchellgiebler3396 7 жыл бұрын

life time supply to ya man....sea foam hook the guy up!!

@usonthegwaii 7 жыл бұрын

no, water doesn't clean the throttle bodies/carbs and intake valves like sea foam does. water does clean the combustion chamber and exhaust valve though. i wouldn't put water in my fuel tank to clean the fuel passages/injectors either. i also fill my fuel filter with seafoam when changing it on my 7.3idi diesel too...works wonders. seafoam in the tank also stopped a generator i aquired from"hunting" for idle too. and works great as a fuel stabilizer when storing things like pressure washers and chainsaws too. add to tank then run it for a minute or two.i' ve been using it for many YEARS and never have fuel issues in any of my motors, atv included.

@802Garage 7 жыл бұрын

I have no idea how water would do anything close to what Seafoam does.

@GModBMXer 7 жыл бұрын

802 Garage It's called steam cleaning. Water is the most effective way to clean out a hydrocarbon mess in your engine. There's plenty of articles about it to. Using a spray bottle into yhe throttle body is an easy way to clean out the exhaust valves and piston heads

@dy3dsl648 5 жыл бұрын

The most unbiased guy on KZfaq 😀

@ProjectFarm 5 жыл бұрын

Thank you

@drymoonproperties 4 жыл бұрын

I agree! He proved his testing from beginning to end. He sure impressed me especially on such an old hard worked machine.

@davidchild6428 4 жыл бұрын

@Ultra CNC it

@h7283 3 жыл бұрын

He Muslim

@jackmcatee4738 2 жыл бұрын

@@h7283 huh??

@Javii96 5 жыл бұрын

Scientific Method. Changing one variable at a time. That's why I love this guy!

@ProjectFarm 5 жыл бұрын

Thank You!

@jordogordo6280 Жыл бұрын

Look how young this channel is! PJ has come along way since these early days. By far one of my fav people on KZfaq!

@ProjectFarm Жыл бұрын

Thanks!

@alan6832 Жыл бұрын

@@ProjectFarm If it helps compression, it would probably be by unsticking rings and allowing them to spring out freely against the bore instead of being glued to the piston by carbon.

@Lees920 9 ай бұрын

Same here. His tests are valid and relevant to me. By far they are the most concise.

@matthewmann8951 5 жыл бұрын

I have a 1966 Ford i6 300 circuit. First the 300 i6 is an awesome engine. Anyway I saw your show and decided to go ahead and try for myself and, I could not believe the difference in lifters and rockers the engine has more power running and sounding great. All day at work I told my co workers what I had done and the results I achieved. My mind was is totally blown still is. You dont know how much I love and support what you do. Thanks again I would have never tried what I did and boy am I glad, thank you P.F. I owe You one. Lol happy testing, keep on rocking my brother, peace to you and yours. The best in 2019

@ProjectFarm 5 жыл бұрын

Impressive results! Thank you

@jonbrozer 4 жыл бұрын

I have a 69 300, I’m going to have to do this too! Thanks for the idea

@wildestcowboy2668 2 жыл бұрын

@@jonbrozer 70 $t8 6 (300)

@assistant752 2 жыл бұрын

Please don't and stop breathing in these fumes. Your family, Our family will need you to continue teaching our future generations. This message is for all !!

@gavdomdad 3 жыл бұрын

I can't believe the difference in your videos from then to now. I've loved watching the channel grow over these past five years or so!

@ProjectFarm 3 жыл бұрын

Wow, thank you!

@brandonwaltman4209 7 жыл бұрын

I really dig your channel sir. This is quality, intelligent, accurate stuff.

@rogerwoods9510 3 жыл бұрын

Wow! Blast from the past. How far you have come with your confidence and content production is amazing. Thanks for producing great content.

@ProjectFarm 3 жыл бұрын

You are welcome!

@tomcraigmatthews9300 4 жыл бұрын

I truly appreciate your common sense realistic tests. Thank you. Keep it up!

@ProjectFarm 4 жыл бұрын

Thank you very much!

@erikronning 7 жыл бұрын

These are terrific! I really like that you've tried it in different kinds of engines and run different tests on it.

@ProjectFarm 7 жыл бұрын

Eric, Thank you very much for the encouraging comments and thanks for watching the video!

@AndrewSmith-km6zb 2 жыл бұрын

Great test. I know this is an old video, but a very good practical example of these products in action. Renewed my faith in seafoam and Lucas. Thank you.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for sharing.

@TheLastQuaxel Жыл бұрын

I just found this channel today... I can't believe how good the content is. building adapters to test compression, before/after testing, all the time taken to record, edit and post so much stuff. The internet owes you a debt....

@ProjectFarm Жыл бұрын

Welcome aboard! Thanks for watching!

@complexity5545 2 ай бұрын

This guy is awesome. No BS, straight to the test. I watch the newer stuff and I was surprised to see this older video. Even in the early days, my man was doing the scientific approach with bare minimum equipment. The best.

@ProjectFarm 2 ай бұрын

Thanks!

@IronMan-ml5yi 7 жыл бұрын

I love watching these videos. it's fun to see the results.

@ProjectFarm 7 жыл бұрын

Ivan, Thanks again for watching the video and commenting. We'll see if water is the winner!

@LoreForgeOfficial 7 жыл бұрын

Heck yes! Another Seafoam video. Love these from you. SEAFOAM EVERYTHING

@ProjectFarm 7 жыл бұрын

Witches Brew Animations, Thank you for the encouraging words. It'll be fun to test water this weekend...can hardly wait! Hope you enjoy the weekend and thanks for commenting!

@Informal_Weapons 7 жыл бұрын

I'm so glad i found your channel. Very interesting projects and tests. Simple and informative Great work brother.

@ProjectFarm 7 жыл бұрын

Matt, Thank you very much for the encouraging words! Creating videos is a lot of work but I'm having a lot of fun putting these together. Thanks for watching the video and commenting!

@grantman64 7 жыл бұрын

Arguably the most comprehensive series of Seafoam test videos on KZfaq! Keep going! Also I want to say a huge "THANK YOU!" for using good video making practices: 1) Planning out your video before shooting - AKA scripting 2) Simple, steady camera work - tripods are your friend 3) Good audio - stay close to the mic, avoid windy conditions and other background noise 4) Editing - chop out redundant footage and make careful use of time-lapse. I've watched so many YT videos with great content that were rendered all but useless because the authors didn't follow these practices.

@ProjectFarm 7 жыл бұрын

grantman64, thank you very much for the encouraging words. I greatly appreciate constructive feedback on improving the quality of the videos. So, if you have suggestions within a certain video, I'd greatly appreciate your advice. Thank you for watching the video and commenting!

@grantman64 7 жыл бұрын

I think you are already doing a great job with your videos -- keep doing what you're doing! In my comment I was trying to point out to other video producers that you've set a good example to follow.

@WJHandyDad 6 жыл бұрын

I am so glad I found your channel. I love watching your various test videos. It's amazing how much you've improved your quality with each successive video too.

@ProjectFarm 6 жыл бұрын

Thank you!

@unclebs74 7 жыл бұрын

Another great video, you do a great job fully explaining everything and I too can not wait to see what the water does.

@ProjectFarm 7 жыл бұрын

Casey Gibson, Sir, thank you very much for the encouraging words! Thanks again for watching the video and commenting!

@parkerdragracing9475 7 жыл бұрын

Me to

@digitusimpudicus2325 7 жыл бұрын

Project Farm ... Now that was a good example of measurable evidence. Way to go.

@ProjectFarm 7 жыл бұрын

Parker Drag racing, Thank you very much for watching the video. I'm having fun with these projects and my oldest son is learning the basics. Trying to pass on a skill that will benefit him throughout his life.

@ProjectFarm 7 жыл бұрын

Digitus Impudicus, Thanks for watching the video and commenting!

@alanwhitsitt5196 2 жыл бұрын

This must be one of the first vids you did? You are definitely more confident and relaxed in your newer ones. Love them all! Thanks for the truth!

@ProjectFarm 2 жыл бұрын

You are welcome!

@adolfoabhurtadoc6106 3 жыл бұрын

Your videos have grown a lot in this years. Congratulaciones pall!! Please continúe improving your videos!!

@ramonalocksmith435 2 жыл бұрын

Hey Todd. I've been having fun going through a bunch of your old videos just to make sure I haven't missed any for "thumbs up". I realized something with these seafoam system videos, that when you moved beyond the ranger pickup videos, to the air-cooled utility engines, you were only using one part of the seafoam treatment, and only using the intake/hotsoak part. The fuel additive and the crankcase additive are just as important for a deep clean that cleans the valves + guides and the piston skirts / cylinder rings / grooves. I'm kind of curious now to see just how much improvement that would make.

@ziptiesnbiasplies 7 жыл бұрын

Hey man! I read the msds (material safety data sheet) on seafoam, looks like it's diesel, ATF, napatha and acetone... maby u should make some of your own and give it a try?

@ProjectFarm 7 жыл бұрын

I'm definitely not a chemist! Thank you for watching the video and commenting!

@ziptiesnbiasplies 7 жыл бұрын

Project Farm neither am I! but I'm gunna give er a try! I got a whole shit pile of old trucks in the yard here, always fun to try it on one of them. I did a video on wd40 vs ether for diesel cold starts, check it out if ya want! I ain't trying to push my vidyas on your channel, it's just the video was pretty entertaining

@SwifterSnail92 6 жыл бұрын

Smells like acetone

@forester057 3 жыл бұрын

@@ziptiesnbiasplies when you mow the grass and find a truck...

@eathans_small_engines8665 2 жыл бұрын

@@ziptiesnbiasplies lol or use brake Kleen

@802Garage 7 жыл бұрын

Man I am loving these videos. Great work. The soaking definitely seemed to do some more work. Like how you are replying to the viewers and doing tests for them. I doubt water will be effective. Keep it up.

@ProjectFarm 7 жыл бұрын

802 Garage, Thank you for the encouraging words! I do the best I can to reply to as many comments as I can. I really do appreciate peoples comments and advice! Thanks for watching the video and commenting!

@zacharywooten9327 6 жыл бұрын

Thanks for taking the time to make all of these. They're really interesting

@ProjectFarm 6 жыл бұрын

Thanks for the positive comment.

@cup_and_cone 7 жыл бұрын

Man, a walk behind edger! I haven't seen/used one of those in about 20 years. Much better than crappy 2-cycle string trimmer attachments that don't have the torque for thick grass...if you got the storage space.

@ProjectFarm 7 жыл бұрын

thechosendude, I agree. I don't know if they even make walk-behind edgers anymore! Thanks for watching the video and commenting!

@eathans_small_engines8665 2 жыл бұрын

@@ProjectFarm I think a few company’s do

@dennisyoung4631 6 ай бұрын

Recall seeing one from my childhood in the 1960s.

@darrylmcleman6456 4 жыл бұрын

Good one !!! Thanks. Cheers from Canada

@ProjectFarm 4 жыл бұрын

Thank you very much!

@Lees920 9 ай бұрын

Now you have my attention. I have an old Craftsman edger that i bought in 1979. I haven't run it since about 1990. All I ever did was change the oil and spark plug, and sharpen the blade. I will have some Seafoam coming soon and I'll give it a try and see how it goes. Thanks for another great test.

@justsayen2024 2 жыл бұрын

All your videos our so thorough you really have a top-shelf program and your comment section is a tribute to your professionalism

@ProjectFarm 2 жыл бұрын

Thanks so much!

@henrison 7 жыл бұрын

I just subscribe to you , because that's the best proofing test video ever seen ...

@ProjectFarm 7 жыл бұрын

Henrison Daily, Thank you for subscribing! Many more videos on the way. Thanks for watching the video and commenting!

@GroverDuffield 7 жыл бұрын

I have used both seafoam and water in different vehicles. I found seafoam performed well in company trucks that were not maintained well before I took the job. In the early 90's I moved to California from a non-EPA state. I had replaced my EPA carb on my Nissan pickup and was no longer using my 7 year old catalytic converter but still had it. I bolted the cat in and proceded to dribble water from a garden hose through the carb while maintaining a high idle for over half an hour. actually had a dribble of water coming out of my tailpipe. I took it in for emissions testing the next day. The truck had over 200k miles on it and passed the testing with flying colors. The test station said they rarely had vehicles test so cleanly. I had over 300k on it when I got rid of it.

@beckywatt5048 6 жыл бұрын

Grover Duffield I was taught to use water drip also,never used it on a vehicle w/ a cat on it,I presume it cleaned the cat with an hydrogen or steam reaction .A clogged or fouled cat probably causes most problems.(computer controlled carburetors what a nightmare here in the north.)

@Franco_Zada 4 жыл бұрын

We love you for your honesty, please dont be sold out like other guys. Thanks you !

@ProjectFarm 4 жыл бұрын

Thank you very much!

@orangetruckman 2 жыл бұрын

Ah, the beginnings of such an amazing channel 🤗 love it!

@ProjectFarm 2 жыл бұрын

Thanks!

@PhaedruS007 5 жыл бұрын

Real men use cinder blocks for knee pads to maintain comfort on the job.

@ProjectFarm 5 жыл бұрын

lol. Thank you!

@maniacmikef3348 7 жыл бұрын

Like the vids keep them coming . I'm definitely going to have to pick up the can of liquid Seafoam .

@ProjectFarm 7 жыл бұрын

Michael, Thanks for watching the video and for commenting!

@hansevensen8426 7 жыл бұрын

Michael F ope like that usually have an automatic throttle, that opens up all the way while it's starting, to get it to the preset rpm

@certifieddirtyidle1594 7 жыл бұрын

great video! I always look forward to the results.

@ProjectFarm 7 жыл бұрын

Erich H, Thanks for the encouraging words! Also, thanks for watching the video and commenting!

@jamesflanagan7102 7 жыл бұрын

Absolutely wonderful video keep up the great work! I vote for Seafoam.

@ProjectFarm 7 жыл бұрын

James, Thank you for the encouraging comments regarding the video work! Also, thanks for voting!

@awbawb63 7 жыл бұрын

Thanks for the videos. I'd be interested in seeing how Berryman's B12 Chemtool does.

@isaakwelch3451 4 жыл бұрын

Isn't that a carb cleaner?

@tomasnokechtesledger1786 7 жыл бұрын

Let's see, well the other seafoam guy, Chris Fix, still didn't do the water ingestion test. I hope you do.

@ProjectFarm 7 жыл бұрын

Oscar Flyer, Thanks for watching the video and commenting!

@ray02946 7 жыл бұрын

Oscar Flyer what is that my dude?

@jadesumsion 3 жыл бұрын

I love these videos. I don’t know how you have time to do all of them but it helps me out so much. From air filters to sea foam. I’ve used sea foam for years. Snake oil. Use it for everything.

@ProjectFarm 3 жыл бұрын

Thanks!

@joetucholksi2004 5 жыл бұрын

I love your channel, love your product testing

@ProjectFarm 5 жыл бұрын

Thank You

@cripplekid0902 7 жыл бұрын

About :540 it fired sound like it fired once without the spark plug

@masterdebater5098 7 жыл бұрын

You heard that too.

@nightmareinaction629 6 жыл бұрын

Yeah I was tripping

@nathankoroush7918 5 жыл бұрын

i heard it

@Chevy-tc9sf 5 жыл бұрын

Exactly what I thought.

@vernonbeach2950 5 жыл бұрын

exactly .crazy lol

@Sam-fj1ug 7 жыл бұрын

In the old days mechanics would drain the oil out of the engine then use kerosene to fill for oil and run for a minute or two then drain it,,,,voyolha clean engine. A long time ago in a galaxy far far away.......

@atlaseagle9353 7 жыл бұрын

I personally used diesel. drained oil, filled up with diesel, disconnect power line to coil pack or coils. crank a few times. let it soak. repeat the cranking every hour or so through the day. finally. reconnect the power to the coil packs. start your engine a few times. do not let it run any longer then 10 seconds at a time at the most. drain diesel, refill and change the oil filter, run the engine till you reach operating temperature. drain again, and change filter. it deeply cleans the engine if done right. it gets rid of the oil sludge and burnt oil build up in engine. sea foam in the other hand, cleans valves, the tip of the pistons, and the throttle body.

@ProjectFarm 7 жыл бұрын

Sam, Others have commented in the other Project Farm videos recommending this approach. I hope to try this approach in a future video! Thanks for watching the video and commenting!

@Slick1G3 7 жыл бұрын

sam that was before they invented detergent oil and it only was to remove sludge in the lower half of the engine and oil holes not the cylinders ....

@treasureplanet9082 6 жыл бұрын

Sam, I have seen that done in the Philippines. It works.

@jamesglenn2006 5 жыл бұрын

The kerosene would wash out the lead from the fuel.

@johnburgess4941 2 жыл бұрын

Not sure why I missed this one you made. Been watching from the beginning. Love your videos..

@ProjectFarm 2 жыл бұрын

Thanks!

@fuzzywoz 5 жыл бұрын

Love the videos, everything you learn helps a bit.

@ProjectFarm 5 жыл бұрын

Thank you

@ChristopherHayniedd980 7 жыл бұрын

Nice. I vote water.

@ProjectFarm 7 жыл бұрын

Christopher, All votes for water thus far! Thanks for watching the video and for commenting!

@AllAmericanDreamChaser 7 жыл бұрын

Christopher Haynie I'm agree with you on the water. Seafoam fools people because of the"smoke". Water does the same thing without the big "smoke" cloud.👍

@adammoon2170 7 жыл бұрын

use a 50 50 antifreeze mix have you ever looked in an engine with a blown headgasket the cylinders effected are spotless

@ProjectFarm 7 жыл бұрын

adam moon, Excellent idea! Thanks for watching the video and for commenting!

@sHoRtBuSseR 7 жыл бұрын

adam moon only problem is it causes deposits on valves and spark plugs

@adammoon2170 7 жыл бұрын

ive seen hundreds of engines with blown head gaskets and the valves where as spotless as the piston tops never really looked at sparkplugs close usualy change hose there cheap

@GModBMXer 7 жыл бұрын

Dylan Houser Seafoam does that aswell. It happens with any engine hydrocarbon cleaning

@mikefranklin7452 7 жыл бұрын

Antifreeze is actually a really good cleaner. I have actually used antifreeze to clean parts out in the oil field when I have run out of carb cleaner.

@jm4672 6 жыл бұрын

You're about the only honest person on there everybody else is so full of crap but you do everything unique on a Time basis before and after please keep the videos up I love seating honesty

@ProjectFarm 6 жыл бұрын

Thank you!

@jarrodweston7825 2 жыл бұрын

He is so genuine.

@GHOSTGXZ 7 жыл бұрын

When using a compression tester, you're supposed to have the throttle opened 100% if you don't believe me go to a parts store and read the instructions on the package

@ProjectFarm 7 жыл бұрын

Thanks for watching the video and commenting!

@LJRossPhoto 7 жыл бұрын

Yup, the throttle body must be at max potential.

@101Volts 7 жыл бұрын

Is that with the engine off?

@gunsareawesome5358 7 жыл бұрын

GHOSTGXZ lol

@waynes.2983 6 жыл бұрын

GHOSTGXZ yeah.

@IronMan-ml5yi 7 жыл бұрын

I vote for water.

@ProjectFarm 7 жыл бұрын

Ivan Man, Thank you for voting! Also, thanks for watching the video and for commenting!

@ticklesdust 6 жыл бұрын

for what it's worth, ive done water in my ford ranger after it was fully hot. Seemed to run MUCH better after. Per watching your other videos, did the marvel mystery oil :) thanks for this channel, much more scientific than most forums and i really appreciate it.

@popeyecop1 7 жыл бұрын

this is a great video with lots of knowledge as are the rest of your videos. this is the stuff farm kids always learned along with common sense while working around machines. keep up the good work.

@ProjectFarm 7 жыл бұрын

Robert, Thank you very much for the encouraging comments! I'm trying to pass along this knowledge to my children. Thanks for watching the video!

@popeyecop1 7 жыл бұрын

Project Farm what I learn from you gets passed on to my son as well. thanks.

@paulbradford8240 6 жыл бұрын

Keep up the good work. It's all very interesting and gets you thinking.

@ProjectFarm 6 жыл бұрын

Thank you

@mr.sandman5311 7 жыл бұрын

Why don't you use a spray bottle, it would be a lot easier to put smaller doses so it doesn't stall

@ProjectFarm 7 жыл бұрын

Semi-Deep Thinker, I agree that a spray bottle would have been a better option. I buy most of the products I test online. I've since ordered spray cans. Thanks for watching the video and commenting!

@ibanezmetal321 7 жыл бұрын

I'm curious about something, I'm not trying to troll and I am by no means any kind of expert, but wouldn't removing material from the combutsion chamber LOWER compression?

@ProjectFarm 7 жыл бұрын

Chauncey, Great question! Yes, it would lower compression assuming there was no improvement to rings and valves getting cleaned and sealing better. I believe the seafoam helped with that. Thanks for watching the video and for commenting!

@ibanezmetal321 7 жыл бұрын

Yeah man, thanks for answering my question. Makes sense.

@Shane-Singleton 7 жыл бұрын

Been watching the seafoam videos on your channel. Subscribed :) Can't wait to see the water tests. I've heard about doing this too.

@ProjectFarm 7 жыл бұрын

hallis1, Thank you for subscribing! Also, thanks for watching the video and commenting!

@milwsdl39 3 жыл бұрын

You reviewed to my favorite products restore and seafoam I like the way you do your testing awesome job guys keep up the great work

@ProjectFarm 3 жыл бұрын

Thank you, will do!

@rixogtr 7 жыл бұрын

Do your neighbours like you ? :D

@konnerkramer3381 7 жыл бұрын

btw that gauge doesn't measure compression it measures cylinder pressure. the two are similar but not the same. compression is a measurement of volume while cylinder pressure is the measurement of pressure the piston creates as it rises.

@ProjectFarm 7 жыл бұрын

Konner, Great point! Thanks for watching the video and for commenting!

@konnerkramer3381 7 жыл бұрын

Project Farm just thought I'd let you know either way great video keep up the great work.

@Liveforeever 7 жыл бұрын

konner kramer good point smartarse

@Liveforeever 7 жыл бұрын

Project Farm great video, no blabbing on and straight to the point, nice work man!

@mikefranklin7452 7 жыл бұрын

The gauge does not measure cylinder pressure because the cylinder does not hold any pressure. Its called a compression gauge because it measures the compression pressure created by the piston and piston compression rings as it compresses the air taken in by the piston and forced upward towards the engine head there for calling it a compression test. So in other words the compression gauge measures the compression pressure created by the piston and piston rings.

@GrantsPassTVRepair 7 жыл бұрын

Nice video. I look forward to seeing the water test. Thanks!

@ProjectFarm 7 жыл бұрын

Grants Pass TV Repair, Thank you for watching the video and commenting!

@matthewwebb1045 4 жыл бұрын

Please keep making videos i will watch as many as you make great job 👍

@ProjectFarm 4 жыл бұрын

Thank you, I will!

@whattheheck3553 7 жыл бұрын

he's pulling harder post cleaning. listen to the difference.

@misterlove7034 6 жыл бұрын

what the heck maybe he ate his wheaties before pulling the string

@zackinblack 7 жыл бұрын

After I used seafoam on my engine it fixed my cracked head gasket, cracked engine block, slipping clutch, and made my car sound smoother and it also fixed my a thrown rod and gave me an additional 50 hp. car mechanics and oil changes are just a conspiracy by oil companys to sell filters and a liquid that basically last years. seafoam will fix anything...

@betabilly 6 жыл бұрын

You mean, oil is not really needed? Gotta go to the beach where seefoam is free!

@xaderalert 6 жыл бұрын

Seafoam fixed my marriage!

@mso4433 5 жыл бұрын

Seafoam can fix anything but a broken heart.

@TCPUDPATM 7 жыл бұрын

Another great video. I'm very excited to see the results from water as well.

@ProjectFarm 7 жыл бұрын

TCPUDPATM PORTS, Thank you for the encouraging comments and for watching the video!!

@hatsunemikufan4 Жыл бұрын

You are a KZfaq national treasure. We are lucky to have you!

@ProjectFarm Жыл бұрын

Thanks!

@chaseriordan4008 6 жыл бұрын

I love sea foam! Thanks for the test! Keep it up 👍👍

@ProjectFarm 6 жыл бұрын

Thank you!

@kennystrange8705 3 жыл бұрын

It started a boat that sit for 7 years had weeds growing out of it but seafoam saved the day!!!!! Awesome products!!!

@ProjectFarm 3 жыл бұрын

Thanks for the feedback.

@omarguerrero2200 2 жыл бұрын

Thank you for posting your videos. I learned a lot and have used your methods and it did work for me👍

@ProjectFarm 2 жыл бұрын

You are welcome! Glad to hear!

@chrisbielecki2290 7 жыл бұрын

love the videos !! I enjoy watching the results thanks

@ProjectFarm 7 жыл бұрын

Chris, Thanks for watching the video and for commenting! Many more videos on the way. Which do you think will do a superior job cleaning carbon?...water or Seafoam?

@chrisbielecki2290 7 жыл бұрын

I'd have to say the seafoam. I've seen results from the steam and would have to believe the naphtha in the seafoam is what's doing most of the cleaning but it's also "steam" cleaning as well

@shoreline780 7 жыл бұрын

Great video!! Ive used seafoam many times. Its a great product!

@ProjectFarm 7 жыл бұрын

Todd, Thank you very much for the encouraging word about the video! Thank you for watching the video and commenting!

@maniacdaddy8047 4 жыл бұрын

Love your show.

@Txepsiyu 2 жыл бұрын

I love watching these old videos. The channel has aged gracefully.

@ProjectFarm 2 жыл бұрын

Thanks so much!

@patrickpeterman4890 6 жыл бұрын

lot,s of good information !! keep them coming; much appreciated,PATRICK.P

@ProjectFarm 6 жыл бұрын

Thank you!

@cyclepath78 7 жыл бұрын

Great series!

@ProjectFarm 7 жыл бұрын

Thanks for watching the video and commenting!

@ScottandTera 7 жыл бұрын

great Video.. keep em coming

@ProjectFarm 7 жыл бұрын

Scott, More videos on the way. I've been working on the next video all day running a test using water. Thanks for watching the video and commenting!

@isaaclang6031 2 жыл бұрын

What I REALLY like is the laid back music on this video!

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@GModBMXer 7 жыл бұрын

This has me so excited for my car's seafoaming. Thanks for the video! :)

@ProjectFarm 7 жыл бұрын

GModBMXer, Thanks for watching the video and commenting!

@brettanderson9810 5 жыл бұрын

PS, thanks for all your awesome videos, they are very helfpul!!

@ProjectFarm 5 жыл бұрын

Thank you!

@real_life4735 3 жыл бұрын

Had to sub. Great video

@ProjectFarm 3 жыл бұрын

Thanks! Thanks for watching and subscribing!

@ConstantlyDamaged 2 жыл бұрын

It may have only been a low boost at repeated cranking, but that compression boost at initial crank should make starting a *_lot_* easier. Great video!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@arfreeman11 Ай бұрын

I'm watching this 7 years later and its interesting to see how he's changed and improved. Just like so many other things, being a good KZfaqr is a skill that can be practiced. I look forward to many more years of Project Farm.

@ProjectFarm Ай бұрын

Thanks!

@christophergilpin9663 7 жыл бұрын

this my favorite channel love the videos

@ProjectFarm 7 жыл бұрын

Christopher, Thank you for the encouraging comments regarding the channel. I'll continue to work hard at creating good videos! Thanks for commenting and hope you enjoy the weekend!

@jhuntosgarage 7 жыл бұрын

I like these videos, great job!

@ProjectFarm 7 жыл бұрын

J Hunto's Garage, Thank you very much! Thanks for watching the video and commenting!

@trakyboy5128 Жыл бұрын

Love this real world testing !!!!!!! Would love more cuz we all have a need for something that truly clean!!!!

@ProjectFarm Жыл бұрын

Thank you! Thanks for the suggestion.

@millerkiller6496 3 жыл бұрын

I’m glad it helped compression. I’m thinking about doing this on my leaf blower and my truck

@ProjectFarm 3 жыл бұрын

Thanks for sharing.

@rasblack3198 7 жыл бұрын

love the video can wait for the next one

@ProjectFarm 7 жыл бұрын

Ras Black, Thanks for watching the video and for commenting! Do you think water will outperform Seafoam?

@rasblack3198 7 жыл бұрын

well i believe the seafoam uses a detergent to clean the carbon while the water steam cleans which i think mihgt be better but not used in todays time becuz if you dont kwy the rpm high or spray the water to fast hydrolocking will happen and most will blown motor becuz of these mistakes and since the seafoam is petrol based is safe for people who arent as exp

@MichaelRHull-wy7wg 6 жыл бұрын

Very good video!

@ProjectFarm 6 жыл бұрын

Thank you!

@tommyfacekicker 7 жыл бұрын

Great test

@ProjectFarm 7 жыл бұрын

tommy facekicker, Thanks for watching the video and commenting!

@jdickborron1 4 жыл бұрын

Love this show

@ProjectFarm 4 жыл бұрын

Glad to hear!

@hitchman0011 Жыл бұрын

your very detailed and thorough

@ProjectFarm Жыл бұрын

Thanks!

@JanessaforIsrael Жыл бұрын

I purchased a 2008 scion xb few months ago, 193,000 miles transmission fluid never been changed going to use for transmission soon, put in crank case cleaned it heck out of it...had to change my oil (yes changed my own oil) YAY and filter....going to to another transmission change but use seafoam first in it and drive for a while... I love SeaFoam...

@ProjectFarm Жыл бұрын

Thanks for sharing.

@ronanderson1816 3 жыл бұрын

Thank you for sharing !

@ProjectFarm 3 жыл бұрын

Thank you!!

@ohyeah3750 7 жыл бұрын

Very well done.

@ProjectFarm 7 жыл бұрын

oh yeah, Thanks for watching the video and for commenting!

@maxguitarhero 7 жыл бұрын

about to seafoam my 1989 Toyota pickup today after you Ranger video. Good stuff man

@ProjectFarm 7 жыл бұрын

Maxwell, Those Toyota trucks last forever! Did you experience any improvements? Thanks for watching the video and commenting!

@maxguitarhero 7 жыл бұрын

Yes sir! You could feel the whole truck idle before hand. Now? Smooth as silk. The low end torque had a half second delay when you'd mash the gas, now I can use my big toe on the pedal and it picks up just great. After the hot soak the smoke just poured out. I must have left a good half mile path through my neighborhood getting to the highway to really open it up. When starting it the engine had to crank about 3 times before it'd start up, now on the first turn over it's running. I haven't even run through the oil and gas yet, just put em in an hour ago, did the intake wash out at the same time. Immediate results.

@timpope1221 5 жыл бұрын

Became a Patreon today Todd hope this helps with future videos !

@ProjectFarm 5 жыл бұрын

Thank you very much for supporting the channel! It helps a lot.

@_brushie 2 жыл бұрын

I used Seaform on my Audi A4's intake. It's got 267k miles on the engine, and that faster compression build up was something I've noticed when I started the car every time afterwards.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@wildefox1478 6 жыл бұрын

It's hard to get an accurate compression reading in some small four stroke engines especially horizontal shaft engines because all of the horizontal shaft engines I've torn down had an automatic decompression system on the camshaft which is obviously so it's easier to pull the engine over with the rope. Seafoam did do a great job at cleaning and even increasing the compression slightly in your engine. That's awesome that you've had that edger for 25+ years and it still runs like a champ. Good old Briggs and Stratton engines will run forever if you take care of them.

@ProjectFarm 6 жыл бұрын

All great points.