Where did you get it from

Thanks to your comment I know I'm able to roll Segway on Holland Osterdam and the other dams they have. I became disabled this year and due for vacation soon. After Holland do you have to get accustom to all the mediocre dining compared to real fine dining at your disposal aboard Holland Am.?

Thanks for the Kudos. Hope the handle makes your ride more enjoyable. And be sure to contact me if you ever have any issues with it.

Yes of course you absolutely can steer with just one e hand.

Late response, but yes you can "tow" it around. Bigger factor for your question is the weight if you run into that. S-Max is about 15lbs heavier!!! Also, I have never run out of range, but I have had times that I wanted to dismount and walk. S-Plus will actually follow you, which is an awesome feature that I use much more than I ever thought I would. I have even had it carry my groceries. S-Max does not have that feature.

Miniplushandle.com

Seriously?

I could make you one with all the components being black except for the pipes. That's the short version. Long version is: I could actually custom make it from just about any color and I have thought of offering that, but unfortunately that would drive the cost and time way up. Each handle takes a bit more than one 2 Kg roll to produce. Each roll is $25. So I would have to purchase 2 rolls to successfully complete one custom colored handle and then shelf the rest of that second roll and then buy a third for a potential subsequent order. That would be the case if I only used one printer, but I use multiple printers. It takes about 120 to 150 hours of 3D printer time to make all the components for one handle (Then at least an hour to trim and hand assemble everything). For that reason I have multiple 3D printers going to make the parts. In order to offer more than one color that would mean having multiple rolls of each particular color to keep the process going and the need to switch out colors all the time. Very time consuming already for a little "side business". There really is not that much demand for these handles as you can imagine. These S-Plus Segways are cool as heck but not all that much in demand. Also, a couple of my 3D printers have the ability to pause when they run out of filament but not all of them so that also means extra material to make sure I always have a pretty full roll on those machines that could potentially run out of material in the middle of a print which wastes a bunch of time and money. All those reasons together is why I pretty much stick with one color. So, long story short, I could do a black one, but it would be a special order thing and because of the extra time involved I would probably have to ask for another $15 or so. One caveat to the pipes. You could buy some black schedule 40 PVC pipe on your own and replace the white pipes that it comes with. It is simply schedule 40 PVC pipe.

Www.miniplushandle.com

L S thanks I just ordered one

www.miniplushandle.com or www.splushandle.com

www.miniplushandle.com or www.splushandle.com

No it is not. This handle is specifically made for the S-plus aka miniplus. The knee pad is slightly different.

@@Skul-Ski thanks for your response. so you don't have any other product or alternative for Ninebot S, right?

@@hamoonmadady3463 Not at the moment.

Personalmente li faccio uno alla volta e poi li elenco su E-Bay ogni volta che ne finisco uno. Richiede da 3 a 4 giorni per crearne uno. Puoi cercare E-bay ora per le inserzioni completate per trovare gli ultimi che ho venduto.

Www.segwayhandle.com

Yes, definitely poor sound quality. I just made that video on the spur of the moment without any real preparation and the intention to re-make it. Just never got around to it again. I will re-shoot one and maybe get a remote mic or just try to do a voice over in the next month or so.

@@Skul-Ski I really liked the video, because it clearly showed the fundamental basics from beginning to end of the product. Some severe difficulty listening though lol. I wanted to add I went to your website to purchase. It didn't load well, maybe my security settings. However, I saw your video stating your materials were being donated to Covid help. What I couldn't clearly discern was if you were selling the folding handlebars still (surplus supply) available.? Do you have a folding Handle Bar to sale for the Segway S (Mini) Plus?

Yes I did just send a couple replies

It is very well made and extremely strong. I’ve had one for about 2 years. Still use it.

I have sold hundreds. I did have a few warranty replacements of broken hinges in early models but did a redesign a couple years ago and haven't had a claim since. 3D printed parts are quite resilient with the proper thickness and infill settings. I'll give you an example. At my work we regrind 80,000 lb work rolls for a steel mill. These rolls sit atop 4 3D printed pads that are about 8" x 8". We use this technology now instead of brass pads.