SHOCKING FIND - SO bad I had to fix it IMMEDIATELY

Рет қаралды 188,348

Күн бұрын

SHOCKING FIND - SO bad I had to fix it IMMEDIATELY.
Join Jordan, John & Reuben as they hit the beach not just to eat ice cream but attempt to install a Hypervolt electric vehicle charging point in ONE HOUR! We know they can demolish ice cream but is the real EV charger challenge possible? Watch to the end to find out.
Todays Video Sponsor:
Tradify - get 50% off your first three months with Tradify using our code "artisan" here:
bit.ly/3RLZ3L0
🚨Subscribe to our KZfaq Channel for more great electrical content: kzfaq.info...
🧰🛠️ Tool Of The Day 👇
Unilite UK1 Utility Knife
Get 25% off all Unilite Products using our code "ARTISAN25"
UK Store - bit.ly/UNILITE
Europe Store - bit.ly/UNILITE-EU
USA Store - bit.ly/UNILITE-NA
Australia Store - bit.ly/UNILITE-AUS
➕Get more from Artisan Electrics here!👇
linktr.ee/artisanelectrics
💬Artisan Electric Discord - Join our Electrical Community! 👇
/ discord
⏱️Timestamps
00:00 An Epic Episode
00:48 Ice Cream Disaster
01:00 Today's Challenge
01:30 John Explains The Plan
02:18 Neat or Messy Board?
03:42 True Artisan Tool Swap
05:46 Tug of War
06:36 What Would You Do?
08:33 John's Hidden Secret
09:07 Tool Of The Day - Unilite UK1
10:05 4 New Pringles For Life Members
11:03 Big Debate - Shorts, Safe Or Unsafe?
12:56 NO WAY!
15:25 In The Bucket
17:13 Tidying Up The Board
18:08 Why Do You Have That John?
19:37 Final Checklist For EV Installs
22:56 Reuben Rates Jordan's Board
23:52 Ice Cream Disaster Continued
25:01 BONUS CLIP!
🔦Unilite Work Lights:
Get 25% off all Unilite Products using our code "ARTISAN25"
UK Store - bit.ly/UNILITE
Europe Store - bit.ly/UNILITE-EU
USA Store - bit.ly/UNILITE-NA
Australia Store - bit.ly/UNILITE-AUS
🏷️😱 Big Boots - get 5% off our amazing work boots when you use our discount code "ARTISAN" at checkout here bit.ly/BIGBOOTS
🎵 Use music the Artisan Way - Sign up to Epicmedic Sound here 👇🏼
www.epidemicsound.com/referra...
🔔 Become a Channel Member To Get Access To Exclusive Perks 👇
➤ / @artisanelectrics
✅ Check Out All Our Favourite Tools Here 👇
➤ www.amazon.co.uk/shop/artisan...
-----Electricians Business Course-----
📩 Sign Up To The Electricians Business Course Here And Get The First 4 Lessons Free 👇
➤ bit.ly/2Z582zI
🔔 Subscribe to TOOLS4SPARKS KZfaq Channel 👇
We Also Have A Dedicated KZfaq Channel About Tools:
➤ / tools4sparks
-----MY ENERGY PROVIDER-----
🐙 Get £50 credit when you switch to Octopus Energy 👇
➤ share.octopus.energy/zappy-sh...
🏷️ DISCOUNT BUSINESS SUPPLIES 👇
➤ www.amazon.co.uk/tryAB?tag=ar...
📈Make the most of your KZfaq analytics with TubeBuddy - Sign up here👇
➤www.tubebuddy.com/ARTISAN
-----TRADES INSURANCE DISCOUNT-----
If you need to renew your public liability insurance or need tools in van insurance, I recommend Rhino Trade Insurance, I've just renewed my insurance with them.
🏷️ Use My Discount Code “ART5” and you get a 5% Extra Discount On Their Already Excellent Prices.
➤ www.rhinotradeinsurance.com/quote
📞 or call 01162437904.
📱 Don't Forget to Follow Social Media, FOLLOW US on Your Favourite Social Networks 📱
💬 Artisan Electrics Discord
➤ / discord
📸 Artisan Electrics Instagram Account 👇
➤ / artisanelectrics
🐦 Artisan Electrics Twitter Account 👇
➤ / artelectrics
📓 Artisan Electrics Facebook Account 👇
➤ / artisanelectrics
⏰ Artisan Electrics TikTok Account
➤ / artisanelectrics
💼 Artisan Electrics Linkedin
➤ / artisan-electrics
🎥 Get in touch with the Media Team
➤media@artisanelectrics.co.uk
This video is for entertainment purposes only please do not attempt to copy or recreate it. Do so at your own risk.
#sparkylife #electricianlife #artisanelectrics

Пікірлер: 466

@artisanelectrics Жыл бұрын

Tradify - get 50% off your first three months with Tradify using our code "artisan" here: bit.ly/3RLZ3L0

@alexwade9921 Жыл бұрын

As an owner of many powered drills, both battery and mains, I have to say that those Stanley hand drills are an awesome bit of kit. I’m 51 years old and I grew up with one exactly the same model as that available to me. It’s still a treasured possession. If you’re doing precision work on something like aluminium or plastic, and hand holding, you can’t get anything more accurate. You can go really slowly and adjust as you go, and easily position a neat and clean hole within 1/10th of a mm of where you want it. Great for small pilot holes prior to power drilling as well when you need that accuracy.

@notpoliticallycorrect1303 10 ай бұрын

I'm a hobbyist woodworker and have a couple of those exact drills, still used regularly for all the reasons you mentioned. I also have a traditional bit and brace type drill,the bits are worn badly now but there is a pleasure in using it.

@stevejagger8602 Жыл бұрын

Talcum powder is an excellent dry lubricant to ease the pulling of cables through conduit, or for pulling twin and earth cable within or through an existing run of similar cables.

@marktssd4161 Жыл бұрын

Or for making putting on your Class 0 gloves easier.

@syrus3k 3 ай бұрын

Or for fixing your sweaty arse on a hot day

@bradleyjames3709 Жыл бұрын

We didn’t use mechanical hand drill for drilling masonry, with out percussion it would take ages. Sized Rawl chisels tapped with a hammer while turning by hand were remarkably quick. When working without access to mains electricity rawl chisels we’re the way to go. Only good for an inch or so deep to take rawl plugs though.

@Ragnar8504 Жыл бұрын

One step up was a piece of black gas pipe with a couple of teeth cut into one end. An old-timer plumber taught me that trick when we had to drill a 450 mm brick wall for two 18 mm pipes and didn't have a large enough SDS bit, worked surprisingly quickly with a proper lump hammer. Exactly the same technique, just 3/4" or 1" holes all the way through a thick wall if necessary.

@zxcvin123 Жыл бұрын

Bradley You know it. It makes me laugh when I see these guys showing a young trainee how to use old tools and don't even know what are for themselves and the trainee will only use battery tools anyway. Also 3 blokes to put a power point in and that guy chatting and not working who is paying him. Come on mate it's work not a fashion show.

@michaelmason5174 Жыл бұрын

Yes Rawlplug jumper , what about the buckle clips every 6 - 9 ins for twin and earth without mechanical hammer , i use to rewire schools like this , i have arm muscles like mr universe

@arjanvanraaij8440 Жыл бұрын

Rawl chisels. The oldtimers collegues spoke of those, when i was complaining about the 7.2 volt nicad makitas 20 years ago.

@cuebj Жыл бұрын

Ha ha. Wooden plugs... remember the cold chisels and wood plugs. My first metal case Black & Decker electric drill couldn't make a mark on London sewer bricks in my parents' house.

@mattwilson6758 Жыл бұрын

Hi all the way from Australia, just wanted to say I've been a long long time watched and pretty much first time commenter. I'm a certified electrician and I feel like I always see only the worst with past dodgy installs/electrical work and sometimes it makes me lose faith in my trade and I often wonder what's the point. But seeing you guys always post such great videos and showcasing your professional workmanship and expert knowledge and also your customer service quality. It fills me with great pride again to know somehwere out there are blokes that care just as much as me, and I can sleep better every night knowing that, props to all of you and keep up the excellent Artisan work !

@joparish1037 Жыл бұрын

Love that old Stanley hand drill. Remember catching my finger in the unguarded cogs - something you only do once! 🤣

@asbestomolesto Жыл бұрын

Well, I can state that here in Italy almost *NOBODY* does safety checks, testing and installation like those. I never saw an electrician here doing something like that. NEVER! It's amazing. Thank you :)

@tekcore6290 Жыл бұрын

BUT at least we use pvc corrugated tubes so that we don’t make the mess they do abroad😂… Unless you live in Pisa where due the high demand of housing (because of students), it’s full of houses with 1960s wirings… I was shocked when I found out those buildings with modern 16A RCBO’s at the top and 6A (yes, six amps) 1950s sockets (the ones using the round box), powered by 1mm2 (or thinner) cables. The estate agents don’t give a shit and call them “code compliant and efficient”.

@larsi4139 Жыл бұрын

you should come to norway, thats even more strict

@joanofarc708 Жыл бұрын

If you don't check and something happens you can end up in court because your the last man in

@JustaCuriousity Жыл бұрын

You should come to Indonesia and compare 😂

@kaasmeester5903 8 күн бұрын

No sparks, no trips = passed inspection!

@icarossavvides2641 Жыл бұрын

Suggestion for getting 'round the step. Drill two 45deg(ish) holes across the corners and thread the cable through them and across the front. Saves having to make a sharp bend to get 'round the corners?

@cuebj Жыл бұрын

Still have to trust the step is sound construction. I'd have gone straight through till they reminded me of steps that break away with very little drilling.

@mx97jb Жыл бұрын

Where is the board isolated from 8:00? You had your finger right next to the exposed busbar, there was no isolator and the cut out fuse was still in?

@pjeaton58 3 ай бұрын

7:40 on my screen - but you are quite right, not a good influence, video should be taken down and there should be regs to have such bus-bars insulated, too many would be electricians with clever certificates out there !

@MikeyC29 2 ай бұрын

He’s gonna hurt himself one day as he’s getting complacent all in the name of making these vids..

@chrispartosbro4555 2 ай бұрын

I was looking at where he had his hand at 13:06 compared to where he was looking, then seeing it live n being switched off (as such!) ten seconds later,

@JamieRyan92 Жыл бұрын

I've used talc for pulling cables through conduit, works well and less messy than the old fairy liquid

@Motivationalsesion Жыл бұрын

that's the reason he has it, he knows the old tricks.

@OJHussick Жыл бұрын

Cheaper and less messy than Yellow 77 as well.

@faisalmoghal4055 Жыл бұрын

Yep was gonna say the same thing. Same reason they put french chalk in flex so it's easier to pull the sheath off

@stillthakoolest Жыл бұрын

In some areas of hospitals here in the US, it is the only wire pulling lubricant allowed to be used

@daniela4530 Жыл бұрын

Do you spray it on the cable before pulling? Or try force it as far down into the conduit as possible before doing your run?

@chrisholt2474 Жыл бұрын

Well done Jordan for sorting that fuse board out, it was messing with my OCD too. Great job, great team, well done all. Jordan is a fantastic boss, you are lucky lads. 👍👍👍

@jimmylovescake6813 Жыл бұрын

When installing a consumer unit, should you leave enough length to allow for future adjustment or board upgrade / replacement? This is what I do, but at the same time keep everything dressed tidy.

@hansgeerligs5466 6 ай бұрын

As a DIY-er i found that on ALL drilling jobs it's more handy to have the vacuum next to the drill because the dust goes everywhere you don't want it....

@djoneselec5100 Жыл бұрын

Thanks for the shout out that was a great fun video. I’ve started installing Hypervolts because of your videos so was great to see another! More importantly why did HP change their name? 😂

@gpc39 Жыл бұрын

HM for the Jubilee?

@calyodelphi124 Жыл бұрын

That trick with the glove and running your fingers down the wire to straighten it up is similar to my trick I use when terminating network cable. I use the outer sheath of the cable between my fingers to straighten out the spirals after untwisting the pairs and it makes them so much easier to work with after that.

@cuebj Жыл бұрын

Nobody ever used those hand drills for mortar. But I did use them in 1960s and 1970s in wood

@HorvathAndreas Жыл бұрын

it is so nice to watch your videos. Your attention to quality and details is great. I worked in the UK for two years (mainly doing network stuff) and it was terrible to see how low the quality standards were for anything behind the scenes (and not visible to management).

@richardjones5255 Жыл бұрын

I am no electrician, and in no way pretend to know how to wire up a modern, (or an old) main distribution/fuse board. When you took off the cover, the wires alarmed me. Some appeared to have been nipped against the cover, the mess was obvious. You sorted it out in short order, leaving something that was a pleasure to see, and will inspire confidence in any qualified trades person who looks in the future.

@B_T_B Жыл бұрын

Superb. As other coments have mentioned. Liked the explanation of the job at the end with why it was important to check and Reuben is now giving good banter!

@alanreynolds5985 Жыл бұрын

It always makes me smile when you insist on having the fuse board neat, when the wire can follow the most random path to the sockets or lights. Electrons really don’t care, do they? I always prefer a bit of slack rather than cut the wire as short as you can in the interest of neatness. This is pandering to your OCD only. And I could still see exposed copper. :)

@RedAyeJedii Жыл бұрын

Also extra cost to "fix" it lol

@Peanutbuttertanks Жыл бұрын

Idk how it is in the UK but in the US, people see it as a sign of a prideful electrician. So it’s more of a statement/signature then a functionality. I agree, add slack. But also, makes trouble shooting easier for the next guy.

@BPo75 11 ай бұрын

Copper should be a bit exposed so you know there's no insulation in the clamp doing a visual inspection... but never so much you can touch it with your finger.

@harryandrew1277 8 ай бұрын

Make it neat, with a service loop and better doing neat work as it's pride in your work

@alanreynolds5985 6 ай бұрын

Having watched this again. I would have sued you for interfering with my board when it wasn’t in your remit, as you actually admitted.

@neilbissett1240 Жыл бұрын

Top notch to do the re-fit of the board cables as well 👏👏😎

@kaysonntag74 Жыл бұрын

The problem is that it always falls back on the company that worked on the Fuse Box last. From that point of view, you did everything right. I see boxes like this almost every day here in Germany. This is what happens when everything has to be done extremely quickly and cheaply. Real proper work unfortunately takes a bit longer and costs a bit more. Although not by much, as you show in the video.

@flinch622 Жыл бұрын

Box-ology is overrated. The very first thing to go when troubleshooting is needed is probably the zip tie looming wires together so an amp reading can be taken. It won't be replaced.

@OJHussick Жыл бұрын

The black clips are for physical clamping on the top hat DIN rail, not the copper busbar. That’s held in by the terminal screws, no doubt, secured to the correct torque as per the manufacturer.

@joeb1642 Жыл бұрын

I was just about to point out the busbar. Ive seen the same thing myself recently on a fusebox board. Its quite obvious to me, don't know how people make that mistake.

@herrtomas6729 Жыл бұрын

Ever considered using 20/25mm hole punch to provide cleaner edges for your glands? 3mm pilot, open to 10mm then spanner to wind the punch through. less flying swarf, and a totally clean edge. Used these for many years, and not expensive.

@johnbrookes9830 Жыл бұрын

All that metal swarf from the hole saw inside the enclosure is not a great idea. Thats what hole punches were designed to eliminate.

@pumpduddytag23 Жыл бұрын

or use a magnet to clean the metal filings awy

@herrtomas6729 Жыл бұрын

Magnet in cling film, (or similar) makes it easy to clean the magnet. But I still find punches are cleaner.

@johncorbett1130 Жыл бұрын

Minute Metal swarf inside consumer unit. Where in the regs about this?

@herrtomas6729 Жыл бұрын

@@johncorbett1130 simply best practice for any trade - keep it clean and clear…. Doesn’t really need a reg to state it

@stevelawrence7111 Жыл бұрын

If you put some insulation tape around the holesaw it won't fly through the metal casing. Stops damaging anything behind the metal casing.

@seanforder8824 2 ай бұрын

While the board is live too 😮

@pagles1 Жыл бұрын

Just found this channel, I can't believe I have seen sparks clean up after themselves!! Good job guys.

@shaunpookey Жыл бұрын

Great video as always, I like how you used a stuffing gland so much quicker

@philipsmith0752 Жыл бұрын

awesome video and great Hypervolt install ,Jordan , John and Reuben

@artisanelectrics Жыл бұрын

Thanks 👍

@stuartlee8041 Ай бұрын

I was a subcontractor on an industrial new build a while ago, doing the the mains boards, i had a bollocking for making them too tidy, " it's not a F****** beauty contest " I was told.

@ericcarver1341 Жыл бұрын

You were speaking of too much copper showing on the terminations of the consumer unit. Many times in industrial applications they actually want a little bit of copper showing so that they know you aren’t landed on the insulation.

@BPo75 11 ай бұрын

Same in Sweden, but it's a thin line to toe here: you want enough copper to be visible to make sure you haven't crammed insulation into the screw clamp, but never so much you no longer are IP2x, i.e. you can get a test probe on it but not a finger.

@pm1104 Жыл бұрын

Love the fact that you completely re did the fuse box………………it was such a mess !

@alanjrobertson Жыл бұрын

Wow, that board looked SOOO much better after! (pissed myself at Ruben's "which was before and which was after" comment!!) Nice with the torque screwdriver too.

@Vwfan Жыл бұрын

Baby powder stops the chaffing under those Super Mario Boxers! If you know you know lol. Jordan. Your attention to detail is sublime! Well done guys!

@artisanelectrics Жыл бұрын

Oh thank you!

@radiotowers1159 Жыл бұрын

Nice video guys, a comment about the extra work you did in the consumers unit not dangerous but just sloppy workmanship. Now recently retired I used to get involved in jobs which went to court because of electrical fires and worth noting to ALL , electricians in particular in this case. If you come across a dangerous electrical installation problem , which you may even inform the customer about but do nothing about ie you do not disconnect etc, as the last professional with the knowledge to recognise the danger and something happens you could be left liable and face prosecution. So good work in tidying up the sloppy work and put that wheely Stanley drill back where it deserves.

@grahamgodwin7200 Жыл бұрын

Talc serves 2 very good uses. *Help prevent chaffing. *If you get PU glue on your hands, shake talc on them, it prevents the stickiness (which helps keep hands clean.

@BarneySaysHi Жыл бұрын

You guys have a great team! And you're right about tidying that consumer unit! I'm not a sparky (even though I went to school for it) but my OCD was tingling on that one!

@thehowelldiaries Жыл бұрын

Loved the video guys! Enjoying the clips at the end 😂

@artisanelectrics Жыл бұрын

Glad you enjoyed!

@johnwarwick4105 Жыл бұрын

Thought everybody used that 4mm earth sleeving, I hate it and use the small stuff but never seem to find anybody else using it. (though to be fair don’t do much domestic) Looks so much neater. Can’t believe you re-did the whole board

@johncorbett1130 Жыл бұрын

That wasn't done in "the hour" and neither was ev install Can easily see that(edit,edit,edit) by just watching the time it took them to run the cable round the back of that post!

@swifty5783 Жыл бұрын

Great video as always. I would be careful about moving your hands around the base of the unit in the vicinity of what looks like an exposed live busbar though.

@johncorbett1130 Жыл бұрын

Might be something to do with making a video and chatting while installing, not really the best way of concentrating on the job!

@freethink3r Жыл бұрын

Great video guys! Very informative! One question, do you not need to use a Type B RCBO for EV charging so that AC, Pulsing DC and Smooth DC >6ma are accounted for?

@jonathandugan7418 Жыл бұрын

another good video 👍that consumer unit must of been a Friday job for someone 😂, shame about the ice creams melting

@ryanj3404 Жыл бұрын

Reuban the bosses work is always a 10/10 🤣🤣

@goober-ll1wx 8 ай бұрын

HP Sauce and Heinz Salad Cream are both to be temporarily re-named, to celebrate the Queen's platinum jubilee...

@TheOmegaRiddler Жыл бұрын

I wonder if the person who wired up that box was trying to speedrun the job as well to get some ice cream.

@JasperJanssen Жыл бұрын

His ice cream was melting already while he was doing it.

@Daniellee-gs6ef Жыл бұрын

Welcome to The Rock (Canvey Island). Glad you made it out safely.

@marymadigan9707 Жыл бұрын

Fabulous job guys loving your channel 😎👏🇮🇪

@Impulse5596 Жыл бұрын

Really liked the Torque Screwdriver use.

@tobypettit6221 Жыл бұрын

Good ol' Canvey! Certainly distinctive!

@lundieelectrical Жыл бұрын

Talc for stopping fibreglass fibres from loft insulation getting into your pores. Works a treat 👌

@Chris-sd8zk Жыл бұрын

I think the consumer unit would have been throw in as fast as possible because that’s all most employers want.

@TheChipmunk2008 Жыл бұрын

I use talc on my 1000v gloves, especially in this weather. but yes also for cable pulling

@tommcdermott5641 Жыл бұрын

Great news about Cory ! 🎉🎊🍾🥳

@chrisfinn7907 Жыл бұрын

Hello Artisan...recently discovered your channel and now subscribed...thanks for showing pictures of the hand drill..reminded me of my grandad and dad...God bless their souls..surprising the difference between 2ml and 4ml sleeving makes... I now live in Thailand..hmm the least said about electrics and installation..

@g-labs Жыл бұрын

love the way you have your fingers next to a live busbar

@ppdan Жыл бұрын

Nice clean work, well done.

@graeme6969 Жыл бұрын

Really good video and love the banter

@stephenwillis9518 Жыл бұрын

Talcs for cable pulling, also Jordan just be careful with meter boards, personally I would say that board could of been possible asbestos. With in your RAMS you probably would touch the meter board, but obviously moving cleats is a spur of the moment situation, may be worth re assessing the risks. Top work as always though 👍

@korona3103 Жыл бұрын

You can see it's chipboard, there's a big chunk taken out of the top

@davidfaraday7963 Жыл бұрын

I've got a Stanley hand drill exactly the same as that one and use it a lot - not for masonry work though!

@biaelectric9066 Жыл бұрын

Excellent work as ever and a really interesting video. How do you find such great staff that are so onboard with you?

@mattpuddicombe7172 Жыл бұрын

My NICEIC man goes absolutely nuts if the cover come off the consumer unit without it being isolated. Especially with a bare bus bar!! Great vid as always team.

@marcusmaximus451 Жыл бұрын

Superb job chaps 😀👍☀️

@ForTheBirbs Жыл бұрын

Nicely done chaps! Baby powder is old school dry lube for cable pulling...

@ELECTRICLIFE4U Жыл бұрын

👍👍👍👍👍A very successful video and the same work. Professionals and often funny, a successful combination.

@artisanelectrics Жыл бұрын

Thank you very much

@kierantvyoutube3591 Жыл бұрын

2.42 that British general double socket shows it all from the quality of care to install that tat

@segelburgess2136 Жыл бұрын

Awesome job on cleaning up the panel. You really don't see people doing this sort of stuff these days.

@johncorbett1130 Жыл бұрын

Could be something to do with being recorded and promoting the company!!

@rjkelectrical6086 Жыл бұрын

He has worked too much with Cory to give that rating of your board. Cory’s board are decent 😂😂Your team are a inspiration to the electrical industry. If people strive to your standards it will make it much better industry.

@omardude39 Жыл бұрын

This customer is absolutely diamond for making those bacon sandwiches, what a way to look after you!!

@Mike_5 Жыл бұрын

Maintaining the Structural Integrity of the property is probably more important than speed ...

@Cablesmith Жыл бұрын

Nice tip with the rubber mallet 👌🏼

@Kallenator1988 Жыл бұрын

A Raspberry Pi inside the EVSE? Well... that's certainly not overkill!

@Jacob-er7cl Жыл бұрын

must be raking it in having ur lads believe its a challenge to do it as quick as possible LMAO

@RichardArblaster Жыл бұрын

Great job guys 😎

@peterfeatherstone8997 Жыл бұрын

Can't come to Canvey and not have an ice cream, great video as always

@stevenmurphy3639 Жыл бұрын

A bit slack with the busbar jordan! Can tell you have been in the office for a while! 🤣

@Palmiped09 Жыл бұрын

HM brown sauce is just a rebranded HP brown sauce especially for the Queens Jubilee, same sauce recipe.

@edwardsmith4101 Жыл бұрын

What a difference in the board, wish you were working down my way 👍

@artisanelectrics Жыл бұрын

Hope you guys are ready for Thursday it’s going to be emotional 😭 #endofanera

@JHayesAVFC Жыл бұрын

If its Cory leaving then we riot!

@camperchris Жыл бұрын

Stop trolling us

@jessejackson4690 Жыл бұрын

You’ve got to expect a low rating when Rueben has been working with Cory and Lee so much. 😆

@barrypritchard2306 Жыл бұрын

That was good to see how all of you work together keep it up I cannot wait for the next video 👍👍👍👍👍

@artisanelectrics Жыл бұрын

Thanks 👍

@carlmarquardt994 Жыл бұрын

@@artisanelectrics is that black gland in the board on an SWA? The feed to the charger I mean? You are leaving the steel wire outer unearthed. Aussie spark here. I'm over in .uk now...still learning and just wondering as I have thought about doing that myself.

@alantorrance6153 Жыл бұрын

That Stanley Hand-Drill. I was given one of those 63 years ago for my 13th birthday, and I still have it, but have not used it for quite a long time.

@cj-rb8fz Жыл бұрын

Going on about poor workmanship from previous electrician but Cable ran at ground level and holes drilled low level where water could soak into brick work then just cover cable to a bit of gravel and then leaves bonding clamp in main incomer and doesn’t inform dno about it , works on live board drilling and poking fingers inside board 😬

@mark_just_mark Жыл бұрын

Got to agree with other comments, what a great video, really enjoyed this one...

@izalman Жыл бұрын

Nice bit of Squiid on the time lapse

@colincameron6263 Жыл бұрын

Even though it is dry i believe baby powder is a very good lubricant for certain applications like pulling one thing over the other.

@GuyChapman Ай бұрын

My pet hate: modules that don’t make it obvious if the bus isn’t properly entered.

@eddieMurphy11111 Жыл бұрын

Hp used to stand for Houses of Parliament now it is His majesty

@markhannan5167 Жыл бұрын

Nice job as always guys

@artisanelectrics Жыл бұрын

Thanks for watching

@bikerchrisukk Жыл бұрын

I'd have liked to go through the step if it was narrow, but it weren't. Just a thought, router a channel into the brick step might have looked good?

@scotspie501douglas7 Жыл бұрын

love how your OCD kicks in true tradesman well done

@justinvickers1029 Жыл бұрын

Raw plug tool was used million years ago :) also use a 1m long 25mm sds through the step, 10mm first :)

@imark7777777 Жыл бұрын

This video had a nice format.

@alantorrance6153 Жыл бұрын

Powder is good for helping put gloves on. With powder on the skin, the hands slip easier into the gloves! Especially useful with thin rubber/latex gloves when doing dishes!