Skid Plate, Crash Bars, New Tires, and MORE: Honda Transalp 750 Mods Install

Рет қаралды 35,694

7 ай бұрын

I'm very excited to finally get some protection on this Honda Transalp 750. Today, we're adding a skid plate, crash bars, handguards, new tires, headlight guard, kickstand foot enlarger, pannier racks, and more to my brand new 2024 Honda Transalp 750. These Transalp 750 mods will completely transform the bike from mild-mannered pavement princess into a true off road adventure and adventure touring machine.
Honda Transalp 750 Mods List (so far):
(affiliate links where possible)
Hepco and Becker Transalp 750 Tank Guard: www.motomachines.com/hepco-be...
Hepco and Becker Transalp 750 Engine Guards: www.motomachines.com/hepco-be...
Hepco and Becker Transalp 750 Skid Plate: www.motomachines.com/hepco-be...
Hepco and Becker Side Stand Enlargement: www.motomachines.com/hepco-be...
Hepco and Becker Pannier Racks for Honda Transalp 750: www.motomachines.com/hepco-be...
Hepco and Becker Engine Guard Mounting Adapter: www.motomachines.com/hepco-be...
Hepco and Becker Headlight Guard for XL750 Transalp: www.motomachines.com/hepco-be...
Hepco and Becker Side Protection Plates for XL750: www.motomachines.com/hepco-be...
Hepco and Becker Handguards: www.motomachines.com/hepco-be...
Doubletake Adventure Mirrors: bit.ly/3F1lxkT
Dunlop Trailmax Raid Front Tire: www.rockymountainatvmc.com/ti...
Dunlop Trailmax Raid Rear Tire: www.rockymountainatvmc.com/ti...
SUBSCRIBE for more adventures, how-tos, gear reviews, and moto shenanigans!
bit.ly/dorkintheroad
Check out www.dorkintheroad.com for all your dorky motorcycling needs!
Want early access to videos and other perks? Become a channel member: / @dorkintheroad
Merch Store: teespring.com/stores/dork-in-...
Instagram: / adorkintheroad
TikTok: / dorkintheroad
Support me on Patreon: www.patreon.com/user?u=26709234
Want to support the channel when you buy your dual sport or ADV gear and mods? Please consider using these affiliate links:
Rocky Mountain ATV/MC: bit.ly/3tYzpXq
Amazon: amzn.to/3aDkk4z
Revzilla: imp.i104546.net/4eMdJZ
MotoCamp Nerd: motocampnerd.com/?ref=dork
Giant Loop: www.giantloopmoto.com/?ref=dork
Save 20% on Gaia GPS Premium with this link: www.gaiagps.com/discounts/?fp...
Dork in the Road’s Riding Gear Picks on RMATV/MC: bit.ly/3t8fgOC
Dork in the Road’s Dual Sport Mods on RMATV/MC: bit.ly/3yzVuws
Dork in the Road’s Adventure Bike Mods on RMATV/MC: bit.ly/3zGFHxg
Select music courtesy of Epidemic Sound. Use this link to get a free 30-day trial: www.epidemicsound.com/referra...
Camera Gear:
Insta360 One RS: www.insta360.com/sal/one_rs?i...
Insta360 X3: www.insta360.com/sal/x3?insrc...
Insta 360 One RS Mic Adapter: store.insta360.com/accessory?...
Insta 360 Motorcycle Kit: store.insta360.com/accessory?...
Insta360 Extended Edition Selfie Stick: store.insta360.com/accessory?...
Thank you for supporting the channel by clicking on the affiliate links in this description.
Disclaimer for reasons: I am not a professional journalist, expert motorcycle rider, or a mechanic. These videos are for entertainment purposes and represent my personal opinions and experiences. I'm just a dude who isn't even good at riding or making videos, so be smart and don't risk life or limb trying to follow my example or advice.

Пікірлер: 224

@DorkintheRoad 7 ай бұрын

Honda Transalp 750 Mods List (so far): (affiliate links where possible) Hepco and Becker Transalp 750 Tank Guard: www.motomachines.com/hepco-becker-tank-guard-honda-xl750-transalp-2024 Hepco and Becker Transalp 750 Engine Guards: www.motomachines.com/hepco-becker-engine-guard-honda-xl750-transalp-2024 Hepco and Becker Transalp 750 Skid Plate: www.motomachines.com/hepco-becker-engine-skid-plate-honda-xl750-transalp-2024 Hepco and Becker Side Stand Enlargement: www.motomachines.com/hepco-becker-side-stand-enlargement-honda-xl750-transalp-2024 Hepco and Becker Pannier Racks for Honda Transalp 750: www.motomachines.com/hepco-becker-side-carrier-honda-xl750-transalp-2024 Hepco and Becker Engine Guard Mounting Adapter: www.motomachines.com/hepco-becker-engine-guard-mounting-adapter-set-honda-xl750-transalp-2024 Hepco and Becker Headlight Guard for XL750 Transalp: www.motomachines.com/hepco-becker-headlight-guard-honda-xl750-transalp-2024 Hepco and Becker Side Protection Plates for XL750: www.motomachines.com/hepco-becker-side-protection-plates-for-engine-guard-honda-xl750-transalp-2024 Hepco and Becker Handguards: www.motomachines.com/hepco-becker-handlebar-guards-honda-xl750-transalp-2024 Doubletake Adventure Mirrors: bit.ly/3F1lxkT Dunlop Trailmax Raid Front Tire: www.rockymountainatvmc.com/tires-and-wheels/dunlop-trailmax-raid-front-motorcycle-tire-p Dunlop Trailmax Raid Rear Tire: www.rockymountainatvmc.com/tires-and-wheels/dunlop-trailmax-raid-rear-motorcycle-tire-p

@mechcavandy986 7 ай бұрын

Did you forget the tuner? I want one that has the European tune.

@NunyaBusiness... 6 ай бұрын

I so appreciate you including the struggles. So many "professionals" out there do super quick and clean video cuts on stuff to make it look easy. Then when a noob like me gets into it we think we are screwing everything up because it takes 5 times as long and I'm dirty, tired, and swearing at inanimate objects. You show that it's doable, but you don't sugar coat it like it's going to be second nature if you haven't done it a million times. Your authenticity is appreciated, Sir!

@jeckjeck6943 6 ай бұрын

I 100% agree.

@robluce6334 7 ай бұрын

Dude, most of us aren't "mechanics". But, turning wrenches can be cathartic. I don't know of a real mechanic that hasn't busted out the hammer from time to time.

@hamfixer 7 ай бұрын

As a mechanic I’d never be without my nylon mallet!

@Watchinchemtrailz 7 ай бұрын

Dead blow is my go to

@AbdurrahmanZedSaeed 7 ай бұрын

What is cathartic?

@Kevinhobbytime 6 ай бұрын

I have a fleet mechanic that only uses hammers lol. Headlight out? Hammer. Tailight out? Hammer. Guy is a nutcase.

@nickabrahall1412 7 ай бұрын

I can definitely relate to talking to your bike while working on it like you’re defeating an arch enemy😂😂😂

@jameslee5428 7 ай бұрын

Real deal, uncut, unrehearsed, turning wrenches, installing mods listening to music. Great video. Really cool to See the Dog sitting on the trashcan then barking in the background. Keeping it real. Anyways really enjoyed it. Be safe out there and enjoy life to the fullest.

@howardbarker7768 7 ай бұрын

Nice to see how a normal guy fumbles his way through the job putting the aftermarket parts together. It’s about how 99% of us do it and it does take effort we’ll done. Watching you from down under in New Zealander cheers

@user-cv9my1jq2r 7 ай бұрын

I thought I was crazy cussing and talking to myself while working on that stuff…… I might still be but I’m in good company haha. Thanks for the video.

@MericanAdventures 7 ай бұрын

7 1/2 inches impressive, "That's What She Said"! LOL😂

@PNW-ADV 7 ай бұрын

"Don't know, bout' to kick this bike off the stand" ...."Fun so far!" ----Hahahaha. I've been there.

@tommykawasaki9676 7 ай бұрын

Now the bike looks fit & proper. As far as skid plate clearance, I would sure rather loose a half inch & have the protection. Love it ! I can feel my grip on the Versys loosening, with each video you post.

@steveh545 7 ай бұрын

ok, this was different... but super cool. Good job Ben, and a nod to your sponsors!

@jjohnson6252 7 ай бұрын

Watching you work is so funny! It's almost like watching a video of myself/ you just need a grinder and a sledgehammer, then we'd be twins!

@mullins6429 7 ай бұрын

Nice video Ben, don’t be so hard on yourself. I’ve had trouble with fitting every set of crash bars I have ever put on. Transalp is looking pretty cool. The tyres will be interesting, other videos I have watched about these tyres are reporting the front washing out in sand. I haven’t seen them on a Transalp yet though . 👍🇦🇺

@billcove 2 ай бұрын

Re H&B Adaptor Plates: I had the same issue with the threads. But thanks to your video I checked and fixed the problem before mounting. I measured the original hole diameters; they were 7mm and should have been 8mm (for the M8 bolts). I used a M8 x 1.25 tap set and it removed a lot metal in the process; so it wasn't just a matter of paint. H&B inadvertently had tapped the holes the wrong spec. After my re-tapping, the H&B-supplied M8 bolts screwed in without problem. Really appreciate your videos. Entertaining and, for the installs, you save us a lot of frustration! Much thanks.

@mrmbr 7 ай бұрын

Lol watching your vid on my TV.... our voices must be similar. My entire house went playing 3 days grace. Dude 😂🤘it was LOUD!

@MikeBentley-wm9qo 7 ай бұрын

Nicely done Ben. It’s not a satisfying experience without some cussing and busted knuckles!😅

@wereeves 7 ай бұрын

Great video - you showcase what can be done by the "average joe" in the garage; things don't aways go smoothly or perfectly the first go, and it's important to know when to step away for a minute!! Good Job, please keep it up!!

@loganurquhart11 7 ай бұрын

Things never go as planned Lol

@wherewithalmoto 7 ай бұрын

Sweet mad max build! Can't wait to see how it does off road with the new tires and protection!

@JWDesert 7 ай бұрын

LMAO Starbuck chilling on top of that trash can is awesome hahaha

@JCrozier1 7 ай бұрын

I had to use a tap on my last project. worked out very nicely. i can certainly agree that it is sometimes good to walk away and come back when frustrated. The mods look great.

@loganurquhart11 7 ай бұрын

Man you have to be getting pretty good with setting up mods on bikes by now.

@Charlie_He 7 ай бұрын

Really enjoyed watching all these good efforts ❤❤

@netterjeff4013 7 ай бұрын

It’s looking a lot like my AT! Got mine in 2020 and probably would have gone with a TA had they been available then. I’ve since become very in-tune with my AT and, despite its weight, take it places most fellers would not. Love your work brother!

@davidskaggs9914 3 ай бұрын

Thanks for the how to video. I just bought Transalp today and will be doing the skid plate crash guards and handguards. Will order givi rack system because I already have the bags on another bike

@JohnDoe-bw7bq 7 ай бұрын

Cool video... The bike looks sweet with the new add ons...

@MotoVania 7 ай бұрын

Way to “walk away” when you’re frustrated. 😂

@offroadagain 7 ай бұрын

Looks good! Looking forward to see it off road.

@kylehamilton7952 7 ай бұрын

Great stuff brother

@mrbjay5443 7 ай бұрын

I got to admit it's fun putting in new equipment on our bike. Great idea w/ the zip ties!

@GrizzlyDaddams 7 ай бұрын

Look fkn great, duder. 🤘

@chrisobrien1117 7 ай бұрын

I placed a big order with Moto Machines for my Transalp based on this video and wrote them to give your channel credit. Hopefully this helps you continue to make awesome content brother.

@matthew3136 7 ай бұрын

H&B is good stuff. It looks pretty dang solid.

@joetheagent 7 ай бұрын

Can't wait to see it go do stuff now! Transalp lookin' pretty sweet

@marylandflyer 7 ай бұрын

I suggest "Dynamat" on the skid plate to stop noises and harmonics that come from the plates and are so annoying. Sheet is available from the big "A".

@LenaScott-numoto1 7 ай бұрын

Awesome mod video!! Very cool! Love the pit crew support also, Chewy & Starbuck! 😂

@jkmayhem 7 ай бұрын

Cool vids. It is funny to see your take on it now compared to when it was teased. Goes to show that a bike can be insanely different from what it seems to be on paper. I love mine. Currently doing suspension upgrades on mine. Had it since june.

@MotoMachines 7 ай бұрын

Great content as always!

@RealHooksy 7 ай бұрын

Nice work dork 😎

@atticushexcel9567 7 ай бұрын

Just excellent quality content DITR.

@djangowoods3866 7 ай бұрын

Nicely done! I definitely relate to the “let’s step away from this” moments. Your ears will thank you for doing away with those terrible stock tires…please let us know what you think of the raids!

@fixedG 7 ай бұрын

I know you don't necessarily feel super comfortable sharing your frustrations, mistakes and uncertainties that come from not being a mechanic but that's relatable for me, and probably most of us.

@DuffersMcDuff 7 ай бұрын

Really enjoyed this video.... I can totally relate to everything that happened here. It was funny too. "...Thereby ruining the livelyhood that provides for her" Brilliant!. Nice to see what the Transalp can be. Seriously considering upgrading from my V-Strom 650 to a TA. The H&B stuff looks mint...although we have a few other options here in the UK. Its nice to see "Not a Mechanic" wrenching on the bike and the frustrations it can cause.. I have had many experiances like that with both my MTB and Motorbike. Great content and glad to be a subscriber!

@mt1885 7 ай бұрын

Really like the New Transalp but would want it in White/Blue with Gold wheels. Really LOVE the new Transalp wonder if other colors will be available?? GREAT VIDEO!!!

@2WheelFreak 7 ай бұрын

I had the same issue with the adapter plates!!!! I figured it was because there was paint in the threads. I forced the bolts from the engine guards in to ‘clear’ the threads then used the longer bolts from the tank guards, but they were super tight! Quite a tricky install..

@tradewinds2121 4 ай бұрын

Same issue with the adapter plates here in my garage!

@ericsweetadventure 7 ай бұрын

You've developed mad wrenching skills dude!

@Homdaactual 7 ай бұрын

I bought my transalp a little over two weeks ago now, based on yours and big rock motos videos up to that point. And I absolutely love it. Despite it needing some work to make it off roadable. I mostly use it as a commuter so its not that big of a problem for me right now. Thanks for all of the info you’ve shared! Oh and I also have the OEM tall windshield, windshield extenders, fairing block offs, 12v plug, heated grips coming. Soon if anybody wants to know how those pan out

@DorkintheRoad 7 ай бұрын

Where did you find the 12v plug? I'm hoping to get the OEM one

@thatoneguy2756 7 ай бұрын

@@DorkintheRoadthat hardware included with those h@b guards was garbage.

@easyfromtnbtw3555 7 ай бұрын

You know that little trap door on the back of your lift is for dropping the back tire when you take it off

@michaeldavison430 7 ай бұрын

Have had that same harbor freight lift since 2005, excellent tool.

@DorkintheRoad 7 ай бұрын

Pretty happy with it so far.

@rjfreimuth 7 ай бұрын

LOL at Starbuck randomly sitting on the trash can.

@DorkintheRoad 7 ай бұрын

I was hoping people would pick up on that

@americaunboxed1449 7 ай бұрын

7 1/2" Is impressive 😂

@jjnnbns 2 ай бұрын

@9:35 Dr Horrible reference… thank you!!

@Splooj69 7 ай бұрын

Dude! Thanks so much for setting my Echo Dot off! Three Days Grace is now in rotation on my Spotify 😂😂😂😂😂

@yubtypin 7 ай бұрын

Nice mods. Good luck with the dog.

@Sherry-jx9hs 7 ай бұрын

I was thinking wrong bolt thread pitch (yes it's a thing) when you said made in Germany. MM bolts are weird there are multiple thread pitches not like SAE standard or fine threads. Too easy. Looking forward to you pounding down the BDR and bottoming out :)

@alainmichaud6747 7 ай бұрын

Great Job , Nice to see all the work you do ... that what Utube is for , to show us what not to do ....... Hawsome bike set up . Alain & Yellow

@knappdaddy 7 ай бұрын

I would be more than happy to have the 7 1/2” :) Good job looks great !

@human1513 4 ай бұрын

I bought the Honda Shop Repair Manual & torque specs are: Rear axle: 74 ft- lbs. Front axle: 48 ft-lbs.. Front axle pinch bolts: 16 ft-lbs.. Do the left side 1st. I finally received my Hepco skidplate, lower crash bar & rear brackets. I also had to run a 8mm × 1.25 tap through the tapped holes on the 2 brackets & the 1 on the lower part of both lower crash bars. It was only paint on the female threads that the tap was required to removed. Then it was perfect.

@RaptorPackAdventures 7 ай бұрын

Outstanding. Let me know when you’re going to sell this one 😆

@antoniorengifo1447 Ай бұрын

Great job 👊☀️

@mxdkfpsq 4 ай бұрын

Very helpful video for Hepco & Becker. In particular for the need of adapter for tank guard and engine guard. Even Hepco & Becker authorised dealer not sure about…

@tremorflow3614 Ай бұрын

Nice! Man it was confusing to understand if the adaptors were needed or not. They were for me as you. Also damn threads were an issue also and I had to tap them too. Great work H&B

@rodneyaiken1742 7 ай бұрын

👍👍2 thumbs up. Next up grade you need to go for is some LED lights in the garage. It's so much nicer working on stuff when it's well lit.

@JAES1 7 ай бұрын

moto-machines, great resource and customer service (wish they had Kineo wheels). I've had a few of those taps to clean out with great success. great walk through on those upgrades\;]

@user-yn5gm8st6d 2 ай бұрын

I really enjoy your channel as I am a dual sport/adventure bike rider. Love to watch you install all the various goodies on your bikes. If you don't mind when you have time would you please make a video or two on motorcycle chains, the good, bad and ugly. Also, a video on choosing a new sprocket with more or less teeth. I really like your honesty when comparing parts, putting them on wrong, etc. So many sites are just full of BS! The author usually could not put a screw into a piece of wood with a hammer. Ride safe!

@DorkintheRoad 2 ай бұрын

Yeah I know almost nothing about chains so I'm maybe not the guy to make that one.

@user-yn5gm8st6d 2 ай бұрын

@@DorkintheRoad Sorry to hear that. Thanks for the quick answer.

@mattsloop2736 7 ай бұрын

The crash bars might look good red. If you could match the red on the tank.

@wandersofp 7 ай бұрын

I guess its a little late now but I would be curious as a little weight break down with the protection items. I like the lower bars vs the entire setup if they are functionally effective.. I'd consider case covers if they make any for this bike.

@scottsmith1897 7 ай бұрын

Love it as you keep saying not a mechanic.......

@DorkintheRoad 7 ай бұрын

I got lucky and was actually able to fix my mistake this time, lol

@bigdave6194 7 ай бұрын

Gotta admit I wasnt too enthused with the bike at first. Now that its tricked out....very good looking bike.

@markchoitz443 7 ай бұрын

Looks good, you convinced me to pay someone to put mine on (when they ever get here). Any progress on auxiliary lighting? Thanks for the install.

@ElgatoUnamused 7 ай бұрын

Most Excellent !

@jege41 5 ай бұрын

Good Vid, yes the not included adapter plates was the why I decided to get the Heed crash bars instead, it's like yeah I really like the HB but I don't like to be nickeled and dimed on something that already has a premium price, and the Heed offer more protection but just ain't as pretty as the HB.

@jasonsibbring9630 7 ай бұрын

The mods look great. I look forward to more rigorous off road testing. If you're good maybe Santa will bring you a breaker bar 😂

@Hooky_68 5 ай бұрын

Thanks for the video tutorial. 👍🏼 I installed Hepco and Becker tank guards on my Transalp two weeks ago (I’m in Australia) and had your problem with the threads in the adaptor plates. I’m a toolmaker by trade so had the necessary tap and tap wrench on hand to run through the existing threads. Definitely took steel out but not sure what the problem was as I didn’t think to check the existing holes. My thoughts are the existing threads could have been tapped with a fine thread and not a course thread to match the screws. M8x1.0 pitch instead of M8x1.25 pitch. Btw, enjoying your Transalp videos and tutorials, entertaining and helpful. 🍻

@Handirifle 7 ай бұрын

Frankly kinda glad to see ya struggle with those tires. I thought I was doing something wrong changing the tires on my Harley touring bike.

@paulsmith39 7 ай бұрын

Ive really enjoyed all your videos and you have helped me save some money on protective gear ie boots, jacket and pants. Did you have to adjust your gear shift lever to fit your riding boots? If so could you do a video on that please.

@erichalker6667 7 ай бұрын

Now you need a cool sounding exhaust! I have seen a few that sound good.

@woundedtiger7547 7 ай бұрын

One of those wham bam thank you ma'am. An 2wks later 😮😅😊

@JeffreysGrabItAndGrowl 7 ай бұрын

Man, you are 😂 entertaining!!! 😅

@Luk4s7St 7 ай бұрын

I have same set of protective bars on my TA and all fit perfectly. I suppose you’ve been just affected by a small production error.

@timjones1236 7 ай бұрын

I had to tap out the adapter plate M8 bolt holes as well. Powder coating stop the thread.

@ne-adv 7 ай бұрын

Yer the perfect wrenching buddy, IF, and this is a big IF, you have a frig in the shop full of beer AND a couch to sleep it off on. Three consecutive days is excessive, as some are not fortunate enough not to have other day jobs we have to do. But two consecutive weekends is okay... though, would rather ride than wrench. The way it works here, I have all the tools you could need (minus a pretty bike lift) and the frig, others bring the beer and the bike. But one should do ALL work (at least the first time) with the tools you personally carry.

@ne-adv 7 ай бұрын

Personally, I use a magic marker and write the torque values right on the part, so no need to look up while on trail (Yes, I have a cheap, tiny, torque box in my kit.).

@user-hj5ml8rr8u 7 ай бұрын

for not being a mechanic, you did a great job on those tires! ...i cannot even do that!

@DorkintheRoad 7 ай бұрын

Well I cut out a lot of the fumbling and cussing.

@user-hj5ml8rr8u 7 ай бұрын

never mind my busted knuckles ..and yours..?..@@DorkintheRoad

@walterconn5637 6 ай бұрын

Wow, Christmas came early

@retiredbiker 7 ай бұрын

Thanks for Playng three Days Grace on MY Alexa and I love the conversation you had with the tires. LMAO. Always entertaining.

@DorkintheRoad 7 ай бұрын

LOL I sort of left that in to see if it would set off anyone else's device. It's like 3D video!

@brianfackrell4139 7 ай бұрын

Ya got mine going. I'm an old man, confused and had no idea what was going on. The wife explained it to me.

@bobo1793 7 ай бұрын

Awesome stuff man. I find it odd that they didn't bring the other color options to the US, I had to go with OEM since all the blacks would have looked atrocious and out of place on the Ross White, but hey, yay my wallet right? Still having a hard time deciding on pannier racks, and if that headlight protector is REALLY worth it (I have the wind fairings OEM and they're fn amazing, really cuts wind off your arms and shoulders, BUT my bike whistles now lol) I might have to go with outback since they're the only ones that fit lonerider (afaik) and I wanna try out their stuff. What's your thoughts :)

@bigbird2464 7 ай бұрын

I've pretty much got all the same parts as you, unfortunately my broke ass doesnt have the tools atm so I'm gonna have to palm it off to the mechanic to do up for me but goddamn if it doesnt look good, Hepco and Becker definitely have the best crash bards and skid plate IMO

@anthonycoffey6565 7 ай бұрын

I'm not a professional mechanic but I grew up helping my dad work on all kinds of hot rods & stuff, I can definitely say it seems that nothing these days seem to want to fit together & work like they're supposed to anymore 😅

@allenlloyd2662 6 ай бұрын

hi from the UK ,been looking to get a 750 had a 650 and two 700's . in the UK we get a colour choice but the more i see it the more i like it totally blacked out like yours ( also my 650 transalp was black and wish id never sold it ) do the hepco hand guards have covers ? enjoy the trany

@dstubby82 7 ай бұрын

0:01 "This baby right here..." *obligated slap of product* 😁

@DorkintheRoad 7 ай бұрын

LOL 100 percent

@mikogarage 7 ай бұрын

Even here in Indonesia after seeing your video we have to tap the adaptor also

@GM_Rider_ 7 ай бұрын

Was the rim paint ok after using the metal levers?

@markdick8436 7 ай бұрын

Hey man what is the model Klim jacket you’re wearing? Plus luvin the channel from sunny Nz

@raymondmuzic4520 4 ай бұрын

Tap: M8-1.25. I also had to clean up the threads but only on one side.

@michaelkrenzer3296 7 ай бұрын

Saddly, I had a similar issue with the SW Motec crash bars for my Triumph Tiger 660. The instructions were incorrect (even read them in the native German to see if it was a translation error) also leading to having to modify a spacer as it was 5 mm too thick. Contacted SWM USA and they were appologetic but gave no indication they were fixing it in the kit or the instructions. Not my prior experience with them but also never ordered something from the actual US branch (did not exist in the past).

@lukebarber7598 7 ай бұрын

Please tell me your pug is named after the pug from the Iron Druid chronicles??? If not disregard. Great install. I don’t know any one that hasn’t wanted to kick a bike off the stand from time to time lol!😊

@brianfackrell4139 7 ай бұрын

My new internet 'not a mechanic riding buddy'.

@SwampGeezer 7 ай бұрын

Love seeing someone with about my skill level managing work that seems intimidating, thanks for this video. A quick search didn't produce any results of you reviewing the Rabaconda changer - and no affiliate link?. Would love to hear what you have to say about it. I've been trying to decide whether to pull the trigger on one and it would be great to see a review from a trusted source.

@DorkintheRoad 7 ай бұрын

First time I've used it. I just got it a couple weeks ago because I was dreading this process so figured it was worth a shot. It's definitely handy but jury is still out on if it's worth the price.

@allanmcdonald4500 7 ай бұрын

I see the dog was standing guard on the recycle bin. Stunt dog for sure. See you at the Desert 100

@sonnys8535 7 ай бұрын

I've got the same plate coming but this is the first time I've seen the mounting bolts on the bottom of the plate. Not cool, especially being as the plate has to be removed to change the oil. They will also grab a tree rather than slide Hmmmmm. A few other's reccess the bolts, even if it means losing more clearance. We'll see. Maybe I'll make 1/4" plate sliders with countersunk bolts to replace those. Touratech has that setup