Stationeers: Phase Change Heating in Europa

Рет қаралды 2,659

Күн бұрын

This video I make a phase change heating device. My personal restrictions is to use T1 Pipe Bender only items. This means no counterflow heat exchangers and no medium radiators. Looking back, while this is doable, it does require quite a high amount of material cost since I use lots of piping to fill up my phase change device loops.
0:00 Intro
1:00-5:10 Building 1st stage: Oxygen condenser
6:10-16:00 Building 2nd Stage: the Volatile Phase Change Device Loop
14:45 Filling the Volatile Phase Change Device Loop
17:30 2nd Stage active
19:05-33:00 Building the 3rd Stage: 1st Pollutant Phase Change Device Loop
20:24 Food/water Break 1: Fixing the Liquid pipes at the Oxygen Condenser
22:15 Resuming building the 3rd stage
28:00 Filling the Pollutant Phase Change Loop
33:40-38:40 Storm happens
39:12 Food/water Break 2: Printed another phase change device
40:25-53:00 Building the Final Stage: 2nd Pollutant Phase Change Loop
48:50-Filling the 2nd Pollutant Phase Change Loop
53:00 Fully built, Heating tests and some fixes.
54:20-59:30 Heating Test 1, 5 min from -150 to 4C
59:40 Food/water Break 3
1:00:00-1:04:00 Heating Test 2, improving the 4th pollutant loop
1:04:15- 1:11:45 Heating Test 3, 6 min 30 s from -140C to 20C

Пікірлер: 14

@smeghead0 21 күн бұрын

for the initial coolant system, i used a memory chip and logic writer to change the active vent to 6Mp don't have to worry about overpressure or liquid issues.

@shadowdrake082 20 күн бұрын

Is that for the oxygen compressor? I think at this time i strangely enough have yet to really use chips in greater detail, it wasnt until Vulcan that i started building a few for some small settings like this.

@smeghead0 19 күн бұрын

@@shadowdrake082 Yes! in the first stage as shown in the thumbnail. i still had to use a drain and cowl for the liquid waste tho. but the chips do well to stop them growning. i found i had to flick the vent to inward and turn it on first then turn the chip on to overide the vent to 6mp. so long as the vent's settings don't change it "should" stay the same. Updates to the game not withstanding so you should be able to just overide once then remove the chips, i keep them just incase.

@lesNous54 4 ай бұрын

very instructive keep it up !

@fuse98 4 ай бұрын

I'm going to be brave today and try and breathe and eat outside, it's currently 0 Celsius. Jokes aside, I'm enjoying your videos. Vulcan next?

@shadowdrake082 4 ай бұрын

Will give it a try, i have an earlier save before i fully set up my system. Just a matter of if i want to limit myself to T1 and keep doing what i have been or just go T2 since vulcan is easier to go T2 if you can get lucky with rng to get some oxites.

@fuse98 4 ай бұрын

@@shadowdrake082 Ya, the Traders need some tweaking, it's the only thing I sometimes will bypass in a save altering starting materials, such as 1 ferrn seed and 1 potato seed and if you screw up well you're back to having to roll the dice on traders. Also, it's nice I'm not the only one who prefers to experiment in Survival mode rather than Creative.

@axeleverttv 3 ай бұрын

Rather than using the system you had to vent the liquid from the input, why not just put passive liquid vents on them?

@shadowdrake082 3 ай бұрын

I have done this before, passive liquid vents are throttled based on how much evaporates in the pipe volume and then has to equalize with atmosphere. I haven't messed around too much but I found for some reason the pipe cowl and utlility gas pipe has handled an extreme load better than several passive liquid inlets.My belief is that passive liquid inlets trap and keep liquids in the pipe but let air freely mix whereas pipe cowls will equalize everything, including liquids with the atmosphere.

@GokouZWAR 3 ай бұрын

Just so you know, this video is not watchable in discord. You have it in stationeers discord but you have it disabled here in youtube so it forces people to come here instead of watching it on discord directly. You'll lose views that way for people who don't want to click the button. You'll need to enable the ability for this video to play in other platforms if you want those views.

@shadowdrake082 3 ай бұрын

Hopefully I fixed it. I had to dive into the settings and see what box I unchecked that I shouldnt have.