No video
Subispeed - 2015 WRX & STI Pitch Stop Mount Install
Рет қаралды 53,373
Күн бұрынFind out More: www.subispeed....
------
Follow along as Kevin goes through the install process of a new pitch stop mount on our 2015 Subaru WRX!
Torque specs:
Engine - Pitch Stop Mount = 37 ft-lbs
Firewall - Pitch Stop Mount = 43 ft-lbs
------
Snapchat - Subispeeddotcom
Twitter - / subispeeddotcom
Instagram - / subispeed
Facebook - / subispeed
@MrSKlim 8 жыл бұрын
Wow. Wish I wasn't such an idiot. Should have looked up where pitch stop mount was located. I JUST did TGV and EGR delete. Had a Perrin pitch stop on hand. Didn't install. Till today....as I look at this video in tears.
@daveprobert2168 6 жыл бұрын
Cheers for the vid, just did mine this afternoon. Was concerned that I may need to support the engine somehow while changing the mount so put it off until now. Subscribed!
@sportsmc3 8 жыл бұрын
LOL getting my intercooler back on the car today was a nightmare. Figured out a workaround way, but I need to make that shit easier asap.
@robbiem4041 7 жыл бұрын
Will a pitch stop mount on its own cause alot of noise? Nvh?
@tellyawhatmate 6 жыл бұрын
Robert Multari Iv fitted one, not sure if Iv bent a rod or sound is just more direct as it's transferred from block to firewall via the aluminium pitch stop mount. Noise between 2-3000rpm no boost
@MD-pz3cn 6 жыл бұрын
What were the torque settings for the pitch stop's hardware? Thanks for the video.
@ecoker 8 жыл бұрын
Is it safe to install this without replacing stock motor and trans mounts?
@TheMcooper101 8 жыл бұрын
wondering the same thing
@anthonymarinacci4184 9 жыл бұрын
Love the videos, you guys are super informative. My question is, what are the benefits of removing your engine cover from day one? Would it be beneficial for a stock engine?
@SubiSpeed 9 жыл бұрын
Well for us, it's beneficial because we have easier access to the engine and don't have to take it on and off every time.
@sergiosoto6703 9 жыл бұрын
Do they make anything for the 2015 forester xt.
@17.06.Copper 5 жыл бұрын
It's the same item
@Arachnikadia 5 жыл бұрын
What are the torques for tightening the pitch stop bolts and the intercooler bolts?
@Arachnikadia 5 жыл бұрын
11.7 ft lbs for the intercooler 12mm bolts on the bracket. The other two get tightened until the rubber bushings just start to squish down.
@samirfarah640 Жыл бұрын
Thank you!
@gaivoron 8 жыл бұрын
Hows the vibrations at idle??
@DanSpengeman 9 жыл бұрын
Hey guys. I saw/read somewhere that after installing an STi pitch stop mount on their WRX, they heard a bit more road noise. Any validity to that?
@vavo4902 8 жыл бұрын
I have a Torqe Solutions one and there is a bit more noise. The improvement over stock is totally worth it though
@CodyHalterman 9 жыл бұрын
This pitch stop mount, will it vibrate the car more like a poly bushing aluminum engine mount would or what do you notice after install? is the cabin noise louder is there any vibration problems? things like that.
@OGxYSLxMCMxBBC 9 жыл бұрын
do they have anything for the 05 Legacy GT?
@cockus123 2 жыл бұрын
Did u use a 1/2 torque wrench??
@ahmer3046 9 жыл бұрын
Why do u guys have a 2015 mustang and the new m4!
@Gunsforfreedom 9 жыл бұрын
Cool. Thanks for the video
@shamwaymoonyos9578 7 жыл бұрын
Yes thanks for the video appreciate the attention to detail. I've ordered many parts from you guys. Good service, great site.
@Two-Stack 6 жыл бұрын
14mm rench, 14mm - 12 mm socket, ratchet with extension, flathead ignore this comment
@4x4forlyfe 4 жыл бұрын
Any need to add some white lithium grease to the bushings?
@chickenman7767 4 жыл бұрын
I did - just applied a thin film of grease on each side of the two bushings
@CrankyyUS 7 жыл бұрын
Would the pitch stop mount you guys sale on your website work with a 05 subaru wrx?
@marc07112 9 жыл бұрын
when are u guys going to show how to switch the trunk out for the wing?
@Capp2015 9 жыл бұрын
Why don't you guys use the ETS or Mishimoto intake from your website? I'm not going to buy anything you guys wouldn't use yourselves
@SubiSpeed 9 жыл бұрын
Right now we have not installed an intake as they are so popular they are selling out so instead of using one on our car we are trying to keep everyone else rolling with intakes shipping out the door. As soon as they become more available we will install one. :)
@unanimouslyunanimous 9 жыл бұрын
How did you take the plastic engine cover off?
@BarbWaltersMusic 9 жыл бұрын
Pull it off.
@IdontKnow-fd6rp 9 жыл бұрын
Did you really ask that???
@18magicMARKer 4 жыл бұрын
I don't understand how it's going to give you more response from the engine...if by response you mean when the engine moves or vibrate it also move the whole chassis? I think this mod is one of the worse mod ever...one you can't even see it, you can't even hear it, your car doesn't go faster...just makes your car more uncomfortable...unless you're using ur car is a track car, this is stupid.
@mrsteef7490 2 жыл бұрын
The less an engine moves around the better.
Sergio Outdoors
Рет қаралды 50 МЛН