Super Easy Set up Pressure Pot for Resin Casting!

No video

Super Easy Set up Pressure Pot for Resin Casting!

Рет қаралды 11,614

Күн бұрын

In this video, we're going to show you how to set up a pressure pot for resin casting in super easy steps. This pressure pot set up is ready for use right out of the box, so you'll be plug and play for your next resin casting project!
If you're new to resin casting, or you just need an easy way to set up your pressure pot, then check this video out! It'll show you everything you need to know to get started in no time at all!
Pressure pot for resin casting made super easy. This California Air Tools pressure pot come ready for action with no set up necessary.
5 gallon Pressure pot amzn.to/3pjbfcy
2.5 gallon Pressure pot amzn.to/3pkvLcR
8 gallon air compressor amzn.to/46eMeQx
In Line Filter amzn.to/42Trx9L

Пікірлер: 65

@WaynetheWoodturner Жыл бұрын

Great explaination Jake, a must see video for prople setting up a pressure pot

@JakeThompson Жыл бұрын

Thank you Mr. Mint

@JennsTurn Жыл бұрын

This is a great informational video on setting up the CA Air Tools pressure pot! Thanks Jake! 💙

@JakeThompson Жыл бұрын

💙💙💙💙

@roderickeslinger5949 9 ай бұрын

Indeed, very nice job Jake. ;)

@Paul-Coburn Жыл бұрын

Thanks for the video Jake. Very helpful.

@JakeThompson Жыл бұрын

Thank you Paul 🦾🦾

@jpwoodwork Жыл бұрын

Fantastic video Jake, very well explained

@JakeThompson Жыл бұрын

🦾🦾🦾

@kimberlywendt5241 Жыл бұрын

Just got one; now not scared to open it up

@JakeThompson Жыл бұрын

Sweeeet… Glad I could help

@shanehurst31 Жыл бұрын

Another very informative video thanks Jake for sharing

@JakeThompson Жыл бұрын

Thank you Shane. 🦾🦾

@WackeyWorxWorkshop Жыл бұрын

Great video Jake🎉

@JakeThompson Жыл бұрын

🦾🦾🦾

@ConnieConnie824 Жыл бұрын

Just the video I needed 😊 I freak out if my pot goes slightly over 50 lol, guess I should chill out. I've never adjusted the pop-off valve, doing that would give me more peace of mind 🥰

@JakeThompson Жыл бұрын

💜💜💜💜💜💜💜💜💜💜💜

@SteelBladeWoodworks Жыл бұрын

Great tutorial, very informative!!!

@JakeThompson Жыл бұрын

🦾🦾

@Ken.norwood2 Жыл бұрын

Thanks. I had forgotten all that

@JakeThompson Жыл бұрын

👍👍👍👍

@_zhawkeye_9808 Жыл бұрын

...really good info...thanks Jake...👍 Matt

@JakeThompson Жыл бұрын

🦾🦾🦾

@Anita-Ball Жыл бұрын

Great tutorial! I was just wondering…could you do a tutorial on how to put that mold carrier together??? Please & Thank you 🤔😬😵‍💫🫨😶😂

@JakeThompson Жыл бұрын

😂😂😂🧡🧡🧡🧡

@Anita-Ball Жыл бұрын

@@JakeThompson maybe some day…🤞🤞🤞🤞🤞

@Ken.norwood2 Жыл бұрын

Congrats 🎉🎉🎉🎉🎉

@JakeThompson Жыл бұрын

🦾🦾🦾🎉🎉🎉

@jimspaulding5385 Жыл бұрын

Outstanding video on setting up the CA Air Tools pressure pot, Jake. I am very happy you now have four in your shop! Well done. See you Saturday. 💪💪💪

@JakeThompson Жыл бұрын

Thank you Mr. Jim.. I can already see that it’s going to be a big help.

@anthonybeasley7076 8 ай бұрын

To level the floor of your chamber, you can also pour in a bit of resin and of course, let it harden. Just enough to level out to the edges.

@JakeThompson 8 ай бұрын

I am afraid if you spill resin on it, you won’t be able to clean it up.

@martinbreece Жыл бұрын

👍👍👍

@JakeThompson Жыл бұрын

🦾🦾🦾

@michaeldequatro1012 Жыл бұрын

Hey Jake. Great show last week. My new pot is coming tomorrow and I can't wait. I'll be a beginner at this so I just got the 2½ gallon pot. Just one question and I think I asked you before, but I forgot. I'll just be putting 1 or 2 small molds in at a time. Did you say keep them in about 4 hours? Thanks and I'll see you Saturday.

@JakeThompson Жыл бұрын

Thank you Michael.. if you are using Alumilite clear slow… 4 hours is the demold time.. I take mine out at least 2 hours in the pot 🦾

@michaeldequatro1012 Жыл бұрын

@@JakeThompson I ordered Total Boat High Performance. I thought measuring 2 to 1 would be easier for a beginner. Would it still be 4 hours? Thanks for getting back to me.

@JakeThompson Жыл бұрын

@@michaeldequatro1012 Somewhere on your resin will be a demold time, leave it in the pot for that long.

@michaeldequatro1012 Жыл бұрын

@@JakeThompson Thank you :)

@SleepyBears 4 ай бұрын

Thank you so much for this helpful video, I’m trying to understand what and how a pressure pot for resin works! I have a question, how is the air compressor set up? And what is that little lid pop used for?

@JakeThompson 4 ай бұрын

Here is a video on the air compressor. kzfaq.info/get/bejne/rdd5iryXmMrMo2g.htmlsi=cMExMBR4LUio4JVg the pop off valve is a safety measure to ensure you don’t over pressure the tank.

@SleepyBears 4 ай бұрын

@@JakeThompson my hero!! Thank you 🙏🏻

@JohnAlanDay 9 ай бұрын

Jake do you think the 2.5 gal cal. pressure pot is adequate and what pressure do you suggest? Thank you for all your help

@JakeThompson 9 ай бұрын

Lots of people use the 2.5 gallon and are quite happy.. I cast bigger things, so I use 5 gallon pots… on a good quality pot I go to 65 psi.. but just make sure it’s below the max rating for your pot.

@alanlabriola3810 9 ай бұрын

@Jake Thompson How do you know what psi to apply to an item?

@JakeThompson 9 ай бұрын

I just go below the maximum rating for the pot.. but I have just heard online that you need 45psi for it to get rid of the bubbles.

@Rousecraftsmen 10 ай бұрын

I'm curious how long you put your resin in to degas it? No doubt, it will depend on how much you put in at one time, but say a pint or a quart quantity?

@JakeThompson 10 ай бұрын

With Alumilite clear slow I will take most things out in 2-4 hours. Any other resin or epoxy I will leave it over night

@rodrigopadilla832 Күн бұрын

which compressor u use

@JakeThompson Күн бұрын

It’s linked in the description 👍

7 ай бұрын

I just got one from VEVOR a 2,5 gal. I cannot make it go above 30psi, my compressor pops out 😅 any suggestions?

@JakeThompson 7 ай бұрын

Do you mean the pop off valve on the pressure pot.. or your compressor poops out? Lol

7 ай бұрын

@@JakeThompson my compressor hahahaha

@JakeThompson 7 ай бұрын

@ 😂😂😂

@FALCONMINISTUDIOS 5 ай бұрын

I recently purchased this same pressure pot and I noticed when I connected my compressor the pressure gauge on the pressure pot does not move. I'm new to this and haven't been able to find any answers to this issue can you help? I would really appreciate it. I even called the company and they didn't know

@JakeThompson 5 ай бұрын

I would go to the simple stuff… can you hear air going into the tank.. does your air compressor have air in it.. ( I’ve had someone not know they had to have the compressor on and the out valve open.. Is the regulator letting air in?

@FALCONMINISTUDIOS 5 ай бұрын

@@JakeThompson hey Jake thanks for the reply. I am able to hear air going in the pot as well as my compressor pushing the air in. It's just that the gauge never moves at all so I'm not sure what I'm doing wrong. Perhaps a video explaining these steps would not only be helpful for me but for others as well. Especially anyone getting into using this tool in the future. I've looked everywhere for an answer and can't find anything explaining this which is odd.

@JakeThompson 5 ай бұрын

@@FALCONMINISTUDIOS message me on Instagram and maybe I can video chat with you

@FALCONMINISTUDIOS 5 ай бұрын

@@JakeThompson that would be perfect thank you!