Yes i know i don’t know how to open an ammo can. Great joke. You don’t have to tell me. You idiots commenting that I don’t know how to open this would not have been able to open it either. The piece of shit has been sealed for 30 fucking years.

These bullets are from POF Pakistan ordinance factory my Country's ammo lol. I am sure everyone of those is gonna go bang. The date of production is 9/19/1990. I have a lot of their 9mm 124 grain bullets. Not a single misfire in 3000+ rounds.

That's belted for an MG-3. Inert projectile means that it doesn't explode. Solid shot.

That was fun to watch! Welcome to opening a 30 year old ammo can. There are secrets to using the latch to pry it open in a few seconds, but I'll let you figure that out in your own. That's the first time I've seen the whole "inert" bullet thing. Most countries just label the can L.C.B. Lead Core Ball. To differentiate between steel core and APIT, which is not so inert. 😊

Haha the drill got me 😂

Thank you for sharing this experience. Absolutely loved the part of you banging it open 😂 ❤

The seals are designed so that you just wiggle them, and it breaks. This is done for quickness in the field. There is no need to use cutters. Thanks for sharing 👍

Aged 10 years watching you open a can.

Nice score there. Easy trick to de-link that: get a piece of a wooden dowel slightly smaller in diameter than the base of cartridge. Use that to push each round out while bending the belt backwards to open up the links. Hope that helps.

Inert projectile means the bullet itself isn't explosive. I noticed the box had an explosives sticker on it and that other sticker was probably added on later to differentiate the difference between the powder and the bullet. It also says Ball on the side of the can, so you know your dealing with typical ball ammo

And we now conclude our class on how to open an ammo box

Looks very much like standard 7.62mm NATO linked in 50 round belts for the MG-3. (Looks very similar to the old MG42 from WWII). Best LMG ever produced and with an astronomical rate of fire.

A couple years ago, I acquired two 400 round cans of 7.62 NATO that was manufactured in 1982. The cans had their original seal and were in their original crate. That 40 year old ammo shoots just fine.

A friend and I bought some Chinesium surplus, it was his first time opening a spam can. I let him struggle for a few minutes, then I showed him how. Didn't make it easier to get into it though.

Have you considered a set of screwdrivers or small pry bar ?

I have 7.62x54r rounds made in Russia in 1946, were sealed all those decades until I opened them and ive shot about 100 of them and not a single one had a problem. Ammo stored properly lasts longer than you will even live.

OMG this was amazingly funny 🤣, more, more, more😂

SCORE!!!!!! All that ammo and a brand new $100.00 feed belt for a MG42! You just don't see new 42 belts today.

Opening my WWII ammo boxes pretty much went down that same way, I feel your pain

The ammo box was stuck shut so tightly because it was about 93 degrees on the date (September 19th 1990) stamped on the box in Pakistan (POF marking) when it was packed. When it was still hot in the factory, they filled it up and sealed it. Over decades of sitting in warehouses, it was never opened to release the vacuum pressure created by the cooling of the air inside. Combine that with the rubber gasket starting to break down, vulcanize and adhere to the box, as demonstrated by the rubber still stuck on the rubber still stuck to the rim of the box, you got a perfect storm of negative force working against you. Would have been a little easier to open if you had used a hair dryer to heat up the box and by extension, the air inside. But of course that's something no normal person would think about. After all, I am a massive NNNEEEEERRRRDDDD

Are they still worth it in the aftermath? I'm looking to get some 556

I FEEL YOUR PAIN.......I'VE HAD AMMO BOXES THAT NEEDED DYNAMITE AND SWEAT,TOO.

Hahaha!!!! Somebody probably hot glued the lid shut! Lol

I was going to say the same thing from Top Gunner these look like East Asian loads and by the type of the belt that they were mounted in at 762 they should be approximately 54 mm cartridge non-rimmed! Nice little cartridge find something to shoot it in! They're actually pretty hot so watch the chamber pressure you can't guarantee the powder load a lot of old cannon powder was used in those! Nice bed

Watching you trying to open this can made me want to scream!!!

POF is Pakistani made 7.62MM ammo. They build and use the MG42/59 series of MGs - proceed with caution with any of their ammo

Love the comedy haha One gun channel to another, solid sup

Those ammo cans can be tough to open. The rubber liner seals in the negative pressure that builds up over time. I use a screw driver to open one edge enough to relieve the vacuum pressure.

As listed 9n the box it's rounds for the l2a2 aka the sterling

Inert projectiles, That just means there's no explosive in the actual projectile and it itself will not explode, however the cartridge appears unfired and still contains powdere therefore still an explosive hazard. If those were dummy rounds there should/would not be a 1.4 S sticker on it. And proper dummy rounds would be marked visibly as such.

Pakistan Ordinance Factory Ammo....Awesome. These rounds are super reliable and Hot. Good Find. 👍

Where did ya get that stuff, I wanna can :) how much for it?

I had to open the comment section and see if everybody else was cringing as hard as I was seeing him trying to incorrectly tug on that latch. He was recording a video to put on youtube, you would think someone might consider checking out KZfaq videos or reading the gun webs about opening old ammo cans.

Looks like it's on MG3 Belts

The locking latch acts as a pry tab to get the lid started open as well

It's a good thing they put bubble wrap in the box

I didn't know Plenty Of Fish manufactured bullets??? Bullsh*t yes, bullets is a new one for me. Guess it's time to jump back in!!!

Dude you worry me how your trying to open that container put it on the floor between your feet grip with them and pull up on the latch that fastens it shut !

Having been a 60 gunner that is hard to watch

man...they really make you work for the ammo.

Well, a few months have gone by. How’d the stuff shoot?

Thats what the word SEALED means.

Thanks for the upload i love seeing people open up these old surplus ammo boxes/crates also screw the dumbasses in the comments whi couldn't wait for you to open the box the munitions look great

I want my 2 minutes back.

I got 2 cans of this 10 years ago, gone now worked fine , $hittiest cans ever , still haunted by those damn cans, could be OK for chainsaw tools or fill with concrete for an anchor.

По проще чем ключем открывать советские консервы..

As it’s got L2A2 on the side, it’s could be British ammunition.

Bet you'd open faster UNDER FIRE! There is a trick, but you gotta have someone shoot at ya!

Видно, что ребята никогда не имели дело ни с оружием ни с ящиками с патронами. Крутили ручку открытия, а не догадались, что флажком надо было упереться и легко открыть.

It was worth 10 cents a round all day.

You aren’t smart enough to get in it…. You shouldn’t have it

Did the ammo work?

British for GPMG?

This guys not the brightest in the bunch!

Well apparently L2A 2 means that it's made to a higher quality Standard than your average Nato ball.....

It's for a GPMG 7.62 or an SLR

I have to correct myself 762x51 non-rimmed

Says 1/5 belt BLT on box 1 in five is a tracer

Это от MG - 3 ...судя по ленте??

Well... does it go pew ??????

I'll bet you had a hard time opening that up on Prom Night like the ammo cam

How’s you find this and where ?

A few Christmas later

You wouldn't be much use in a firefight,"MORE AMMO",no sorry left my lump hammer at home. Three or more "F's" in such a short clip must be a record.

I bought some of that years ago, it is Pakistani

Now you got a reason to get a chine gun

a box of ammunition on which there is a warning sticker caution!?, ok, let's hit it with a hammer.

POF headstamp is Pakistani ammo.

Try tannerite for opening

Fucking underdevelopment, dawn.

Its British

das ist ein ganz normaler .308 mg gurt. 308 ist 7,62 nato

L2A2 is Malaysian surplus ammo. At first I thought it's belted for some certain machine gun.

Is not an L2A2 a Brit auto rifle?

German links

Menos manualidad que un elefante!

@Rob69 you clearly dont know how to open a ammo can?! Hahahah.

That’s so ignorant opening that can like that. Snap it open, come on!

Bro there is an easier way to open without tools….

Its not British ammo the links are not British

Painful to watch..

POF Pakistan

Such language for a teenage girl lmao

NATO

Could my SKS shoot that ammo?

Não sabe abrir?!

NATO? 7.62x51 ? Name a nato country using that?

Between the vulgarity and watching you use a knife to open a seized metal box. I just don't think you should be in possession of a firearm. You're just not the shiniest apple or light bulb. And yes, your video wasted my time.

I'm so embarrassed for you. I feel sorry for folks without any military experience or knowledge of headstamps or military packaging procedures.

They sealed it was stupid glue….. Use the torch.

Somebody skipped arm day.

Que torpes!!!

Isn't it ammunition for a German mg42 sure looks like it to me.

Holy shit, bro you use Pakistani ammo? It is true that they have the best quality literally Ukraine also got a supply of artillery ammo from POF (UK bought a ton of ammo for them from Pakistan)

*.. **#LUCKY** ... YOU "NOT" ARE IN THE **#MIL** ..* ( WE ALL THEN ARE "DEAD" BY #NOW ... ) *WHO KNOWS HOW THEY "OPEN" THIS **#BOX** ..???* *TRY GOOGLE .. ( HOW TO OPEN A BOX .. WITH "NO" **#LOCKS** )* *FUNNY VIDEO ...*

Please please get some educated help