Tearing Down the Ducati Panigale V4 SP2 & Installing Beautiful CNC Aluminum!

Tearing Down the Ducati Panigale V4 SP2 & Installing Beautiful CNC Aluminum! | SP2 Series Part 7

Рет қаралды 17,679

Жыл бұрын

The Motomillion Ducati Panigale V4 SP2 was left off with dyno numbers in the last episode.
Now, we start phase 2. This is where all the carbon fiber comes into the picture and this thing really transforms into something special.
Today we are beginning the tear-down, removing all the plastic panels that will changed into carbon fiber, but before the beautiful carbon gets put back on, we will be adding gorgeous CNC machined aluminum pieces to dress it up.
We love how they pop and give the Panigale V4 SP2 a truly premium feel and look! These are the subtle mods that we love, that could be mistaken for factory pieces. It's the attention to detail!
Motocorse CNC Billet Rear Set Mount Support - bit.ly/3TYHDfu
Motocorse CNC Billet Right Side Engine Mount - bit.ly/3nEYjwj
Motocorse CNC Aluminum Kickstand - bit.ly/3lSxogi
For the highest quality parts and best service
► www.motomillion.com
Connect with us!
Instagram ► / motomillion
Tik Tok ► www.tiktok.com/t/ZTRNPrUmU/
Facebook ► / mymotomillion
Motomillion is an online motorcycle boutique, and we love what we do. It is who we are. We, just like you, are riders and avid motorcycle enthusiasts. Our goal is to present you only the highest quality products to express your individuality through your passion for motorcycles, while providing you the greatest personal online shopping experience. Our founder, Mani's passion for motorcycles is what started it all. His stories are forged with the memories of the great 500cc GP races of the 1990s and make their way to the modern day.
No matter the year, make, or model, we truly believe that every enthusiast out there deserves the best and we are here to help.
#Ducati #DucatiPanigaleV4 #PanigaleV4
© 2023 Motomillion Inc.

Пікірлер: 68

@Motomillion Жыл бұрын

What did you guys think? Are those CNC dress up pieces the way to go? Or should we have kept it black? Let us know!

@SpoolinVR Жыл бұрын

Looks amazing 💪

@Motomillion Жыл бұрын

Thank you!

@Naldo_S1K Жыл бұрын

Honestly, I would love to see that classic Ducati yellow make a comeback!

@sugarrfree Жыл бұрын

Looks 🔥 Mani

@Motomillion Жыл бұрын

@Naldo_S1K We are on the same page!

@bihbrosgaming Жыл бұрын

YOU LISTENED TO ME!!!!!!!!!!! thank you so much, i really wanted the SP2 to be full carbon

@Motomillion Жыл бұрын

Getting there!

@motokingyyc Жыл бұрын

Better than any netflix show🙌🏽💯

@Motomillion Жыл бұрын

Thank you!

@thedragonofechigo7878 Жыл бұрын

The SP2 in carbon is going to be insane. What a machine.

@Motomillion Жыл бұрын

We can't wait!

@SpoolinVR Жыл бұрын

You guys do some magic Ducati builds. Loving your videos great quality. ❤

@Motomillion Жыл бұрын

Thank you! We've got more coming up so stay tuned!

@tastorque Жыл бұрын

Small details big difference Really nice change Very nice finish of the product Love it 😊

@Motomillion Жыл бұрын

Thanks Tas!

@L31K Жыл бұрын

Definitely one of my favorite builds!!! Thank you and can’t wait to get my RS660. Hopefully you will have a bunch of products for it I’m looking for!

@vinnymorrissey7357 Жыл бұрын

I'm really enjoying the videos. Stunning CNC bits!

@Motomillion Жыл бұрын

Thank you Vinny!

@MrBrunoBOliveira Жыл бұрын

Awesome video Mani. I really like your content (and company)! This build is going to be amazing!

@Motomillion Жыл бұрын

Glad you enjoy it!

@garymertens2019 Жыл бұрын

Beautiful aftermarket parts looks awesome another great job and video Mani.

@Motomillion Жыл бұрын

Thank you Gary!

@karlwilliams8208 Жыл бұрын

Excellent video 👍🏻

@Motomillion Жыл бұрын

Thank you! Cheers!

@Eliminatormark45 Жыл бұрын

nice cnc parts beautiful waiting for part2 from Philipinnes

@Motomillion Жыл бұрын

Coming soon!

@KovertMecha Жыл бұрын

Those parts really stand out 🔥

@Motomillion Жыл бұрын

Once all the bodywork is on, it will really be those detailed touches we love to see!

@erg0101 Жыл бұрын

Amazing video Mani. 👍🏼

@Motomillion Жыл бұрын

Thank you!

@tirthacruiser Жыл бұрын

Best part is side stand

@Motomillion Жыл бұрын

Yes, it's a beautiful piece

@grzegorzboguslawski7470 Жыл бұрын

Pięknie Motomilion to wygląda...👌😉

@Motomillion Жыл бұрын

Dziękuję

@HooMeye Жыл бұрын

This is really crazy, but very interesting. The way you guys built a beautiful and good bike into an even better looking and better bike. I myself would stick to the original or even go for the lesser V4S and put the dry clutch on it. But these bikes are out of my reach. Here a V4 SP costs almost €48,000 which is $52,000.

@Motomillion Жыл бұрын

Thank you! The V4 base is also a great platform to start on. Check out our V4X videos, that bike started off as a V4 Base.

@maverick1367 Жыл бұрын

Dope❤

@carlosmacedo2285 Жыл бұрын

Fantastic details 👌 Thanks for sharing your knowledge! I have a 22 V4S, do you know where I can get the torque specs or service manual? Thanks

@2HYPR Жыл бұрын

One click is enough bro.. two-three times without letting it fully reset is actually over torquing the bolt

@anthonydemola 9 ай бұрын

To change the engine mount I can just undo those bolts and slide new one right in? Or do I have to jack up the motor?

@live2share Жыл бұрын

I'm curious to see how you will overcome the challenge mounting the exhaust on the carbon subframe

@Motomillion Жыл бұрын

Yes, it will be a challenge!

@blacjosh766 Жыл бұрын

will you be back in stock with the motocorse kickstands on the website anytime soon?

@hardeepjohal6693 Жыл бұрын

What a special bike this is ❤

@Motomillion Жыл бұрын

It is indeed! And we'll make it even more special when it's done!

@hardeepjohal6693 Жыл бұрын

@@Motomillion no one do what you do thanks for showing how this great bike can b more greater 🤩

@martinplum9314 Жыл бұрын

@motomillion Dose the kickstand match with a streetfighter v4s 2023? i have been looking up your website for the black one you put on your streetfighter and its been ''sold out'' for a long time now?

@1969Punjabi 5 ай бұрын

Love your mods on the V4. I have a question for you. Is there anything out there to provide any wind protection for a Streetfighter? I’ve seen the skimpy little plate just above the headlight. In addition to that, are there any partial side fairing panels or carbon bits that can help reduce wind drag?

@Motomillion 5 ай бұрын

Thank you. Nothing that will make a big difference.

@MMKJ Жыл бұрын

❤️

@HardcityRaindrops Жыл бұрын

I want to make my v2 a superlegero, a supper leg v2 could you image 😍😍. All black all carbon just a death hawk looking machine.

@Motomillion Жыл бұрын

Would be so cool! 👍 Hope to see you at Cota

@olitharovindu222 Жыл бұрын

what about the weight diff between cnc and the originals?

@Motomillion Жыл бұрын

Very comparable. We can weigh them and let you know.

@theperipateticgumshoe9047 Жыл бұрын

How often do you have to replace those dry clutch plates?

@Motomillion Жыл бұрын

It all depends, anything between 2600-3600 miles. We have seen the benefit of the Ducabike dry clutch cage with the air duct to prolong the life!

@MacPain1982 Жыл бұрын

Bike looks super cool but it is missing one thing VW logo :D

@Motomillion Жыл бұрын

Audi :P

@MacPain1982 Жыл бұрын

@@Motomillion C’mon Audi, ask Jaret he knows where Audi belongs to 😛

@Hugo_WP Жыл бұрын

This bike should have came in gloss back from factory.

@hva4897 Жыл бұрын

I let my v4 painted black looks way cooler than red

@Hugo_WP Жыл бұрын

@@hva4897 yeah for such expensive bike it should have came with clear coar also on the tank, it would give the bike a much premium look.

@carbonsanity3792 Жыл бұрын

all the cnc parts are cool buy a grand just for the rear set parts? that's a lot and doesn't seem worth it.

@Mandeepsingh-fh7jv 8 ай бұрын

❤