Tech-tip: APS CAM870 shell lifter/carrier installation guide [4K]

No video

Tech-tip: APS CAM870 shell lifter/carrier installation guide [4K]

Рет қаралды 6,382

Күн бұрын

PLEASE READ THE DESCRIPTION!
NOTE: This is an airsoft video!
In this video I will show you how to replace the APS CAM870 shell lifter/carrier. And while you are doing this you can also install the soft shell lifter/carrier spring if you wish.
Website: www.aps-concept.com
APS CAM870 Reinforced Carrier by Stainless Steel (CAM044): goo.gl/34MwWe
Hope you guys enjoy! Please remember to subscribe, like and share!
Website: www.nonexistent...
KZfaq : / cjawesome83
Facebook : / nxairsoft
Twitter : / cjawesome83
Instagram : / cjawesome83
Google+ : www.google.com/...

Пікірлер: 20

@walatsway7092 3 жыл бұрын

The demo and camera ,display on your palm, very detailed and explanation was precise. These have helped so many of us know how to because of your help,thank you!

@CJAwesome83 3 жыл бұрын

Thanks! :-D

@khursheedhassan3013 3 жыл бұрын

Bist video good working

@CJAwesome83 3 жыл бұрын

Thank you :-)

@tinalyden6691 2 жыл бұрын

Do they last long time be have replace the hammer in a couple

@crazyhorsemusx7767 7 жыл бұрын

As always thanks for taking he time to make these. Quicky question, have you attempted any mods to the part called the "dog" in the bolt assembly...I've headed this would help with binding issues and making the racking a lot smoother.

@crazyhorsemusx7767 7 жыл бұрын

I've read*

@CJAwesome83 7 жыл бұрын

Yes, this is true. In my last overhaul of my APS CAM870 (not the SAI) I found a place where the carrier dog was hitting a ledge on the trigger group housing that I filed down and smoothed out and it helped a lot. Along with about 4 other problems that made the action sticky. I plan on making a video covering this :D

@richieewinns 7 жыл бұрын

Thanks for still making videos man, I just recently subscribed because I found your glock videos EXTREMELY helpful with installation and general knowledge. Can you confirm TM slides fitting 100% on we glock frames? I know WEs aren't 1:1 ratio to the real glock, but not sure if that only applies to the slide, frame, or both. Reason I ask is because I want to build a SAI trademarked G17, but we internals and using the we frame until I can afford some high end stuff and better frame.

@CJAwesome83 7 жыл бұрын

Thanks man! Appreciate your feedback and support :D WE Glock 17 should be 99% compatible with TM parts so yah :o

@edmondfromyt9764 7 жыл бұрын

Nice video bro keep it up :)

@CJAwesome83 7 жыл бұрын

Thanks! :D

@tinalyden6691 2 жыл бұрын

And bolt

@mlhuott7407 7 жыл бұрын

I have a lancer gen 2 m16 m4 what are some good upgrades for the gun

@CJAwesome83 7 жыл бұрын

Hey, That's an AEG, right? Electric? I know nothing about those I'm afraid :p

@me_rap27 6 жыл бұрын

Does this resolve feeding issues? Slow reloading issues, etc?

@CJAwesome83 6 жыл бұрын

Not really. I would suggest the soft shell lifter spring for that.

@je5u5rodriguez20 3 жыл бұрын

Would this be the Same for the aps cam870 mk2

@CJAwesome83 3 жыл бұрын

Yes. Check out the full playlist for all my APS CAM870 videos here: kzfaq.info/sun/PLz5FTS2XoXasy5ZzCHy8qlIvDqvYwB_yh And these in particular: kzfaq.info/get/bejne/bdWElZWnu6ucd5s.html kzfaq.info/get/bejne/jbVniJR2t6umlKc.html

@je5u5rodriguez20 3 жыл бұрын

@@CJAwesome83 yo thnx just been through ur videos thnx it was very informative also ur shorty looks dope