No video
Tech-tip: Cybergun/WE Desert Eagle .50AE GBB reassembly guide - Slide [4K]
Рет қаралды 7,231
Күн бұрынPLEASE READ THE DESCRIPTION!
NOTE: This is an airsoft video!
IMPORTANT!
There are two mistakes in the exploded view reference image!
#1. The nozzle floating valve blocker screw (part no. 51) is NOT located on the top of the nozzle, but rather on the left hand side!
And of course the corresponding screw hole in the nozzle is located where the screw actually is! :p
#2. The slide fake gas piston (part no. 74) does NOT have the square sides facing horizontally (on the top and bottom), but rather vertically (on the left and right hand side respectively). At least that's how mine was out of the box.
In this video I show you how to reassemble the slide on the Cybergun/WE Desert Eagle .50AE GBB pistol.
Exploded view reference image (imgur): goo.gl/zGKtLN
Cybergun/WE Desert Eagle .50AE GBB (AsiaAirsoft): goo.gl/S6PRjj
Cybergun/WE Desert Eagle .50AE GBB spare parts (KY Airsoft): goo.gl/55985o
Hope you guys enjoy! Please remember to subscribe, like and share!
Website: www.nonexistent...
KZfaq : / cjawesome83
Facebook : / nxairsoft
Twitter : / cjawesome83
Instagram : / cjawesome83
Google+ : www.google.com/...
@thalescarmona 4 жыл бұрын
Thank you so much Brother! It was absolutely helpful to me. Best regards from Brazil...
@CJAwesome83 4 жыл бұрын
Great that the video helped you out! :D
@221zorro 2 ай бұрын
Bro you saved my ass thank you so much for the great tutorial
@thepurespartanify 6 жыл бұрын
I really love this desert eagle tbh
@CJAwesome83 6 жыл бұрын
Yeah it's a beast. But after handling it for a while I don't see what use I would have for it. Neither practical, in games and not even as a couch pistol due to the size of it. So I am going to be selling it. But if you like the Desert Eagle, this is a good pistol :D
@Frambhueee 6 жыл бұрын
Non Existent don't do it, keep it, is the best airsoft desert eagle, who cares if is non practical
@CJAwesome83 6 жыл бұрын
Hehe, it is cool, and I like it, but I just don't know what I would use it for... at all :o Maybe I will regret selling it, but I can always get another one if I do :D
@Frambhueee 6 жыл бұрын
Non Existent i will like if we or another company came out with a 10 inch barrel with full picatynny rail, inside with a 20cm 6.03 inner barrel and a maple leaf diamond bucking
@extramile3382 4 жыл бұрын
Thank you so much Non Existent!
@CJAwesome83 4 жыл бұрын
You're welcome! :-D
@batman206WRC 3 ай бұрын
Hi! My safety is very loose. Is there anything I can do to make it a bit stiffer? Like the one in the video? Thanks
@scasimir1000 2 жыл бұрын
Don't know if you're going to see this but if you do where can I get a replacement for the blowback nozzle mine's broken.
@lorenzorivas5670 3 жыл бұрын
Can someone please help me. I accidentally put on the slide with the barrel and spring and not it’s locked on the gun
@user-sl5fz3mz5n 6 жыл бұрын
What do you think of we desert eagle? is it worth buying? is there a good tokyo marui ？
@CJAwesome83 6 жыл бұрын
I think it's a good product. Full metal Desert Eagle from WE wiith markings :D TM is good but all plastic :(
@user-sl5fz3mz5n 6 жыл бұрын
Video do I like, when there is the lower part of the decomposition of the video ah?
@CJAwesome83 6 жыл бұрын
Sorry. Lower part recorded, need to edit and upload. Maybe soon :o
@user-sl5fz3mz5n 6 жыл бұрын
Non Existent ：OK thank you l know
@supxrmxndasmr4821 6 жыл бұрын
looking foward for the lower frame dissembling. hmm..
@jackfwoodward Жыл бұрын
What would you consider a good "fix" for a loose rear sight?
@ChanChan-uv3ql 6 жыл бұрын
Is the we m&p 100% tm spec?what aftermarket parts does the we m&p have?
@CJAwesome83 6 жыл бұрын
No, definately not. WE M&P was release many years before the TM M&P. WE M&P after market support is very limited.
@rav6274 5 жыл бұрын
Where can I get the slide separately? Mine never came in
@CJAwesome83 5 жыл бұрын
Contact KY Airsoft: www.kyairsoft.com | facebook.com/kyairsoftgun/
@AxelTheLight 3 жыл бұрын
Part 75 and 82 wont fit into place. Cant get those locking nuts back onto the cutouts on either side. The cutout isnt sitting properly in the middle so the nut wont sit flush at all. Any idea?
@CJAwesome83 3 жыл бұрын
Pretty sure those are directional/side specific. Make sure you have the correct one for left and right side. Try swapping them over and/or flipping them upside down :-)
@AxelTheLight 3 жыл бұрын
@@CJAwesome83 I had the rear sight on backwards! Fixed now
@dr.mehrwertgert6924 3 жыл бұрын
I change the blow back hop up unit and the front screw deformed the spring! What can i do? I dont found a new spring! 😪 I see your Video to late!
@CJAwesome83 3 жыл бұрын
You can get WE OEM spare parts from KY Airsoft. If it is the blowback nozzle screw, you want to get this part: www.kyairsoft.com/desert-eagle-62.html Otherwise review the exploded diagram and find the correct part and order a replacement!
@dr.mehrwertgert6924 3 жыл бұрын
@@CJAwesome83 Thx bro! 👍
@Darkkorex 3 жыл бұрын
My slide won't full go back.?
@Bigger_boot 2 жыл бұрын
Same here , did you find out the problem?
@SlashRfnR 4 жыл бұрын
for some reason, my 2018 silver model, refuses to let me take the slide off the frame after having removed the barrel. There's something blocking it from coming off. I tried holding back the hammer, the hammer and the trigger together but nothing. Might be those 2 lateral "hooks?" that are on the inner side of the frame, near the mag well area. If anyone has any idea, will be much appreciated.
@CJAwesome83 4 жыл бұрын
I've had some other people comment with this as well. They solved it but never told me exactly how. I do not think anything is blocking the slide from coming off, maybe just a bit sticky. Make sure the takedown lever is down and press the button and then rack the slide and let it go forward with some force (careful not to drop it) and it should come off.
@dr.mehrwertgert6924 3 жыл бұрын
I have the same Problem with my 2019 Black Model!🤔
@dr.mehrwertgert6924 3 жыл бұрын
I get the slide off with a lot of strength!😉
@Doksamauru Жыл бұрын
Theres a little switch on the side below the slide press the pin on on the other side and turn it make sure safety is off and make sure youre not grabbing the front barrel
@sebob7823 4 жыл бұрын
Please can you explain to me how to install the front sight on?
@CJAwesome83 4 жыл бұрын
I was never able to get mine off, let alone back in (since I didn't get it out :-p). But it appears to be a friction fit design where you need to push it down to compress a spring and ball detent and at the same time knock it out of the dovetail from the sides. I suggest looking up videos for RS Desert Eagle sight removal for tips!
@sebob7823 4 жыл бұрын
@@CJAwesome83 thanks, this helped a lot, also really good and entertaining video, I'm really thankful that you responded back
@nathangonzalez910 3 жыл бұрын
Wtf why are your nails always have like gloss on them
@CJAwesome83 3 жыл бұрын
Haha :-D Well. Seeing my own hands/fingers/nails in 4K while editing triggered my OCD a bit to try and keep them in good shape. So I maintain them pretty well because of that, cutting, sanding, polishing etc. So, they are well kept and polished (not nail polish, but like buffed polished). Better that they shine a bit than look nasty, right? :o
@nathangonzalez910 3 жыл бұрын
@@CJAwesome83 ya lol sorry for being mean something else was haping at the time
@CJAwesome83 3 жыл бұрын
That's alright, I've read worse comments :p
Non Existent
Рет қаралды 14 М.
What the Meowk!
Рет қаралды 9 МЛН
Non Existent
Рет қаралды 5 М.
Non Existent
Рет қаралды 30 М.
What the Meowk!
Рет қаралды 9 МЛН