Thank you so much👍 The spring in the mag release fell out on my glock, and I didn't know where it was suposed to go. If it wasn't for this video I would probably never have found out either. I'm subscribing👍
@CJAwesome833 жыл бұрын
Awesome, glad the video helped you out! :-D
@dragonslayer9844 Жыл бұрын
Same this guy just saved my soul from exploding
@patty190 Жыл бұрын
exCt same rhing happened to me bruh appreciate this man
@drangusbadger19765 жыл бұрын
Just used your disassembly and reassembly video to repair my ages-old Echo 1 Timberwolf along with adding some brand new parts. This was immensely helpful and easy to follow. Great job!!
@CJAwesome835 жыл бұрын
Awesome, glad it was helpful! :D
@blackshadows19922 жыл бұрын
dude you just saved my life with this video 14:57 - 17:05 thanks for uploading this video it really helped!!!
@CJAwesome832 жыл бұрын
Glad it helped!
@regimes3 жыл бұрын
STILL the best videos on diss- and reassembly of GBB's on this PLANET.
@CJAwesome833 жыл бұрын
Thank you very much for the kind words, nice to know the video still holds up after a couple of years :-D
@BalearicBeatnik4 жыл бұрын
thank you for this, just done my first field strip as its stopped working and found the seals have dried up and perished, old GBB i dug out from a cupboard - really useful for a n00b like me - cheers
@CJAwesome834 жыл бұрын
Always happy when someone's helped by my videos :-)
@alexanderjames64404 жыл бұрын
I just wanted to send you the biggest thank you I can muster!!! My glocks trigger jammed and without your videos I don't think I would've had the confidence to fix it . Thank you so much dude
@CJAwesome833 жыл бұрын
Many thanks for your thanks! :-D Always makes me happy when my videos help someone!
@simonandrew54562 жыл бұрын
Thank you, one of the most helpful videos I ever watched....because I opened it and I told myself...DEAD...FINISHED.....with your help...it's back.
@CJAwesome832 жыл бұрын
Great, happy the video helped you out :-)
@LastStar0073 жыл бұрын
6 years old and you're still a lifesaver.
@CJAwesome833 жыл бұрын
Noice :-D
@kengrier9487 жыл бұрын
Thank you for the very good tutorial.
@CJAwesome837 жыл бұрын
No problem :)
@dude...are-you-sure7 жыл бұрын
your hammer housing assembly has got to be the best way to put it all together. of all the videos i watched on youtube on that particular assembled subunit, non had done it the way you did. the other methods all had the installer trying to hold that spring in the cocked position and that makes the installation almost impossible for a newbie like myself. thanks to you i will no longer be afraid of taking that hammer housing apart~
@CJAwesome837 жыл бұрын
Thanks for the feedback man. Glad you got help from it. I am pretty pleased with the way I was able to put the hammer housing back together :D
@tommie29282 жыл бұрын
Hands down the best dissasembly and resassembly vid you can find on any gun, I wish you did all the GBBp and GBBr assemblies 😋
@CJAwesome832 жыл бұрын
Thank you very much. If I had 100% free time and $1,000,000,000 USD I would buy all GBB guns/rifles and do videos all day :-p Sadly, I don't have a billion dollars :-(
@tommie29282 жыл бұрын
@@CJAwesome83 I think we all wish to have that haha. Atleast youre doing a great job with the stuff you have right now :)
@michaeless8822 жыл бұрын
Thank you so much. I used this video along with the disassembly guide to convert my WE to TM running springs and valves. All this applies to Gel Blasters (I am in dystopia australia) same principals apply. BTW a WE Gen3 cost me USD175 give or take and a new outta the box TM costs USD800 give or take. The spring and valve kit cost me next to nothing -- very few guys here know how to do a COMPETENT task.
@CJAwesome832 жыл бұрын
Awesome, always makes me happy when my videos help someone out! I have heard about "airsoft" in Australia and I really feel for you man, no access to real fire arms or even decent looking and functioning replicas :-| That's rough!
@michaeless8822 жыл бұрын
@@CJAwesome83 Thank you too. I buy a lottery ticket a few times each year and if I ever won my intention is to pack up and move to Arizona which has a lot going for it (especially good laws in favour of Sporting Shooters).
@JJ2019P Жыл бұрын
I always had hard times with inserting the hammer into the chassis. I just finished disassembling and reassembling my vx9, thank you so much!
@maxdd41245 жыл бұрын
Awesome thank you sooooo much! I accidentally removed the slide lock pen in my curiosity and I couldn’t fix it on my own thank you sooooooooooooooooooooo much !!!!
@CJAwesome835 жыл бұрын
Cool, glad you found the video helpful :)
@Juanitoveintittres2 жыл бұрын
Brother from another mother thank you so much for your vid by far is the best one on the tube I finally got to install my cow cow trigger thanks to you
@popacepi9712 жыл бұрын
thank you for this video, very helpful because i had disassemble my we g17 and of course i was not able to build it back in until i saw your video, cheers my dude !!!!
@CJAwesome832 жыл бұрын
Thank you for the kind comment :-)
@iareairsofttj8883 жыл бұрын
Best tutorial on airsoft gun I have seen. Thank you for this 💯
@CJAwesome833 жыл бұрын
Thanks! Glad you got helped by the video :-)
@robbhart4522 жыл бұрын
Awesome guide, replacing my hammer roller for a bearing one was a breeze thanks to you !
@CJAwesome832 жыл бұрын
Glad it helped!
@viktoresin90103 жыл бұрын
Thank you alot, your video is very helpful. I have no idea what i would do without you.
@CJAwesome833 жыл бұрын
Thanks for the comment! Always happy when my videos are helpful :-)
@kingjess896 ай бұрын
Your video helped me alot with my tti glock17❤❤ i had trouble reassemble my hammer
@az96b24 жыл бұрын
Huge thanks my trigger stopped working and i dismantled it without knowing how to reassemble. It was fiddly but I've fixed it now thanks!
@CJAwesome834 жыл бұрын
Awesome! Glad you were helped by the video :-)
@lewispoole99028 ай бұрын
Thank you so much for this I had to rebuild my Hammer/ Valve knocker set with the parts I had spare and some tweaking I have a functional unit!
@WZNGT3 жыл бұрын
Whew... took my Fighting Bro G17 apart this afternoon to replace the cracked plastic trigger. I spent most of the time on getting the pins into the new one (holes were kinda too small), but eventually I got it assembled and working fine with your video.
@CJAwesome833 жыл бұрын
Awesome, glad to hear it. Always happy to help :-)
@RegretfullyMine4 жыл бұрын
Thank you! I was using my g17 as a prop and one of the guys on set fidgeted around with it too much and messed up the mag release. It’s back to normal now.
@CJAwesome834 жыл бұрын
Always happy to help :-)
@JakezMad3 жыл бұрын
the slide catch had come out at some point in disassembly and I had no idea but I fixed it working back through the with your help thanks a lot man
@odeltabura72005 жыл бұрын
Thank you.. It's very useful for us that don't know how to fix..
@CJAwesome835 жыл бұрын
Awesome, always happy when this helps someone :)
@l1k0s4ever7 жыл бұрын
thank god i found this tutorial, all rest on the web have the springs installed wrong, have been troubled for weeks
@CJAwesome837 жыл бұрын
Thanks for the feedback man! Make sure to share this video so other's don't have to suffer like you did ;-)
@ZawcheeOnYoutubeDotCoom Жыл бұрын
no cap worlds most comprehensive toY glock reassembly
@kim_withdraw4 жыл бұрын
YOU are my true hero :)
@CJAwesome834 жыл бұрын
Thank you :-)
@barryjohnson87333 жыл бұрын
Thank you I was having some trouble with my gun
@CJAwesome833 жыл бұрын
Awesome, glad the video helped you out! :-)
@propamintsunshine213 Жыл бұрын
You just helped me fix my glock
@WrongFromWright7 жыл бұрын
Just fixed my stark arms g19 with this vid. Theres one more step to the SA, but it was quite easy to figure out. Thanks again!
@CJAwesome837 жыл бұрын
Yeah the Stark is a little bit different actually. Perhaps I should do a video like this for my stock SA Glock 19 before I sell it :-D
@WrongFromWright7 жыл бұрын
Maybe you should. I might be interested in purchasing it from you.
@CJAwesome837 жыл бұрын
Ah. Yah know what the problem is shipping, handling and customs which makes it very difficult to give you a decent price on it so I prefer domestic sales as my first route. But if you really want it I am open for that as well.
@jamesdibben20023 жыл бұрын
Really helpful and easy to follow guide! Thanks!
@CJAwesome833 жыл бұрын
Glad it helped!
@Gienkuu6 күн бұрын
Right as you were saying that you should be careful with the valve knocker spring it flew off somewhere into my room and I'm not sure if I will find it. Good video tho 💪💪💪 Additionaly I have some parts that were not in the video (maybe because mine is an g18c)
@machonacho957 жыл бұрын
Thank you very much, this helped me tremendously to install the Action Hammer Bearing Set in my WE Glock 17!
@CJAwesome837 жыл бұрын
No problem man! Glad you found the video helpful! :-D
@Frambhueee5 жыл бұрын
How good is the action hammer bearing? Doesn't have any issues til now?
@sgtcampbell4 жыл бұрын
Thanks for this. Very helpful
@CJAwesome834 жыл бұрын
You're welcome!
@buddhab0mb2544 жыл бұрын
Thank for this video man, you are a life saver
@CJAwesome834 жыл бұрын
Glad it helped :-)
@nyts_ride27328 жыл бұрын
Thank you bro ! You helped me so much !
@CJAwesome838 жыл бұрын
+Tony Jespersen Glad you found it useful :D
@bilguun5818 Жыл бұрын
Thank you my dude😎. Helped me a lot
@AlvinHariPrasetyo Жыл бұрын
Thanks brother
@gorman22743 жыл бұрын
Buraz ti si moj spasitelj!!!
@andyreddington32016 жыл бұрын
Thank you so much. This was very very helpful
@CJAwesome836 жыл бұрын
You're welcome! :D
@user-xk6uk2vx5o5 жыл бұрын
thank you sooooooooooooooooo much this video help me very much thx
@CJAwesome835 жыл бұрын
You're welcome. Glad you found it useful :D
@Jinchuurikizinhu6 жыл бұрын
exxxxcelent. helped me a lot to understand how it works and "fix" my G!
@CJAwesome836 жыл бұрын
You're welcome :)
@kurdapiotv88332 жыл бұрын
Done! Ty so much!
@CJAwesome832 жыл бұрын
You're welcome :-)
@MAVERICK-tc2vw5 жыл бұрын
You are a LEGEND!!!
@CJAwesome835 жыл бұрын
Thanks :D
@gustavolozano3075 жыл бұрын
You save my life! Amazing video! Thanks bro!
@CJAwesome835 жыл бұрын
Thanks man. Glad you got help from the video :)
@JoeJ5237 ай бұрын
How to make the trigger pull alot lighter???????? Awesome video by the way!!!!!
@Bender_B._Rodriguez Жыл бұрын
Like the top commentor I have the same timberwolf, no lower upgrades but I thought my trigger got stuck againbecause it happens from blue moon to blue moon and that requires the entire teardown. I forgot about the trigger lock airsoft g series have and that may have been the culprit instead of the trigger just locking up like it has done before. This thing is really old and worn the fuck out and im suprised it still works.
@mikestriker43713 жыл бұрын
cool thanks
@CJAwesome833 жыл бұрын
No problem!
@raymenchu77454 ай бұрын
Very nice
@AeroLogics7 жыл бұрын
thank you so much
@CJAwesome837 жыл бұрын
:D
@MrMirkoxx6 жыл бұрын
you saved my li..money :D thank you bro. really nice and helpfull video!
@CJAwesome836 жыл бұрын
No problem man! :D
@leonardovand Жыл бұрын
Thanks bro!!!
@nurmohammedabdullatiff72343 жыл бұрын
Very2 good tq bro
@thomaswente7584 Жыл бұрын
Very helpfull thx!
@shitfacetv7838 Жыл бұрын
Can you put the mag release to the other side if you are left handed or not ?
@SaltedChili6 жыл бұрын
Great video
@rioentertainment218 Жыл бұрын
Sir can u tell me why sometimes i shooting my gun goes to full auto?
@DjGoB796 жыл бұрын
tnks man , help me a lot .A+ for you
@CJAwesome836 жыл бұрын
Awesome! :D
@amishwaseem5462 жыл бұрын
Bro need help I have a we Glock 17 gen 5 it’s Barrel is stuck it’s not going forward or backward means I can’t load my gun and can’t take it off it’s barrel
@Peter-wo4uo3 жыл бұрын
Hey man, my hammer spring broke, any way i can buy one?
@CJAwesome833 жыл бұрын
For WE OEM parts check out KY Airsoft: www.kyairsoft.com/ Direct replacement part: www.kyairsoft.com/parts/we-pistols-gbbp/g-series/g-g-22-semi-gbbp.html
@monstraogamer8188 Жыл бұрын
Nice!!! Tks
@kimocruz35843 жыл бұрын
i lost my valve reset knocker and it seems my gun works fine but it seems a lot less gas efficient is that an issue?
@CJAwesome833 жыл бұрын
Yes, that is an issue. The valve reset knocker resets the valve knocker and closes the gas flow when the slide blows back. You need to replace it!
@slzslz5 жыл бұрын
Great tutorial! Gotta ask you, on my KJW Glock 19, i get light striking. Everyone said the hammer spring so i replaced it, using this guide. Problem still persists...what should i try now?
@CJAwesome835 жыл бұрын
Could be that your valve knocker is worn or broken and not striking the magazine valve fully which would explain why an upgraded hammer spring did not solve the issue.
@edwardleonen14422 жыл бұрын
Is the real glock 19 frame parts can fit into that polymer frame?
@CJAwesome832 жыл бұрын
No.
@edwardleonen14422 жыл бұрын
@@CJAwesome83 maybe the umarex will fit
@JosephPowel5 ай бұрын
Yes they can
@lmostayoutuber3 жыл бұрын
I built a g26 with a nova kit using a kjw g27 donor gun,but its too stiff on first cocking, if I dont pull the trigger it cocks ok, but if I cock it and pull the trigger its hard to cock again,so its the wheel or the hammer thats provides too much resistance, replaced the wheel with a 6mm bearing but it still vents after the first shot, should I use a weaker hammer spring?
@CJAwesome833 жыл бұрын
Hrmmm. Not too good with those specific issues but yeah, sounds like you should try a softer hammer spring in it. Because when the pistol fires and it blows back, if it does not have enough force to blow the slide all the way back it will not trip the valve reset knocker which will leave the magazine valve open and vent all the gas. You could also possibly try a weaker recoil spring but that will impact the overall feel and snappiness of the pistol so that would be my second choice.
@georgecurtis13028 жыл бұрын
Thanks so much, great video!!! +1 sub ;)
@mitsukiiiiiiiiiiiiiiiiiiiiiiii2 жыл бұрын
15:20 I can't get this part down my gun also came with an extended slide catch
@mitsukiiiiiiiiiiiiiiiiiiiiiiii2 жыл бұрын
the spring won't stay in place
@rangi.marsden85852 жыл бұрын
can you do this but for the m&p 9? my mag release fell out and its different to yours
@CJAwesome832 жыл бұрын
Sorry, I don't have an M&P at the moment.
@dylancarter37763 жыл бұрын
My glock 18c mag release spring came out so did my mag release can I have a tutorial on how to
@CJAwesome833 жыл бұрын
What you are asking for is covered in the video you made this comment on :p
@julianrivera25362 жыл бұрын
Hey I’m having a problem. My Glock no longer cycles fully and I’ve replaced the hammer spring twice now 140% and 120% I’m staring to suspect my hammer sear spring is messed up and that’s the reason why but idk how to test this without ordering parts from Japan
@CJAwesome832 жыл бұрын
Don't think you can test that theory without extra parts. However, one other thing it could be is a worn magazine catch, meaning the magazine is not seating fully up against the nozzle, meaning too much gas escapes when firing, and not being powerful enough to cycle the slide fully. Try gently pushing the magazine up in the frame when firing and see if that helps, if yes, you need a new magazine catch button.
@julianrivera25362 жыл бұрын
@@CJAwesome83 I finally found my issue, I use a aps nozzle with the DP light weight bbu because its looser inside the bbu removing a point of wear that used to mess up my cycling for a long time when I had a GA nozzle and it works perfect with the Poseidon ice pix ice breaker piston head and flute valve setup I have but there’s one thing, it uses a single pin to hold the flute valve in rather then the regular nozzle setup. I ended up finding it have become loose and the flute valve no longer fully closed. I glued it with a tiny drop of jbweld and it all worked again!! Also yes the mag is seating nicely for now but thanks for the heads up when it will happen! Glad my Glock works!
@mattivirta3 жыл бұрын
can WE glock 19 or 19x change mag release button left to right, i use gun left hand.
@CJAwesome833 жыл бұрын
No. The WE magazines are not cut on the right hand side to allow for a reversed magazine release to work.
@LottaMiataz5 жыл бұрын
Have a WE g19 And got a whole new assembly and Did this but when I Put in the Assembly and test Trigger, it will not fire, am I Not lining up the Trigger bar correctly?
@CJAwesome835 жыл бұрын
If you just assembled the frame and not put the slide on, press down on the two tabs on each side of the trigger housing to reset the trigger/hammer. I.e. push down the trigger bar tab and the valve reset knocker tab.
@neider18 жыл бұрын
Thanks, helped me a lot on the slide catch spring Do you also know if the trigger spring can be upgraded?
@CJAwesome838 жыл бұрын
+Generation Nuke No problem man! Glad it was helpful! Do you mean the spring between the trigger bar and the inside frame, or which spring?
@neider18 жыл бұрын
Yes that one, so i can feel more resistance and it snaps back faster. got the WE G17 Force so trigger travel is already short but the reset is not that great. Sometimes i have to help it (user error on the spring caused this)
@CJAwesome838 жыл бұрын
+Generation Nuke I see. Then the answer is No-ish... :p There are "reinforced" spring kits for the TM/WE Glocks that have that spring but I doubt they will give you what you are looking for. Sorry.
@neider18 жыл бұрын
+Non Existent no-ish... guess that means modification time
@Brad872577 жыл бұрын
Thank youuuuuu!
@CJAwesome837 жыл бұрын
You're welcome :D
@sgtcaco2 жыл бұрын
I’m going insane step 2.5 hours . Still going, mine doesn’t just slip in.
@CJAwesome832 жыл бұрын
Take a break, step away from the parts. Do something else and come back to it and try it again :-)
@Epilogue_x8 жыл бұрын
This is not a WE G19 right? I noticed the fully traded slide lol.
@CJAwesome838 жыл бұрын
+Zhehan Xiong Actually it is. I got it with full markings from KIC Taiwan. It's the "HK3P" version of the WE Glock 19, with full markings.
@Epilogue_x8 жыл бұрын
Thanks for the info, I totally forgot about this info. Just another quick question. For your Stark Arms G19, Do u have the problem that the slide doesn't lock back for empty chamber when using WE mags? Love your videos, keep up the good work!
@CJAwesome838 жыл бұрын
+Zhehan Xiong Haven't tried my WE Glock 19 magazines in the stark very much to be honest. I have plently Stark Glock 19 magazines for my Stark :p
@james1980bad2 жыл бұрын
謝謝
@CJAwesome832 жыл бұрын
没问题 :-D
@doctormclovin26347 жыл бұрын
Non Existent hey and thank you for the awesome vids!!! Can you point me to a site with upgrades for a KJW Glock 23?
@CJAwesome837 жыл бұрын
Thanks man! :D Yep, I recommend Rainbow8 for upgrades for KJW Glocks : www.rainbow8.com/
@user-iy7eb8ht9v5 жыл бұрын
how to slide catch?
@CJAwesome835 жыл бұрын
Sorry I do not understand :(
@sgtcaco2 жыл бұрын
My fingers to big for this been a bout 4 hours on the first step.
@CJAwesome832 жыл бұрын
Sorry to hear that man. I have the opposite as you can tell, multiple commenters have referred to me as "bitch hands" :-p Take your time and go slow.
@sgtcaco2 жыл бұрын
@@CJAwesome83 yeh I had finally found a very unconventional way of doing this step by putting it on a table at a certain angle and forcing it in with body wait. I remember it was a painful ordeal.
@geraldwiedemann21265 жыл бұрын
22:00
@sgtcaco2 жыл бұрын
F …you we Tech I got it . I have my own technique now, it’s called using my body weight to put pressure on it . Halaluya
@CJAwesome832 жыл бұрын
Awesome! :-D
@sgtcaco2 жыл бұрын
@@CJAwesome83 oh dude, that was a painful experience, I think because my block is new , the spring was very tight and the part is a tiny bit different. I just couldn’t hold it there under pressure with my fat fingers. So I finally worked out that if I got it kind of in place then flip it up side down on a table and put a screw driver on top of that part, I could then push down on it with more pressure. I was so happy once I had it in there. Thanks for your tutorial mate, it helped a lot and would have been impossible if I had to include that center part at the same time.