Thanks Benson. I bought this machine and it's great. I'm a complete newbie to 3D printing. I was looking to buy a 3D printer to start this new hobby. Thanks to you and other reviewers who reviewed the Tenlog. For those looking for a new machine, I really recommend this model. Dual extrusion machines are only slightly more complicated than single extrusion. In fact it works exactly the same. The second print head just parks itself at the end when you're not using it. My user experience has been joyful. From unpacking the perfectly packed box, to setting up the machine. All the tools were provided. They even give an extra screw for each set of screws. Its almost impossible to connect the cables incorrectly. They provide a USB stick (I have no idea why) and an SD card with the CURA software on it for you to download. They also give two spools of PLA which sem to be good quality (my prints came of good) The best thing is since the reviews I have watched, Tenlog has improved the machine. The second printhead height adjustment is now from the back of the printhead. You loosen two allen screws and turn the red knob to raise / lower the printhead , then retighten the allen screws. They also now provide the wire brush to clean the nozzle at the end of the stroke. The worse thing about this machine is the cable management. The cables just hang all over the place. It doesn't affect the printing at all but it would be nice to have the cables routed properly and looking neat. Also the fan noise from under hood is really loud. You cannot put this in a bedroom. Also one of the X axis belts came abit loose. I haven't adjusted it and the machine still works fine. I'm happy to write this comprehensive review because I hope Tenlog continues to do well and also to help anyone who may be deciding to get this machine. I give this machine a solid 5 stars.

LOL great video and sound effects... I had to look and see if my printer was running when it was you at 8:42 ..... lmao

that is a beautiful machine. looking forward to a followup video once you fine-tune it

Cool review, cheers Benson!

Loved this review and the one month followup. A great no BS review that is all real world. Thanks for this review I learned a lot about what to expect and what this printer does.

Nice review, I enjoyed it. Thanks for sharing.

Your video gave me the confidence to buy this machine. So far so good. Thank you!

Good review

Really good thanks

Fantastic

Great video. Have you tried the filament runout sensors yet? I bought this printer this past December (and I love it) but I have ran out of filament twice and the sensors did not pause the print like they're suppost to.

hey ben great video. question for you. How long did it take to make the dragon and the dual vase. I am looking to create building for my train set. 6in x 6in x 6in. i want to paint the buiding. Can you paint the glue the building. How long do you think it would take? thanks

Hi Benson, goo review, please could You put the file of dragon in TLD format or STL with cura parameters, just to understanding how the tower layout works. I tried to increase the speed and acceleration of movements on void areas but the printer looks like not be affected of these setting as like if it have a hardware lock, Do you know nothing about it? Also I Tried to increase the retraction speed of filament, but also this one could be not change .

isn't there some tweaking of the second head height that you skipped after the paper dragging for the first print head?

I’ve seen other printers with auto leveling beds. Are those just nice to have and not needed or is that an important feature?

Do you think you could put in a bl touch on these machines ?

What's the point of mirror mode and duplicate mode? Same result. Edit: I think I got it. The duplicate mode prints the same file twice, the mirror mode prints a standard print, and a mirror image of that file on the other side.

what material are you using? is it water resistant?

i wish you tried tolerances! but the finish actually looks bad to me!

Hi Benson, thanks for the review! what software do you use to print with? Also, what's the name of the Facebook group please? I have one of these and would like to join!

Hi Benson, I am thinking of buying one ,do you recommend?

Hey Benson. I bought one of these and well, let's just say I'm not thrilled. I can't seem to get a print off it if that looks better than a chimp could do with a 3d printing pen lol. I'm trying to determine if there is a mechanical issue with the extruders, or something else. Would you be willing to post your printer profile, and maybe your filament profile(s) as well? If I can import a known good profile and my prints still stink, then I either toss it in a lake, buy another one, or talk to Tenlog about repairing it. I'm willing to pay you for your time.

Can this printer print STL files?

Can you share the dragon file?

I like your stepper motor impersonations: Eeeeee Eeeeee Mmmmmm Mmmmmm....

what printer software? thanks

Do the print heads drop downward when there is a resume to print after a power failure?

I dono but my Ender 3 Pro does a hell of a lot better for the finish... that one seems to need more adjustments in MHO... the finish looks rough to me... maybe I'm spoiled with my Ender 3 pro....

you dont need a prime tower if you got a dual extruder .... pls correct me.

Are you using simplify 3D? If so can you share your profile I can get mine to work

Can you please help me decide on a printer. I don’t want to buy one then after a month buy another. I am interested in dog heads and human faces or masks etc. Enjoyed you video. Please help me medide