TEST: Stock Chokes Vs. Aftermarket Extended Choke Tubes

Рет қаралды 18,254

2 жыл бұрын

This test compares flush factory choke tubes against extended ported aftermarket chokes. It tests pattern density and consistency of pattern distribution. I test both a waterfowl hunting ammo and a dove/crow/target load through factory modified and full chokes and then test them both through modified and full Carlson's extended ported aftermarket chokes. The results can help you pick the right choke tube for your budget and objectives.
Carlson's Sporting Clays Choke Tubes - amzn.to/3MCww6Z
Support the channel on Patreon: / thenewhuntersguide
The New Hunters Guide podcast: www.newhuntersguide.com/ Hunting Gear
I counted every single pellet on all targets in a 30" circle, shot at 40 yards. The results of this experiment showed an increase in pattern density with the aftermarket chokes, but no significant difference in how evenly the patterns were distributed. The stock chokes were the factory modified and full that came with my 12-gauge Mossberg 930 with a 28" barrel. Carlsons provided some of the chokes I tested in this video at my request, thanks to them for their support.
Hunting Gear
Tetra Hearing protection: tetrahearing.com/collections/...
Get 10% off with the code: NHG2410
Holosun 507K Red Dot Sight: amzn.to/3Ig9NyK
Muck Arctic Pro Boot - amzn.to/3HpqPpV
RedHead Rubber Boot - cabelas.xhuc.net/5bzKN9
Darn Tough Hunter Socks - amzn.to/3ROwrBo
First Lite Furnace Long John - amzn.to/3M7PX8d
First Lite Furnace - amzn.to/3RTkuL0
First Lite Kiln Crew - amzn.to/46o7AuG
First Lite Kiln Long John - amzn.to/3JB4jP1
First Lite Tundra Balaclava - amzn.to/3BUK0XL
Sitka Fanatic Beanie - amzn.to/3HpnLu3
Cabela's MT050 Bibs - cabelas.xhuc.net/7mKdq5
Cabela's MT050 Parka - cabelas.xhuc.net/P0nBER
Cabela's GORE-TEX Glomitts - cabelas.xhuc.net/qnoV9N
If you purchase something through the above affiliate links, it helps support the channel. Thank you!

Пікірлер: 75

@PoppaWheelies 3 ай бұрын

Subscribed, mainly for the energy and willingness to go through the trouble to bring us the info. I recently patterned for the first time ever , after three shots , and putting a sharpie mark on each hole to help count and show up on camera , I was over it !

@TheNewHuntersGuide 3 ай бұрын

Haha, thanks! Yea, it is a bunch of work for sure. I'm trying to focus the videos more and get more to the data, but ya gotta show the patterns. They take so much work to do lol.

@PoppaWheelies 3 ай бұрын

@@TheNewHuntersGuide NGD was this past Friday. Used, only came with flush full. I’ve shot fixed mod 1100 for most of my entire shotgun history. Someone gave me a Light Mod for the tournament . Pattern board Friday night only hurt me. Saturday morning , I was too concerned with my “up and left “ findings . Stations 1-3 on the main event , that morning weren’t so pretty . I borrowed a Mod ,at station 4, and proceeded to turn things around quite valiantly ! I think most of it was between the ears.

@JWKnowsstuff 2 жыл бұрын

Found you a couple of days ago. You don't have a lot of subscribers yet but I love the energy and content.

@TheNewHuntersGuide 2 жыл бұрын

Thank you so much, I really appreciate it!

@turkeyhunter7617 6 ай бұрын

Cool test 👍👍

@TheNewHuntersGuide 6 ай бұрын

Thank you!

@joewilkins8248 2 жыл бұрын

This test doesn't really show anything significant. Both full chokes threw essentially the same pattern. The modified chokes produced different patterns at 40 yards, but a "Modified" choke is defined as a choke that patterns 60% at forty yards. Hence the two "full" chokes were actually modified chokes and the "modified" chokes were somewhere between skeet and modified depending on the load. The fact that one of the tubes was extended and ported doesn't really mean anything. If your goal was to achieve the greatest pattern density at 40 yards, the factory "full" did just as well as the after-market choke.

@TheNewHuntersGuide 2 жыл бұрын

Joe, I disagree. This test does show something significant. That there wasn't much difference, exactly what you pointed out. But it was real data from the field that shows some difference. Nothing groundbreaking. But if the truth is not groundbreaking then that is fine by me. People need more information based on real testing, not internet speculation. People everywhere claim all sorts of things about chokes, some are crazy. So I've set out to do real tests and show what's really happening, as unspectacular as that might be.

@hazmatmob1l335 2 жыл бұрын

Pretty well put together video with some good info.

@TheNewHuntersGuide 2 жыл бұрын

Thanks so much!

@hazmatmob1l335 2 жыл бұрын

@@TheNewHuntersGuide just subscribed hope to see your channel grow

@TheNewHuntersGuide 2 жыл бұрын

@@hazmatmob1l335 Thank you!

@Drblood6721 2 жыл бұрын

Glad I've been running my extended ported cremator LR all along!

@TheNewHuntersGuide 2 жыл бұрын

I've done some further testing since I recorded this and found that most of the time, aftermarket chokes provide significant benefit over factory. To the point where I feel bad about using some of those factory chokes for years hunting ducks.

@Drblood6721 2 жыл бұрын

@@TheNewHuntersGuide I know the MR and LR cremator's pattern great but I'm interested to see if they are tighter constriction than a factory mod or full and that is why they pattern better or if it is just better construction/materials.

@TheNewHuntersGuide 2 жыл бұрын

@@Drblood6721 Sometimes I think design does play a factor, and sometimes it's just a matter of synergy with a particular gun. But I've heard good things about the Cremators, they aren't the top recommendation for bismuth, or I'd have them too.

@Drblood6721 2 жыл бұрын

@@TheNewHuntersGuide What interested me in them was the fact that you don't have shot size restrictions even in full. I tested Kent fasteel 2.0 #2 1 3/8oz, boss 3/5 1 1/2oz and Federal #2 1 1/4oz all 3" shells and at 40 yds and longrange choke, had the highest percentage total (hits/pellets) in a 12in circle with the federal, although boss had a similar hit count, I couldn't find the 3/5 pellet count. Both had around 26-28in a 12in circle at 40 yds.

@AmericanArmsChannel 2 жыл бұрын

Great quick look at what going to an extended aftermarket choke can do for patterns. Good job. It has been my experience that the disparity between OEM and Aftermarket extended chokes is primarily due to length of the Parallel Section and the profile of the constricting section entering it. In this particular example, you have a very short choke system that has an abrupt constriction and short parallel section (Remington's and Mossberg's choke designs are among the shortest). Lengthening both the constricting and parallel sections of the chokes eases the shot charge's transition from Open Bore to constriction and better controls it on exit (at least in theory, there are always exceptions). As the choke design lengthens, however, I have seen less drastic differences between OEM and aftermarket chokes, especially when comparing extended OEM to extended aftermarket. Having looked at the results in the Beretta/Benelli Mobile (12 and 20ga), Benelli Crio (12ga), Browning Invector 10, and Winchester/Browning Invector (12ga - SX4), I can say that what mattered more on pattern efficiency and evenness between OEM and Aftermarket chokes was not just the length of the parallel section, but the diameter/constriction of a given choke for the shot type and sizes used. It is the later of these two that really makes the greatest differences in patterning efficiency and density for any given load. In my experience it has been more important to match the constriction needed to pattern well with a given load than it is the other way around, regardless of choke design and manufacture.

@TheNewHuntersGuide 2 жыл бұрын

I hear you. What was interesting to me here is that the aftermarket full did only slightly better than the stock full for both loads, but the aftermarket modified did alot better for both loads. I've done some further testing since I recorded this and found that most of the time, aftermarket chokes provide significant benefit over factory the tighter you go when shooting bismuth. To the point where I feel bad about using some of those factory chokes for years hunting ducks.

@AmericanArmsChannel 2 жыл бұрын

@@TheNewHuntersGuide it’s all valid data points and shows the importance of patterning your gun/load/choke combos. There are the “rules of thumb”, but they mean bunk until you actually test your gear. When it comes to shotshell patterns for ducks and geese I see a lot of arguments about “it’s good enough, I don’t shoot past 40 anyways”, and while you can harvest critters with inefficient patterns and poor choice in shot materials, it raises the probability that you will have a bad pattern that doesn’t cleanly dispatch your quarry. To me, I want to know that if I do everything right and get that animal in that pattern it will 99% of the time die. I want the only factor in whether or not that animal is cleanly dispatched to be me. A good indian makes sure he can’t ever blame the bow. I’m glad you are putting together these videos. You’ve got a good presentation style and I’m sure it’s helping folks learn to be better hunters. Keep it up!

@TheNewHuntersGuide 2 жыл бұрын

@@AmericanArmsChannel Thank you!

@riverrivers250 2 жыл бұрын

I always felt like the moss 500 factory chokes were soo short lol. So i bought extended chokes.. patterns better imo,,, i was using the factory full choke for the longest time that it swelled in my barrel and was hard to get out. Had to Use a bolt extractor

@kross1261 Жыл бұрын

I tried some extended ported choke tube for my Benellis awhile back designed for Hevi Metal shells “back when they were good”. Compared to the crio tubes in my Benelli they did no better in fact a bit worse in most circumstances plus louder and better chance of muzzle blasting your hunting buddies. But admittedly the Benelli and the Mossberg are 2 very different guns.

@TheNewHuntersGuide Жыл бұрын

Yea, Benelli is known for their factory chokes. Aftermarket chokes could yield better results, but it would be more a factor of random synergy than increase in quality.

@josephsnisky1851 Жыл бұрын

The chokes that sit flush usually have 3/8 or 7/16 of choke at the end. The extended chokes have an 1 1/8 to 1 1/2 inches of choking and aligns your shot uniform as it exists the barrel.

@TheNewHuntersGuide Жыл бұрын

Thanks!

@in.hindsight Жыл бұрын

So from the data, the tighter constrictions really don't warrant aftermarket extended chokes since there's very little difference. You've helped me save some money.

@TheNewHuntersGuide Жыл бұрын

As far as these chokes for this gun, that is a fair conclusion. Some guns come with great factory chokes, this one didn't. But newer Mossberg's like the 940's do.

@pedrojsanchezalvarado5569 2 жыл бұрын

Muy buenas chokes full amigos saludos

@TheNewHuntersGuide 2 жыл бұрын

Thank You! Gracias.

@dayleash2784 Жыл бұрын

Please do a test of Pattermaster Choke tubes vs other aftermarket tubes.

@TheNewHuntersGuide Жыл бұрын

I tried to get some, but never heard back from them. After the videos surviving duck season did, I'm not sure what the potential benefits are supposed to be.

@jeffbarris8172 2 жыл бұрын

Boss recommended briley ported tubes to me when I was looking for a aftermarket tube for my 555 compact. I would like to see the difference between briley and others

@TheNewHuntersGuide 2 жыл бұрын

Interesting, I talked to them as well and for the Mossberg 930 they actually recommended the Carlson's Sporting Clays to me. Which is why I got these ones. Both those guns are very different. I have another video coming where I test 6 chokes with the BOSS #4s and some gigantic paper to see which does best.

@jeffbarris8172 2 жыл бұрын

@@TheNewHuntersGuide can't wait!

@dayleash2784 Жыл бұрын

please to this same test with a Benelli Super Black Eagle III. They have better factory tubes than mossberg. Compare to Carlson and Patternmaster after market choke tubes at so many people are using.

@TheNewHuntersGuide Жыл бұрын

I certainly would, if I had one. Gonna need alot of patreon supporters to make that happen though lol.

@ri7589 2 жыл бұрын

I’d be curious to see how extended chokes compare to chokes made for specific purposes with the same exit diameters perform.

@TheNewHuntersGuide 2 жыл бұрын

So, like Carlson's chokes made specifically for Steel, Bismuth, or TSS that have the same constriction?

@ri7589 2 жыл бұрын

Yes, but to even expand on that chokes made for waterfowl versus something like a modified choke…Hard to explain but you’re on the right path

@gregdonahue7987 10 ай бұрын

Do you think aftermarket flush tubes would perform any different from factory flush tubes?

@TheNewHuntersGuide 10 ай бұрын

That is a hard question. Best answer I can give is sometimes. The higher end the gun, the less likely I think aftermarket recessed chokes would boost performance. Cheap guns are more likely to see gains. But it really comes down to gun/choke fit. No 2 guns are the same. If I were going to buy chokes I would invest in quality extended tubes, probably Muller or Carlsons. If your stock chokes give you decent performance than stick with them.

@larrypence7732 Жыл бұрын

I wanted to know which to buy flush or extended chokes for clays shooting

@TheNewHuntersGuide Жыл бұрын

I think extended tend to be better. But not always. A high quality fitted can be as good.

@corysnladventures2758 Жыл бұрын

My Mossberg 935 Magnum comes with 3-in chokes. Your Mossberg 930 choke appears to be no longer than inch and a half long which I find curious?

@TheNewHuntersGuide Жыл бұрын

The 835/935 uses completely different chokes than the 930 or 940. The 835/935 are a long neck design unique to that gun where the 930/940 are compatible for the 500 and various other Winchester and browning shotguns.

@corysnladventures2758 Жыл бұрын

@@TheNewHuntersGuide did Mossberg ever bore out any other shotgun model to 10 gauge like the 935 Magnum model? Or unique to this model only?

@TheNewHuntersGuide Жыл бұрын

@@corysnladventures2758 I don't know of any 10 gauge options, thought at some point I wouldn't doubt they had some in their lineup. They've been making shotguns for awhile!

@TommyboyGTP Жыл бұрын

Have you tested lesser constricted chokes like this, such as skeet and improved cylinder?

@TheNewHuntersGuide Жыл бұрын

No sir I haven't, I do not have any aftermarket ones and I don't hunt with any size, so I've basically neglected that side of the spectrum in use and testing. Its a good idea though.

@TommyboyGTP Жыл бұрын

@@TheNewHuntersGuide It would be a good test to see the difference between the two for clay target shooting.

@TheNewHuntersGuide Жыл бұрын

@@TommyboyGTP I'll see what I can do.

@TommyboyGTP Жыл бұрын

@@TheNewHuntersGuide That's great, subscribed!

@TheNewHuntersGuide Жыл бұрын

@@TommyboyGTP Thanks!

@humorss 3 ай бұрын

those extended choke are somehow just better, I use a beretta extended choke in a m4 and the extended C patterns buckshot tighter than flush IC.

@TheNewHuntersGuide 3 ай бұрын

The further I go, the better the results I see with extended chokes. Though to be fair, not all stock or recessed chokes are created equal. These ones I tested here were from great.

@Hollywood41642 Жыл бұрын

Your barrel is closer to the target with the extended tube.. that's the difference..

@TheNewHuntersGuide Жыл бұрын

Haha, I'll have to move back an inch next time!

@fredfeed4766 11 ай бұрын

The test seem to show that "modified" chokes were better and that full was a wash. Not sure why

@TheNewHuntersGuide 11 ай бұрын

It really depends on the chokes. More testing has shown consistent gains with full overall over modified. But every choke could perform differently.

@pedrojsanchezalvarado5569 2 жыл бұрын

🇪🇨🇪🇨👍🤝

@TheNewHuntersGuide Жыл бұрын

Thanks

@dustbustr91 Жыл бұрын

i think it needs to be stated that the only real improvement was for modified chokes!!!!!!!!!!!

@TheNewHuntersGuide Жыл бұрын

It's a fair point. I have some stuff coming, way better testing than this. It's going to be much more definitive I do believe.

@marshprowler2739 Жыл бұрын

What you are failing to compare is the actual constriction of the choke ie Bore size vs actual constriction. Extended this, ported that, X constriction (IC, Mod, Full) is meaningless. Mid range, Long Range etc is another bunch of marketing garbage. Many choke manufacturer's, in the fine print, state that it is an equivalent size rating. A Carlson “Mid Range” is dead in the middle between an IC and Mod in a factory Maxus II.

@TheNewHuntersGuide Жыл бұрын

Hi thanks for the feedback. I am half following you. Give me some numbers so I can make sure I am tracking with you. Do you mean focusing on say a 0.715 constriction vs the stated choke note as "Mod".

@marshprowler2739 Жыл бұрын

@@TheNewHuntersGuide Choke is the difference between the bore diameter and choke diameter. So it looks like your gun has a nominal bore size of .730. Using Carlson example, the Bone Buster Mid Range is a .705 diameter which equals .025 constriction (Imp Mod), the LR is .690 which is .040 (Ex Full) and has steel shot restrictions. (If your factory “Full” doesn’t have steel restrictions, it most likely measures Imp Mod and patterns lead as such). Cremator MR is a .715 which equals .015 constriction (light mod) and the LR is .705, same as Bone Buster Mid range. A Briley BlackCloud Mid range is .020 etc. In my Super Back Eagle 3, NO aftermarket choke can touch the factory IC and Mod from 0-40 yards. You can look at some patterning I just did on my channel. The Maxus II wasn’t impressive with anything I already had, so I measured all of them, then ordered one based on actual constriction that should work with an SPECIFIC shell/load instead of name or “range”. P.S. I’m a competitive skeet shooter and am extremely familiar with testing chokes, barrel regulation POA/POI. Keep up the good work! I decided to try those Boss shells after checking out your channel.

@TheNewHuntersGuide Жыл бұрын

@@marshprowler2739 I follow you. Thanks so much!

@consumertester5665 Жыл бұрын

Do you have to shout?

@TheNewHuntersGuide Жыл бұрын

Haha, I'd rather be too loud and animated with viewers turning down the volume than to be subtle and subdued with not enough energy to interest anyone.

@dustbustr91 Жыл бұрын

yes. he shoots a lot. iykwim