The New Line of Fusion Tablesaws Overview | Laguna Tools
Рет қаралды 72,085
Күн бұрынThe new Laguna Fusion Tablesaws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With completely redesigned trunnion and arbor controls that focus on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years.
Explore Laguna's newest line of Fusion Table saws: bit.ly/3k5O2mR
Subscribe to our email list for sales and promotions: bit.ly/2tJ3LT1
►Contact us for more info: bit.ly/35UqV6M
►Subscribe now: bit.ly/2r5Czgc
►Instagram: bit.ly/2mph6wt
►Facebook: bit.ly/2qiHpXi
@user-hs9pi1rq3c 2 жыл бұрын
*Perfect band saw for the hobby enthusiast **MyBest.Tools** Easy to set up and square. 😂😀😂😀Had it😎 running in 10 to 15 minutes. Quality of cuts will depend on the🤣🤣🤣 quality of the blades.*
@LagunaTools 2 жыл бұрын
This video covers 3 different models, each with a different size motor. The Fusion F1 has a 1.5 HP 110 volt motor, 18.8 FLA (full load amps). The Fusion F2 has a 1.75 HP 110 volt motor, 22 FLA on 110 volt or 11 FLA if switched to 220 volt. The Fusion F3 has a 3 HP 220 volt motor, 17 FLA. Thanks!
@pf5658 3 жыл бұрын
You didn’t mention how beautiful looking these saws are too. Wow! When I buy one I probably wouldn’t want to use it but just have it as a piece of art. LOL...
@amandaharlan6808 4 жыл бұрын
I've been using the original Fusion model for three years and still love it. Great saw for me. Nice to see them beefing up those weak little roll around wheels. And the table top dust collection throat is long overdue.
@MrHandwerk 5 ай бұрын
Thank for the Video! :)
@fantasyforge9312 4 жыл бұрын
Nice to see more quality products from Laguna
@BearCreekWoodworking 4 жыл бұрын
These are Cool!
@mmcfreds 4 жыл бұрын
I’m picking up my new F1 tomorrow!
@P010010010100101 4 жыл бұрын
Yesss!
@ArmyVet76 4 жыл бұрын
I love my Fusion 2. I will be switching out my others for Laguna products. 👍🏼
@juanjacobo36 4 жыл бұрын
Does your fence flex if apply pressure in the back?
@garyknable1155 4 жыл бұрын
Looking forthe Fusion 3 vids now :-D
@lastchancecris 4 жыл бұрын
Gary Knable I’m looking also and can’t find anything anywhere !
@shanesmith5405 4 жыл бұрын
When will the deep dive on the Fusion 3 be out? This saw looks the goods, would just like to find out a bit more before it hits our shores(Australia)
@LagunaTools 4 жыл бұрын
Hi Shane! Planning to finish editing this Friday! Stay tuned!
@Ramsdl52 4 жыл бұрын
Does the euro fence system allow for the wing nuts to be mounted on the left side (blade side) of the fence so that you can install a router table and use the included fence system on the right side of the table?
@LagunaTools 4 жыл бұрын
Hi, Dustin. Please contact customer service for product questions. Thank you.
@lwoodt1 3 жыл бұрын
The fence is a take on the old Delta Unifence.
@stuffsethmakes 4 жыл бұрын
PLEASE tell me we can put that dust collecting good on the original Fusion??
@LagunaTools 4 жыл бұрын
Please, give us a call. Our service devision says there's a kit available, but they'll need more information from you.
@juanjacobo36 4 жыл бұрын
The fence flexed at the back with minimal pressure on a floor model... I am worried this is a common issue on these saws. Laguna can you tell me if this is an issue?
@LagunaTools 4 жыл бұрын
Hi there, please contact our customer support for product questions. Thank you. 1-800-332-4094 or lagunatools.com/contact/
@crmcbrideww 4 жыл бұрын
I'm glad you're working on dust collection on the new models. To be honest, you guys should be embarrassed about the first generation's dust collection. Personally I hate my Fusion but I'm stuck with it.
@lastchancecris 4 жыл бұрын
Laguna Need to do more Fusion F3 Videos.
@LagunaTools 4 жыл бұрын
We're working on those at the moment!
@lastchancecris 4 жыл бұрын
Awesome !! It’s greatly appreciated, I’m currently on the market for a new table saw and really like the way the new F3 looks. Is it compatible with a table slide for sheet goods ?
@LagunaTools 4 жыл бұрын
@@lastchancecris We do not currently offer a sliding table attachment. There are some aftermarket attachments but you will need to check that the bolting is compatible.
@lastchancecris 4 жыл бұрын
@Laguna Tools Thank You for the Reply and Help... I will keep checking back on the website and KZfaq for more info as it’s available. Love the Laguna product line, Thanks Again.
@EricBlanchette 4 жыл бұрын
When will these be available in Canada? Thanks!
@LagunaTools 4 жыл бұрын
Today! It ships from our US warehouses and might take some time though.
@EricBlanchette 4 жыл бұрын
@@LagunaTools It's not available apparently. :-(
@EricBlanchette 4 жыл бұрын
@@LagunaTools Is there an ETA?
@LagunaTools 4 жыл бұрын
@@EricBlanchette F1 is in stock, F2 ETA - 12/10/19, F3 - 10/25/19, F3 52 - 2/12/20. Hope this helps!
@jamesnastulski2664 4 жыл бұрын
@@LagunaTools are these firm dates? I'm looking to purchase the F3-52. I noticed on the BIS (beaver industrial supply) website that I can buy the 52" extension separately. So with the F3 available now, I could just get the 52" extension separately with a possible wait correct? Would I be missing out on any option if I went this route?
@btrswt35 3 жыл бұрын
The trunnions weren't really shown. That's like the working heart of these kind of table saws and I would have preferred to see more of how the motors were mounted.
@LagunaTools 3 жыл бұрын
Thanks for your feedback. We'll keep this in mind for future videos!
@robertcsatlos1198 3 ай бұрын
azért egy tolóasztal már illő lett volna hozzá ilyen áron
@ltdann86 4 жыл бұрын
Where's a video for the F3 assembly just bought one and the directions are for a F2 LOL.
@LagunaTools 4 жыл бұрын
Hi there, here are the videos for the F2 kzfaq.info/get/bejne/oqednJdmttuocYU.html kzfaq.info/get/bejne/nZmbdbJ1ptyWnI0.html
@ltdann86 4 жыл бұрын
@@LagunaTools Need video for f3 NOT f2 Completely different fence system.
@ltdann86 4 жыл бұрын
@@LagunaTools Not F2 the F3 I need. Completely different fence system.
@ltdann86 4 жыл бұрын
Not even enough bolts for the front and rear supports.
@LagunaTools 4 жыл бұрын
@@ltdann86 Here you go, kzfaq.info/get/bejne/q5mDlMdhz7WYnI0.html
@Muhssin3521 3 жыл бұрын
هل لديكم فرع في العراق او توصيل?
@reddragon-mu5jl 3 жыл бұрын
صديقي هذه شركة امريكية وسعر المنشار الf1 اعتقد ١٢٠٠ دولار والf3 بحدود ٣٠٠٠ دولار ولازم تشوفلك شركة شحن بحري بالعراق او ممكن تحصله بالسعودية او بالكويت اكتب بالنت lagunatools ويطلعلك موقعهم كلشي بي حتى الاسعار فد شي هاي الشركة عندهم سي ان سي ليزر يمكن سعرها ١٥ دفتر
@Muhssin3521 3 жыл бұрын
@@reddragon-mu5jl صديقي الكريم شكراكثيرا على توضيحاتك.💝
@allan.moeslund 3 жыл бұрын
I really like the Laguna tablesaws. But the price in Denmark is to high compared with the price in US.
@robertcornelius3514 3 жыл бұрын
That's really sad. The Globalists have lied to us again.
@siriosstar4789 Жыл бұрын
don't know about Denmark but here in germany the price is pretty much the same .the European distributor for Laguna is from IGM tools in Prague. the saws are imported directly from Taiwan so any price difference is due to country by country duty/import tax.
@allan.moeslund Жыл бұрын
@@siriosstar4789 Thank You for the information. It is clearly cheaper to shop directly from IGM Tools than from the Danish shop there has this saw.
@Momoka7 2 жыл бұрын
Specific for the F1 is cheap plastic cranks to raise/lower and tilt the blade. I not really get why the F1 not has the same metal cranks like the F2 and F3 has. But... I guess the F1 is not meant to be bought... just there to show "hey! we have a low price model too!" when it really just screams that you should probably spend $500usd more bucks for the F2.
@darkides 3 жыл бұрын
too bad the back order is like 6-9 months
@noahcantrel4025 3 жыл бұрын
You don't mention the horsepower!
@LagunaTools 3 жыл бұрын
Hi there! The horsepower varies by machine as such: F1 Fusion - 1.5HP, F2 Fusion - 1.75HP, and F3 Fusion - 3HP
@tmrmilano 3 жыл бұрын
@@LagunaTools Thanks, it would be nice to include the HP in the body of the video; I consider that to be a pretty important spec.
@LagunaTools 3 жыл бұрын
@@tmrmilano Taking note of this for future videos! Thanks!
@robertcornelius3514 3 жыл бұрын
@@tmrmilano , no sh#t, right.
@robertcornelius3514 3 жыл бұрын
Will these end up getting the same poor ratings as your lathe?
@mikeo759 3 жыл бұрын
Honestly, woodworkers don't need all their fingers
@LagunaTools 3 жыл бұрын
That's why we have 10 right 😂 you have room for 9 mistakes!
@robertcornelius3514 3 жыл бұрын
@@LagunaTools , love your sense of humor.
@T.I.M.5 3 жыл бұрын
Trying to listen to your spokesman but the music is really distracting. So moving on
@LagunaTools 3 жыл бұрын
Taking note of this. Thanks for your feedback!
@user-vi3zj7qt8w 3 жыл бұрын
Купил такую laguna f3.... ничем не отличается от любой китайской пилы, еще и копмлетация пришла без раскинивающего ножа и с обычной крышкой защиты самой простой, как на дешевых пилах.... Я, короче, разочарован, что купил, чуствую себя обманутым. Обыкновенная китайская пила.
@ksmith8477 3 жыл бұрын
Нож не входит в комплект, он продается отдельно lagunatoolstest.com/product/accessories/tablesaw-accessories/knives/thin-kerf-riving-knife-for-fusion/ Страна производства - Тайвань, дизайн - Калифорния.
Nomad Makes
Рет қаралды 28 М.
Wrecker
Рет қаралды 516 М.
FISPECKT
Рет қаралды 206 М.
xunyu
Рет қаралды 1,1 МЛН