No video
The Super Easy TV Stand - DIY Project
Рет қаралды 1,402,943
Күн бұрынPLEASE CHECK OUT OUR BOOK! (Amazon link): amzn.to/35VwJwi
TOOLS LIST (Amazon links):
-Miter Saw: amzn.to/2FX0dyt
-Drill and Impact Driver: amzn.to/2HbVNTO
-Tape Measure: amzn.to/2G1KDBC
-Safety Goggles: amzn.to/2tjZR2x
-Ear Protection: amzn.to/2oNHTke
-Mask: amzn.to/2tgFjHS
MATERIALS LIST (Amazon links):
-3/4" Galvanized Pipe (5"): amzn.to/2HfNkU5
-3/4" Galvanized Floor Flange: amzn.to/2HiEroI
-Stain: amzn.to/2qV9GSF
-Poly: amzn.to/2rYj2x0
-2 1/2" Screws: amzn.to/2sKXoJ6
-1 1/4" Screws: amzn.to/2saK3gw
-Sanding Block: amzn.to/2rEkGBi
-Pre-Stain: amzn.to/2saKhEo
(Partial list, remaining items found at hardware stores)
[affiliate]
OUR SOCIAL MEDIA:
-Instagram: therehablife
-Facebook: therehablife
-Pinterest: www.pinterest.com/therehablife
-Snapchat: TheRehabLife
@bertdavis9626 5 жыл бұрын
This was exactly what I’ve been looking for since the prices for large screen tv stands is outrageous. Us folks with only basic carpenter skills are very appreciative.
@kaciesonya6363 Жыл бұрын
This is a valuable addition to my woodwork collection kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
@Bears850623 3 жыл бұрын
I have zero carpentry experience. Don’t even know where to start. What to buy. The tools. Nothing. But I want to teach myself this trade along with plumbing to teach my son one day and this video gave me confidence to even think to start doing it. Thank you for your thoroughness and your channel
@sharonwilliams5560 2 жыл бұрын
This is unbelievably perfect. I drew out what I wanted, and looked for a DIY and here it is. Thank you
@EvilSammy 2 жыл бұрын
I did this while laid off last year. Followed all instructions exactly, and the result is amazing and has garnered many compliments.
@laynesmith1439 7 жыл бұрын
Saw this video, went to home depot, bought everything went home and built it and I couldn't have been happier with the out come!
@alexmontenegro9489 4 жыл бұрын
Layne Smith about how much was everything?
@tomjens2046 3 жыл бұрын
how long it tok to build?
@zappadrew7749 3 жыл бұрын
Same... went to Home Depot.... they’ll even cut the wood for ya at no cost. Bought everything except the stain and poly. Cost me $108... with the stain and poly would’ve been about $120. The wood was about $53. The floor flanges were about $25. Two boxes of screws almost $20. And the two pipes were like $8 total. With the wood already cut to the sizes needed, you can put the whole thing together in roughly an hour.
@jestaman3356 4 жыл бұрын
Just finished making it. First woodworking project I’ve ever done in my life. I must say, the video makes it look so easy, but beware it is very time consuming and can have many obstacles a beginner doesn’t think of. Make sure you pick out very flat wood, because one of my pieces was slightly curved and to the naked eye I didn’t pick it up, so I had to figure out how to level the wood. Overall, simple design and anybody can do it if they have patience. Thanks for the video!
@flareeyt2295 3 жыл бұрын
how much did the total come too
@jestaman3356 3 жыл бұрын
@@flareeyt2295 Wood was about $50 for me, rest of the supplies was probably around $30 or so (I have a lot of left over supplies though for other projects now). I'd say depending on what you need between $60-$90 total. That's a really rough estimate!
@tomh1895 5 жыл бұрын
Excellent! Made it in a weekend, mission oak stain is really nice, very strong and decently heavy. absolutely love it in the bedroom.. cost me $90 for everything at lowes- mostly the lumber and 4 black iron pipe flanges are $25
@txvetdan1700 5 жыл бұрын
found the flanges on amazon for a set of 10 for 11.99 ….. I read this and looked around before spending 25.00 for a few of them. Thanks for sharing
@laserfalcon 6 жыл бұрын
Nice project, ten times stronger and much more durable and well built then the cheap crap you see in many stores
@thaliapompeu8145 6 жыл бұрын
LaserFalcon
@supersayainjesus7204 6 жыл бұрын
I doubt this will last much longer than the cheap stuff. Screws don't offer good strength and durability. It does look better though.
@trieucao2328 6 жыл бұрын
Cheers for this, been searching for "woodworking plans high chair" for a while now, and I think this has helped. You ever tried - Yiyli Yeyavid Booster - (do a google search ) ? Ive heard some interesting things about it and my m8 got amazing results with it.
@supersayainjesus7204 5 жыл бұрын
@Samuel Sutton Please point me to where I said anything about nails. . .
@BringBackAuntJemima 5 жыл бұрын
Well done, a tip for drilling holes to a certain depth: put a piece of tape on the bit to mark exactly how deep you need to drill the holes. Hope you see this!
@ronaldcopeland3679 6 жыл бұрын
I just finished this project, turned out beautifully. Thank you for making these videos!
@ryanrude6472 Жыл бұрын
Roughly how much dod all the materials cost you? If you dont mind me asking
@MrNickillar 3 жыл бұрын
I don't have even a lick of woodworking skills, but I decided to try it out. It came out better than I imagined! Thanks for the tutorial!
@rey11able Жыл бұрын
This is so much more value for money than a gas furnace. Very economical, very easy to use.
@matthewklitzke2970 5 жыл бұрын
Thank you for making this! I’m currently looking to remodel my room. I tried looking online for a good stand, but they were all too expensive for me. This looks spectacular and it has that special quality in that you made it yourself. Can’t wait to make this, keep up the good work!
@TheRehabLife 5 жыл бұрын
Thanks! We use standard pine...good luck with the build!
@ruralheroes4183 5 жыл бұрын
same here dude
@tonyforde2554 Жыл бұрын
Thanks for the great video. It was a pretty easy build for a guy with rather limited skills. I did have a few snags. Most of the boards were not true so I had to add adjustable appliance legs to level it. I had to have the boards cut at the store as my miter saw is not the sliding type. I did not notice that he did not cut 2 of the 2x10 boards to my requested length, so I ended up with 2 at 48 inches and 2 at 47 3/4 inches. I improvised and made it work. I might suggest using a ratchet instead of the stubby screwdriver to attach the pedestal to the base. That made it quite a bit easier. Thanks again
@mr_Vibez007 3 жыл бұрын
I literally just got done building this. It was a great, and quick project! Thanks for the guidance and idea!
@mr_Vibez007 3 жыл бұрын
I’m a subscriber for life!!
@hyfyre8960 6 жыл бұрын
Love the stand. Made it for my wife for an anniversary gift thanks much!!!
@TheRehabLife 6 жыл бұрын
Awesome, glad it worked out well!
@bostonpops33 2 жыл бұрын
Congrats on the sex.
@rspivey53 5 жыл бұрын
I like your channel. I'm going to try to start a wood shop. You have good ideas and the best thing is you give step by step instructions. Thank you from Columbus Ohio
@ZeeButsog 4 жыл бұрын
Wow, just like you said simple and easy. This is the best tv stand cabinet DIY ever!!! A lot of DIY videos I’ve seen and most of them are complicated and yet they say on their video easy...but there not. This DIY VIDEO is the best!!! Thanks for sharing this
@xomo7944 7 жыл бұрын
Yay!!!! I made the industrial shelf unit but with 6 shelves as a bookcase and now I can make this to match!!! Super excited! THANK YOU!!!!!
@jasonfehr9175 5 жыл бұрын
2x12s can be fairly pricy and a lot of places will only sell you 16ft pieces, the metal pipe for the top shelf is cheap but the flanges can cost up to $5 ea. Other than that it’s pretty cheap to make and I got it built and stained in about an hour and a half
@PProgress28 6 жыл бұрын
Building this as we speak. Using an Ebony stain and clear gloss minwax poly. Looks nice. Gonna do my second coat tomorrow morning and finish it up tomorrow afternoon!
@TheRehabLife 6 жыл бұрын
Sounds like you're about done, thanks for watching and enjoy the new stand!
@PProgress28 6 жыл бұрын
We love it. My wife wants a king sized bed frame now. Lol
@annamassa4770 6 жыл бұрын
Phil Green how much did the material cost?
@SweredaLife 6 жыл бұрын
My husband made this for me for my birthday! And i love it! Thanks for posting the video!
@TheRehabLife 6 жыл бұрын
Glad you like it!
@SuperPonco 6 жыл бұрын
Terima kasih atas ilmunya (Indonesian)
@morgjg2004 5 жыл бұрын
Love all your builds I actually did one of the coffee tables came out more sturdy & cheaper than the one I had. This TV stand will definitely be my next build. Keep it up you guys are awesome
@TheRehabLife 5 жыл бұрын
Thanks!
@Lourelasagero 2 жыл бұрын
Love this video especially for a beginner like me, it really helps a lot from choosing a size of wood , screws etc. And this piece looks very simple to make and yet very beautiful . ❤️❤️❤️
@Rebel1280 6 жыл бұрын
going to put it on some casters like your last project and it will give it a more industrial feel, really dig yalls ideas.
@TheRehabLife 6 жыл бұрын
Oh cool, that would look awesome! Thanks for watching!
@nickwilliams1065 5 жыл бұрын
At last!!! A video that shows you how to build something useful, with out some computer generated voice over or some boring old lectures from some industrial unit/workshop owner kitted out with tens of thousands pounds/dollars worth of machines. Most of us have access to a chop saw and a drill and would be able to build some thing like the unit you just built. Now I am going to check out the rest of your videos see what other gems you have hidden away. Thank you keep up the good work.
@TheRehabLife 5 жыл бұрын
Thanks so much! Our goal was to make DIY accessible without having every expensive tool in the book. Hope you enjoy the rest of our channel!
@Jkcreswell 5 жыл бұрын
I used to have one of those cheap TV stands from Wal-Mart. My furbaby kept peeing on the edge of it and it started to crumble. This is THE BEST tutorial! I built this on a Saturday morning. The only thing different I did was I added pipes and flanges to the bottom for legs. Ya'll are awesome!
@livandcompany 4 жыл бұрын
Best tutorial I've ever seen.
@godsun316 5 жыл бұрын
You're the man!!! I watched this then went to home depot and got everything. Came out great!
@TheRehabLife 5 жыл бұрын
Awesome! Glad to hear it turned out well...
@nickbarnella3451 4 жыл бұрын
How much did the parts cost?
@proverbs2522 2 жыл бұрын
Will be making for our stand so we'll see. Color is not the color I want but still. And another shelf on top for books and DVDs so my spouse can keep his tv hanging on the wall. Good job and thanks for all the info I had screenshot through it. Thank you for posting this. Thumbs up
@KetziahTorah 5 жыл бұрын
Built mine yesterday! I did a couple of modifications. Came out beautifully!
@TheRehabLife 5 жыл бұрын
Awesome, glad it turned well!
@KetziahTorah 5 жыл бұрын
I look forward to watching more building from you! I've subscribed!
@msjoy2005 5 жыл бұрын
Cassandra Bowens what did you do to it?
@danalaniz7314 2 жыл бұрын
Really nice build and especially appreciate how clear and concise the instructions are. I bet that sucker is heavy!
@GarfieldHiscock 4 жыл бұрын
Doubled this up for two layers and made a stereo stand. Used 2 pieces of 3/4” for the middle shelf.
@RonBandit8 3 жыл бұрын
Do you have a picture?
@GarfieldHiscock 3 жыл бұрын
@@RonBandit8 can't upload photos through Comments.
@PlantBasedPachyderm Жыл бұрын
Watched at 2x speed. Much better. Even the song is better at 2x! Good looking work!
@onewaytosavetheday 5 жыл бұрын
This looks so excellent. It inspired me to come up with a simple industrial side shelf to store my consoles, games, and dvds to go alongside it.
@J_ay_Z 4 жыл бұрын
came out great, easy to make slight variations as well like different height or wider boards to create a lip
@m-jayjuma634 6 жыл бұрын
Thank you so much, i have followed your steps and i have a very beautiful rustic tv table now but i made it 65 instead of 40 Again thank you so much
@TheRehabLife 6 жыл бұрын
Thanks for watching!
@drutgat2 4 жыл бұрын
Did you make the depth different? I am making this for a 65" TV, and was thinking that I would get rid of the recessed upper level, and perhaps make the whole thing wider (I am also going to add a level).
@RetiredTony 7 жыл бұрын
WELL DONE...moving to a new place in San Diego with my son and im gonna build alot of stuff i learned from you guys. Thank you for sharing
@blackheartAA 7 жыл бұрын
Me gustan sus proyectos porque siento que es algo que de verdad podría hacer yo: sin muchas complicaciones y sin demasiada tecnología, pero un excelente trabajo. Gracias y saludos desde México
@llldAdAlll 5 жыл бұрын
I just finish up mine i went for bigger dimensions since i had to fit a 55 inch tv i did a 6f wide and the top part 5 ft .. i wish i could post a picture . Thanks for your ideas 👍🏼👍🏼🎉
@corneleousworthington4566 6 жыл бұрын
Thank you so much for posting this! Just built mine (without the riser top), and it is looking great in my living room, supporting a 55" flatpanel TV. Awesome stuff!
@TheRehabLife 6 жыл бұрын
Thanks!
@tomjens2046 3 жыл бұрын
how long it took?
@corneleousworthington4566 3 жыл бұрын
tom jens maybe a couple days including the finish.
@tomjens2046 3 жыл бұрын
@@corneleousworthington4566 wow, I assumed this was something like 4 hour build. My spirits are down :)
@corneleousworthington4566 3 жыл бұрын
tom jens well, I’m admittedly slow with finishing... literally a couple hours to build it unfinished. For me, I pre stained, stained, and polyurethaned 3 coats. Each takes time to dry, and there’s sanding in there too- that’s why it took me so long. Build one, you’ll love it!
@frankcavazosjr.5903 7 жыл бұрын
Just can't get enough of you guys, Both you all rock!! & little doggie too. Thanks for sharing this easy project.
@skymusic29 7 жыл бұрын
I like it, very nice. I think I would add a 5" board in between at the rear and hide the wire. Awesome job.
@NicoleBest 4 жыл бұрын
I am in the process of making it. All pieces cut and ready to go, tomorrow. Can't wait to finish. Thank you for posting. :-)
@KatieMQ 7 жыл бұрын
Both of you are amazing! I was wondering if you could show how to make a desk. I made the rustic coffee table and I would love to make a desk that would match with it.
@mitchellthurner5980 4 жыл бұрын
First woodworking project. I'm attempting to make this, only bigger to accommodate my TV. Wish me luck!
@user-xm4lc7sd7q 6 жыл бұрын
Вот если надо что, то к вам сразу на канал посмотреть, что и как производится, как обычно красавчики и молодцы!!!
@LeonardoAguilar2020 7 жыл бұрын
Congrats on this beautiful TV Table was looking for this. Thanks for all your videos great job the 2 of you. wishing you the best on all future endeavors.
@wwecenahater2012 7 жыл бұрын
Leonardo Aguilar Okay John Laurinaitis
@AB-nu5we 7 жыл бұрын
Doug Fir for the big base. Good tough stuff. Nice project.
@Christ89Camire 6 жыл бұрын
DONE ! Look so nice on my cinema room 🤜🏻🤛🏻
@TheRehabLife 6 жыл бұрын
Awesome!
@dcpickles1 4 жыл бұрын
Very nice video, but I'm confused. If you put two of the 2" x 8" x 48" right next to each other, wouldn't those combine to be 16" wide? How come those vertical pieces are only 14 1/2" long then? Wouldn't they need to be cut 16" long to be flush on the ends?
@subxeroarcher 3 жыл бұрын
The dimensions of the lumber aren't quite what they say. 2x8 is the nominal dimension but it is actually 7.25 inches wide.
@josenewtoncostacosta8079 Жыл бұрын
Wow very good!!! Dear friend, very easy to make, tomorrow I start making one.💖👏👏👏👏
@ShastaHawk 7 жыл бұрын
That looks like a great but simple project. I would improve it by adding casters and a couple adjustable shelves.
@austinberry6739 4 жыл бұрын
I’m a painter and you actually want to stain all of that before hand, makes things a lot easier🤷🏻♂️
@austinberry6739 3 жыл бұрын
Jay B You don’t have to, it’s just easier doing it beforehand so you don’t have to worry about excess stain in corners and getting tight spots etc
@gatanner1 3 жыл бұрын
Just made it and I completely agree. I actually missed staining one edge on the bottom stand portion. It’s on the inside of the wood so you can’t see it anyway but still. I also added caster wheels to the bottom so I can roll it around. It looks sweet.
@hogs_agriteach8998 2 жыл бұрын
Thanks Austin. Good tip 👍
@tonyz6421 Жыл бұрын
You can do it either way
@mikeleseberg326 6 ай бұрын
I followed along and completed my first ever woodworking project, it’s not perfect but I learned a lot. Thanks for the inspiration.
@ahmedkanja1410 4 жыл бұрын
awesome. The fact that you gave the measurements, thanks
@dallascowboys0973 4 жыл бұрын
I like how they don't use all kinds of fancy tools and the projects look great
@theronsjogren5029 4 жыл бұрын
Just finished mine. Turned out amazing
@2112andy 8 ай бұрын
Hey thanks for making this video! I made a table that you made, and it turned out AWESOME! Going to make this next!
@OfficeIcarusLLC 4 жыл бұрын
0:50 _'...two pieces 5 /12" long'_ .. that actually made me flinch, *bravo*
@tayeallen8528 4 жыл бұрын
That's nicer then anything you'll find at Wal-Mart
@cliffordmanohar9553 2 жыл бұрын
Simple and neat, perfect for a TV stand. Thank you very much!
@seanarnstein9263 5 жыл бұрын
instead of using a little screw driver you could also get a right angle attachment for your drill
@Jkcreswell 5 жыл бұрын
OMG the little screw driver drove me nuts! AFTER I finished the project, I went to Home Depot and bought me a right angle attachment, for future builds ;)
@lamiabibi1349 7 жыл бұрын
c'est fabuleux ce que vous faites tout les deux, j'adore
@nicksanches64 5 жыл бұрын
I built this today, made it a little bigger but same idea, great video
@TheRehabLife 5 жыл бұрын
Awesome, glad it turned out well!
@sxxkkllmmmclean7894 3 жыл бұрын
Great video I'm going to build this for a 75" tv with the feet on the top put a shelf in the middle. Thanks!!
@jimmytrue1181 5 жыл бұрын
excellence idea ,cheap, easy, strong and last longer. much better then buy one at the ikea . thanks
@123busaboy 3 жыл бұрын
Awesome job, I am going to make this next week and send you pictures!
@txvetdan1700 5 жыл бұрын
I am going to use the kreg jig on this one for the top portion. Going to get started today...… Thanks
@katherineallen4387 7 жыл бұрын
i just love yall...thanks for sharing loves...can you do a corner shelf/bookcase for me? i keep messing it up badly
@samlemma 4 жыл бұрын
My wife and I built this TV stand today. Great Video. Would love to share pic of our work ---
@kapierayfabrice6878 6 жыл бұрын
Félicitation d'un ébéniste amateur Français , ce qui compte c'est le résultat
@Isamaria019 7 жыл бұрын
Very nice!!!! I really like the colour of the stain!!
@aliaissa9932 6 жыл бұрын
Isabelle_diy lp
@coachtjp3362 7 жыл бұрын
Just built this thing and its awsome! Keep it up!
@ryanhardy3133 4 жыл бұрын
Thank you for a great video! What type of wood did you use for this project?
@jeanellis1751 4 жыл бұрын
BEAUTIFUL WORK AND STAND!
@ChrisJohn726 4 жыл бұрын
This thing is fantastic. Just finished as my first (now, of many) house wood working projects and it came out perfect! I’ll need to work on my stain/sand skills a bit but this video and your step by step instructions were so very helpful. Thanks!
@TheRehabLife 4 жыл бұрын
Yay! Thanks for watching!
@missstarr682 7 жыл бұрын
Hey Rehab Life! Huge fan in Dallas, TX. I enjoy and have learned a lot watching y'alls tutorials but one thing I noticed is that y'all don't use wood glue. I'm just curious why y'all don't use it to further adhere y'alls fabulous creations. Thanks for the feedback and for all the great work y'all produce. Keep up the good work!
@mrharyjessica 3 жыл бұрын
Why do you guys spray the saw dust omfg as a wood worker I have OCD about that please get a hose shop vac system setup especially with that outlet right there. Legendary channel I’m just saying and also love the pupper 😩
@mr.chavez3093 6 жыл бұрын
This was an awesome video. I would personally prefer to use bolts, washers, and nuts to instead of the nails to hold that together. (At least for the top shelf). I would not want bolts to show through the bottom and scratch my hardware. I am a DiYer but never have attempted woodworking just yet. By the way, I like the fact that your significant other builds the shoe (Laughs) rack; girls gotta have their shoes and we have to have our TV stand. My game systems and receiver would be a great contrast to that style. Time to share these vids with my wife and start planning our builds. Liked and SUBSCRIBED!!! THANKS!
@hifonics079 6 жыл бұрын
This is my second project that i made and it became awesome. 👍 thanks for the ideas.
@TheRehabLife 6 жыл бұрын
Awesome, thanks for following!
@DZenitram23 6 жыл бұрын
I made this stand all in all 147 total that's with a mask n brush included unfortunately the store made my cuts they weren't even but I made the best of it also my 55 t.v. did not fit so I had to leave the top shelf off but I'm using it with the extra wood to make a corner stand and with longer pipes should be nice THANKS FOR YOUR VIDEO gave me a lot of ideas and confidence to do my own thing straight or not at least I'm making it and it's solid.
@vivimu 6 жыл бұрын
DZenitram23 147....dollars? holy hell that's expensive
@shivbam8661 5 жыл бұрын
Beautifully done. I really like handmade things
@arontouchet1945 4 жыл бұрын
You should have got you a cordless screwdriver to where it bends but it looks really good
@scotthaskins9175 3 жыл бұрын
Lovely job mate. Like it. Pup at the end made it! 😂👌❤️
@dorianwilson4559 5 жыл бұрын
Awesome video and the song is amazing.
@nicolasfredette8564 6 жыл бұрын
cool, easy and sturdy design !! I'll build this and add a couple more shelves on the right half of large bottom part to fit my bluray player and console !
@TheRehabLife 6 жыл бұрын
Sounds like a great plan, enjoy the new TV stand!
@AtGodsfeet35 2 жыл бұрын
Nice work bro!
@TheRehabLife 2 жыл бұрын
Thank you! Cheers!
@87KING13 4 жыл бұрын
Great video! Very clear and concise.
@billiejl6237 5 жыл бұрын
Great project- wheels instead of a footer for me. Easier to clean and locate long lost pet toys!
@TheRehabLife 5 жыл бұрын
Haha totally, Henry has a few toys hiding under our couch fo sho...
@bonniebrickley6544 5 жыл бұрын
Great. Simple and well done thank you
@patriciamanriquez6059 3 жыл бұрын
Love it. So easy. Thanks for making the videos so easy
@donaldduck4867 5 жыл бұрын
I love your channel! The profits are so easy and you explain them so well.
@danielleraichel7495 7 жыл бұрын
I know this is probably so simple.. but can you make a blanket holder/ladder?! And possibly a dog bed???
@michelefiore2705 4 жыл бұрын
J'adore ce que vous faites !! Pour moi c'est un vrais plaisir de regardé vos vidéo
@cesarconh895 7 жыл бұрын
Cool and simple build, excellent. Thumbs up for this one
@dhoodzvillamor934 6 жыл бұрын
Awesome simple design
@cleitonpicoli3333 6 жыл бұрын
Muito lindo este trabalho
@lvmjiron 7 жыл бұрын
The puppy kisses were adorable 😘
@gldngrrrl5574 4 жыл бұрын
this is GREAT. planning on making this and adding wheels. i love all of your projects. would u consider adding the total cost it took to make these projects?
@gldngrrrl5574 4 жыл бұрын
i’m new to wood working and it would give me great piece of mind before heading to the store
This Faithful Home
Рет қаралды 55 М.