#Valve_clearance #Tappet_clearance #Valve_Lash How to tell if you have wrong valve clearance Valve clearance Tappet clearance Valve lash
Пікірлер: 29
@gixxis32649 ай бұрын
Taken ages to find this information in such a forthright manner ; straight to the point & no drivel - Thank You
@tyrotrainer7658 күн бұрын
Very nice video indeed! I've been adjusting valves on and off for 50 years since I started driving/motorcycling and I've always adjusted way too loose compared to how you demonstrated, the correct method. I'm servicing my diesel generator tomorrow, post break-in; this includes valve clearances. I'll be interested to note any differences in engine noise when I finish. Thanks for the video, very helpful.
@TheAbJGarage7 күн бұрын
Thank you very much!!
@AutoDiagnosticsPK21 күн бұрын
Thankyou very much Sir.... Load of information, which is usually not available on this particular topic Stay blessed ❤❤❤
@BC-wg5pq15 күн бұрын
Great vid ty
@5minuteprojectideas Жыл бұрын
Nice. Thank you for sharing.
@rachelmadrone316823 күн бұрын
Very helpful!
@TheAbJGarage21 күн бұрын
Glad it was helpful!
@jeeromonster10 ай бұрын
Very informative video buddy, thank you.
@TheAbJGarage10 ай бұрын
Glad it was helpful!
@rastabathu252611 ай бұрын
Thank you brother
@TheAbJGarage11 ай бұрын
Welcome
@cruisecontrol69386 ай бұрын
Little something I'm going through, if all of your exhaust valve clearances are too tight, keeping the valves noticably open, you will have glowing red exhasut manifold over time. My VQ3.7L vhr is supposed to be between 0.011-0.015... all of them are 0.008 after lapping the valves. Im a rookie
@TheAbJGarage6 ай бұрын
Indeed! Thank you very much for sharing your wonderful experience!
@user-bt4ok7ml5b7 ай бұрын
Well expland
@TheAbJGarage7 ай бұрын
Thank you very much!
@davidgibson6466 ай бұрын
How would oil get in the cylinder from the valves?
@TheAbJGarage6 ай бұрын
Wrong valve clearance cannot directly cause oil leaking. However, if the valve clearance is too tight or too loose, it can cause engine performance issues such as poor fuel efficiency, misfires, and increased wear on engine components. This increased wear can lead to oil leaks over time. Tight valve clearance in conjunction with bad valve seal can cause oil leaking into the cylinders. Wrong valve clearance alone won't!
@mr.knownofficial11 ай бұрын
Hi i have ns200 should i do valve clearance i have run my bike 17000km my ns200 2020 model
@Pratham40s3 ай бұрын
anual suggests every 2nd or 3rd service you have to check valve clearance and adjust accordingly. no service center does it as they are not confident of their work plus they will only do it if there is a sound
@jorgeluna79144 ай бұрын
How can i tell if the valve adjustment was performed in my car?
@TheAbJGarage4 ай бұрын
The only reliable option is to measure the clearance and confirm yourself! If you hear increased tapping obviously the clearance is out of order.
@jorgeluna79144 ай бұрын
@@TheAbJGarage That is what I was afraid of, thanks for the reply.
@nishatkhan57133 ай бұрын
My engine is not starting would it be because of this
@TheAbJGarage3 ай бұрын
I don't think so! Valve clearance issues are not known to cause a no start situation unless they are extremely off, which usually happens after cylinder head reinstallation. Please look for either fuel or ignition related problems, those are known to cause no start situation
@nishatkhan57133 ай бұрын
@@TheAbJGarage what should i do i just did a gov delete and added a flywheel with stock key and carb there is spark and fuel
@nishatkhan57133 ай бұрын
@@TheAbJGarage i checked the valves and the right one was off the rodi pit it back on but did not adjsut it