Carli Suspension Ford Super Duty Stainless - Low Mount - Steering Stabilizer, Installation Video

Рет қаралды 21,587

4 жыл бұрын

Пікірлер: 32

@ricflair2779 3 жыл бұрын

Dan rules. These guys could not have been more helpful when I installed my kit. Their customer service is off the charts and their product offering is top-of-the-line. What a fantastic company!

@thecarlisuspension 3 жыл бұрын

Appreciate you, Ric!

@MTCKIE68 4 жыл бұрын

For suspension upgrades Best Damn Company out there Period !!!

@TW-pq3hn 4 жыл бұрын

I love that you are pumping out videos! Quality was good enough! Thank you!

@bentleealessandro2078 2 жыл бұрын

InstaBlaster.

@ricflair2779 3 жыл бұрын

I’m speechless after driving 1,500 miles with the Carli system on my Super Duty. It’s night and day. Rides like a dream. If you read Carli’s literature and follow their recommendations on wheel & tire size, tire pressure etc. you won’t be disappointed. I’m running both stabilizers set to 200psi with 37 Toyo AT3 and I track perfectly straight, all the stock wheel feedback from bumps is gone, and the feel of the wheel is awesome - hardly notice it’s not stock. I really can’t believe how the truck rides. 100% ride quality improvement.

@calebheddy1447 2 жыл бұрын

woooo!!!

@Mister_X-com 4 жыл бұрын

Very nice! Thanks!

@bencox7439 4 жыл бұрын

I just ordered a sway bar to complete my leveling kit...that would be great if you did a install video and a ride comparison before and after.

@thecarlisuspension 4 жыл бұрын

The sway bar is on the list of things to do!

@JB-hi3uo 4 жыл бұрын

NICE.....

@aguyonmatchcom 4 жыл бұрын

Could the this model of diff cover be safe to use for hydro assist applications?

@beerbelly6670 Жыл бұрын

I have the stock tremor wheels with 295/70r18 toyo tr tires. Only a 1 1/2 level kit. I have you upper steering stabilizer already. What psi should I run in the lower steering stabilizer

@CalvinLaMontagne 3 ай бұрын

I just installed this on my truck exactly how you did in the video, and the shock ripped the threads out of the Hime Joint on the alignment stud. Is this something you guys have seen before?

@islanderson691 3 жыл бұрын

Do you make it for 2017 f450?

@TW-pq3hn 3 жыл бұрын

Dan, for a 2020 Superduty on ridge grapplers do you need the high mount or just the lower?

@thecarlisuspension 3 жыл бұрын

Really depends, if you're going 37 as most of our kits allow, we recommend both. If you're on a budget, we recommend just the lower to compliment the factory upper! This is the "budget" way to run a dual setup.

@edwardchairez9785 2 ай бұрын

Long shot but what can be done if that 17-4 end of the shock breaks in half ?

@CarpePerDiem 4 жыл бұрын

How far does the tie rod clamp need to be rotated down for a 2.5 system? I just installed this on my 17 f250 w/2.5 back country and in order to level the stabilizer it looks as though it needs to be rotated nearly all the way to the 6 o’clock position (all the way down). Is this correct?

@thecarlisuspension 4 жыл бұрын

To level the stabilizer, it's usually to the 7-8:00 position when looking at it from the passenger side.

@kylescaggs8448 3 жыл бұрын

Can this be run without the upper stabilizer? I have a solid axle conversion using a Superduty Dana 60 and am looking at stabilizers and a diff gaurd.

@thecarlisuspension 3 жыл бұрын

Sure can!

@scottlincoln6286 4 жыл бұрын

Dan, does this steering stabilizer work on a stock 2017 F 250 4WD suspension application. Or does the truck have to be lifted for this to work. Carli is the best suspension system money can buy, keep up the good work!!!

@thecarlisuspension 4 жыл бұрын

Hi Scott, This will work on a stock Super Duty. It can likely run in either configuration but i would set it up in the lower (single shear) to be safe.