I wanted to hot foil stamp some suspenders for a friend's wedding coming up, but I didn't have a fancy hot foil stamping machine. I improvised!
Пікірлер: 99
@sixtonshark2854 Жыл бұрын
Thanks for going into so much detail about this, I keep coming back to it whenever I look into doing foil stamping without an expensive press. The boiling water idea is brilliant.
@brandigarnier34235 жыл бұрын
Hi! I found your video during a search for "hot foil stamp how to", because the foil I bought did not come with instructions. And I wanted all the info I could get before doing it on a project. Seems self explanatory to a degree, but I wasn't sure of heat temp, pressure etc. Sooooo...I have custom brass stamps for my leather business and have found an easy way to heat them to a pretty perfect temp for heat stamping with a press. So I decided to try my letter stamps that way too and it works great! It's an electric MUG WARMER! Lol! No kidding. Basically it's just a small little hot plate but the temp probably doesn't reach over 200 degrees, so it's a great inexpensive way to achieve results. I learned by trial and error on scrap leather. Rubbing alcohol worked pretty good too for edge clean up, and I learned a firm quick press is best, not a long press like a brass stamp without foil. So, gosh I wrote a lot, apologies, but I just wanted to share with you what worked for me and to say thank you for giving additional helpful info! Happy leathering!
@cerupsly5 жыл бұрын
That's awesome! Thanks for the note! do you have a video or pics somewhere? I'd love to see it
@ShivAadesh3 жыл бұрын
@@cerupsly Even we would lovveeee to see itt....!! 😀✨
@cerupsly3 жыл бұрын
@@ShivAadesh I've tried this. I didn't get good results. Maybe my mug warmer is too puny.
@ShivAadesh3 жыл бұрын
@@cerupsly ohh.... NP... It's always good to share the experience... And we definitely have other things to cheer... 😎 ... Thanks for the rpl... 🤩
@SheerStitchery4 жыл бұрын
Love this! I like how you explained the temperature it needs to be, this is the first tutorial that explains this. Thanks!
@cerupsly4 жыл бұрын
Sheer Stitchery you’re so nice!!!
@Mrsnunyabiznezz5 жыл бұрын
THANK YOU!! My daughter is getting her boyfriend a leather wrist band that is like 2 inches wide and it is laced up on the sides. It has nothing in the middle and we have been racking our brains for 3 days to figure out a way to put something in the middle, like a band he likes or a song title. It's black leather, like this so just embossing wasn't going to work. Came across this and NOW we can do this. I think you did a hell of a job. Thank you for saving me and my 16 yr old thanks you too!
@cerupsly5 жыл бұрын
Huzzah! Send pics!
@mjulia929 ай бұрын
This video is so awesome!! Imperfections and handcrafted items go hand in hand, and it’s what makes them unique and beautiful. Very helpful video, thank you!!
@heylady21106 жыл бұрын
You are a brave man 😂 but over all it turned out really good I’m impressed .❤️
@patriciaingraldi47192 жыл бұрын
Thank you. That was very helpful especially you working out all the issues you came upon. Great job!!
@Ladyfyre-graphics3 жыл бұрын
This looks really great, it adds to the sentimental value too as you put so much effort and time into it :-)
@AffordBindEquipment3 жыл бұрын
you can plug the soldering iron into a light dimmer and you can then control the temp way down to what you need.
@BornAgain3302 жыл бұрын
Hey buddy I just recently got into leather work bud rebinding Bibles and man I went to hobby lobby and got those “foil sheets” and I guess they need adhesive; it was still a MESS haha and this has been the first video I’ve seen that went into this without need a commercial machine so to speak haha but God bless man and keep on keepin on lol take care
@cerupsly2 жыл бұрын
They definitely do not need adhesive. It’s a matter of putting the foil side the right direction and getting the heat right!
@TheLeathersmithShop5 жыл бұрын
I started off with a wood burner and the optional letter stamps. The more expensive ones have temperature control, but if you already have one without a temp control, you can go to home depot and get a light switch dimmer for like $5. Just plug your burner into the switch, plug the switch into the outlet, then adjust the switch until you get the right temp. Use pliers to switch out the letters and they heat up in less than 30 seconds, so no waiting.
@cerupsly5 жыл бұрын
Oh great idea!
@clairemeacham57924 жыл бұрын
Thank you for making/sharing this video. I learned several things! : )
@sarahandrea31595 жыл бұрын
Sooo glad I found this, as I am in the same situation: can't afford to get a professional machine. However, I am a bit confused (maybe as a non-native English speaker). Sometimes you seem to say that you heated up the leather. But you only heated up the metal stamps, right? And if so, in the beginning, you are successfully stamping, but without gloves. hmmm... Do you put the entire metal part into a toaster, or is it a mini oven/toaster? Thanks for the clarification!! :-)
@cerupsly5 жыл бұрын
I only heat the letters themselves. Not the leather. And then i attach the letters to the handle, which I did not heat
@cerupsly5 жыл бұрын
But I bet the letters wouldn’t cool off so fast if you heated the handle as well... of course then gloves would be non-optional.
@sarahandrea31595 жыл бұрын
@@cerupsly thanks, that makes sense :-D
@lauradonovan26315 жыл бұрын
@@cerupsly Did you stamp the leather first, then re-stamp with the foil on top? I saw a tutorial that said to do it that way but it would be easier if you didn't have to.
@cerupsly5 жыл бұрын
Definitely DON’T do it that way. I tried it. It’s nearly impossible to get everything lined back up. You have to do it all in one go. At least that’s what I found.
@beeb12934 жыл бұрын
This was super helpful. Thank you!!
@lauradonovan26315 жыл бұрын
Best video I've seen!
@cerupsly5 жыл бұрын
That’s so nice!!!
@barattolo2 жыл бұрын
What happens if the stamp is too hot? I'm thinking if I could dip the stamp in boiling water, and maybe heat it up briefly with a torch? How precise needs the temperature to be?
@Ghryst2 жыл бұрын
what type of foil are you using? i spent $25 on some cricut iron-on foil, and it turns out to be rubbery film of thermo-adhesive, i dare not even try it
@ordnaelshideout3 жыл бұрын
Super helpful, thanks for the tutorial!
@Momsmusicchannel6 жыл бұрын
Great video!!
@mikecalhoun84976 жыл бұрын
Soldering irons are generally about 500 to 600 degrees F. Solder melts at about 400 to 450 degrees as a general rule. This is a very general temperatures. Very nice video.
@cerupsly6 жыл бұрын
Right?! That’s what I thought, too
@brenlyd3 жыл бұрын
fantastic. going to do this tomorrow
@jimathey61533 жыл бұрын
OLD LEATHER SMITH here, it's called DE GLAZER REMOVES ALL YOUR PROBLEMS WITH COATINGS, GOD'S BLESSINGS ✝️⚾🙃
@goprojay971611 ай бұрын
Nice work. Do you think this could work on a baseball glove? Thoughts? Thanks!
@lexzan Жыл бұрын
Has anyone tried a Sous Vide? I am wondering if you put the letters into a zip lock bag and put it in the water until the stamps are at the desired temp?
@n2cable5 жыл бұрын
which u think is better...hot stamp or glue and foil leaf?
@cerupsly5 жыл бұрын
What he said.
@spdiv16 жыл бұрын
Thanks for the video! Sorry for the noob question, but what type of foil are you using? Thanks in advance!
@cerupsly6 жыл бұрын
spdiv1 the stuff i used is this: www.amazon.com/dp/B010C2DI1S
@OrignialLostintheFifthcorner Жыл бұрын
@@cerupsly unfortunately this link now goes to straws.
@dafneperez95866 жыл бұрын
sooo you are talking about 200 fahrenheit?
@cerupsly6 жыл бұрын
Yes
@mikecalhoun84976 жыл бұрын
How about a single burner electric hot plate. You can get them for less than $20. This would allow you to put the letter face down on the heating surface and heat mainly the letter it's self.
@cerupsly6 жыл бұрын
I think it would work, but you’d need to get one of those infrared thermometers to make sure it didn’t get too hot. Too much heat will wreck the whole deal.
@deinyum12335 жыл бұрын
Hi! Great video!! What’s the brand for the stamps? Do they come with the stick you are using to press the stamps down? Thank you in advance!!
@cerupsly5 жыл бұрын
Deiny UM I got them from Tandy. And yes. They came with the handle.
@deinyum12335 жыл бұрын
The Real GM found it. Thank you!!!
@professorjan9277 Жыл бұрын
what brand of foil did you use
@awilk66254 жыл бұрын
Thank you for sharing your tips !!! Does it work with syntetic leather ?
@cerupsly4 жыл бұрын
I don’t know! Just have to try it! My guess is yes.
@benaltemus22155 жыл бұрын
How long did you leave the stamps in the toaster oven before you knew they were at temp? Thanks for the video, I knew there had to be a way to do it without buying the expensive machine!
@cerupsly5 жыл бұрын
Once the toaster oven was hot, it only took a short amount of time to get them hot. Maybe 2-3 minutes the first time. But then
@cerupsly5 жыл бұрын
It was a fair bit of trial and error though. So give it a few practice tries to get the hang of it.
@mylittleasu4 жыл бұрын
Where did you get the letters?
@imtrex521 Жыл бұрын
nice
@judec68422 жыл бұрын
how do you warm the stamp please
@mayloh85064 жыл бұрын
Hi The Real GM! I loved your video! Apologies in advance if you've answered this question - I had a thorough look. What size are your stamps from Tandy? Thanks!
@cerupsly4 жыл бұрын
May Loh I actually think these letters only come in one size from Tandy, which is where I bought them!
@cerupsly4 жыл бұрын
Found it. These are the ones I bought: www.tandyleather.com/en/product/craftool-1-2-13-mm-block-alphabet-set/craftool-1-2-13-mm-block-alphabet-set
@akivae44322 жыл бұрын
Does this work on faux leather?
@vandree122 жыл бұрын
where can I get all the tools you use in the video?
@smithajensen68093 жыл бұрын
Hi. This is a great video. Can we use deco foil?
@cerupsly3 жыл бұрын
Smitha Jensen yes. I think so. Try it first though. And experiment with different temperatures. That’s the key thing, I found.
@BJH-iv6nt Жыл бұрын
Did you reseal the leather afterwards?
@cerupsly Жыл бұрын
I put weatherproofing on. I think I used mink oil or something like that.
@BJH-iv6nt Жыл бұрын
@@cerupsly I would not have done this without the machine. You were very brave and did a great job.
@robs11903 жыл бұрын
Centering it looks difficult
@FiendishSpirit5 жыл бұрын
from where did you buy those metal letters please ? and can we get custom shapes ?
@cerupsly5 жыл бұрын
Tandy
@cerupsly5 жыл бұрын
FiendishSpirit I actually know a place that does custom shapes but I’ll have to hunt for it. I don’t remember them off hand but I bought something from them a while back
@FiendishSpirit5 жыл бұрын
also what is that alcohol ? you used to clean the mess ? can't seem to hear what you said. thanks!
@cerupsly5 жыл бұрын
FiendishSpirit it’s denatured alcohol. Ethanol
@joshwright82434 жыл бұрын
Is the stamp your using heated? Or room temperature? Thankyou
@cerupsly4 жыл бұрын
did you watch the video?
@joshwright82434 жыл бұрын
The Real GM yes but didn’t quite get if it was heated or not sorry
@Frenchsnipe Жыл бұрын
So I need to put the letters in the toster ? 😂
@rsbuilds60464 жыл бұрын
Where did you get the letter stamping kid from?
@cerupsly4 жыл бұрын
Tandy 👍
@pressplay17034 жыл бұрын
Can I do this with kitchen foil?
@cerupsly4 жыл бұрын
No. It’s a special foil.
@kaylaschmitt56005 жыл бұрын
do you have a link to where you bought the stamp tool? or what type of foil to use or what its called ?
@cerupsly5 жыл бұрын
The foil that I used is: www.amazon.com/dp/B010C2DI1S I got the stamping tool from tandy.com.
@tagreednaqeeb42602 жыл бұрын
@@cerupsly may I ask you what is the size of the letters?
@DevilNeverKnows3 жыл бұрын
Why do all these people have middle names?
@michaels346135 жыл бұрын
I finally found someone not using a scrap of unfinished leather, do you think this process would work on a kate spade purse? The website says it is "boarskin embossed cowhide". Thanks so much
@cerupsly5 жыл бұрын
It will work, but the chances are that there's a boatload of finish on the leather, which you will have to remove first -- otherwise it won't work. I used denatured alcohol to do mine, which worked great. Denatured alcohol is nice because the smell is fairly weak and it evaporates very quickly. Any solvent would work, though. I would want to test it out on a very inconspicuous spot on the bag to make sure that I didn't mess up the bag... maybe the bottom. You will then want to use some sort of leather finish to get the sheen back. Fiebings sells a lot of good stuff. I usually go to the tandy website to buy that stuff. The only thing I would really worry about it getting the luster of the leather to match the rest of the bag. Try the bottom. That's what I would do.
@michaels346135 жыл бұрын
Thanks for the quick reply that’s what I’ll do
@mareike42015 жыл бұрын
Hi! What kind of foil did you use to do this? Thanks :)
@cerupsly5 жыл бұрын
the stuff i used is this: www.amazon.com/dp/B010C2DI1S
@karlaboggs90755 жыл бұрын
What brand of foil is this
@cerupsly5 жыл бұрын
the stuff i used is this: www.amazon.com/dp/B010C2DI1S