Go subscribe to Chuck at Dadding All Day - he has a great channel kzfaq.info/love/SHaPGIlNb6QQ1_ZJNpsi7g

13:49 of positiveness. During these crazy times, I love this channel even more. Well done Allyn!!!

Side note: bring back the cigars and craft beer.

Hey, I just wanted to say thank you for supporting cleeter, youre the best man!

Hi Allyn! I have about 25,000 sq ft of grass to mow. In the very front of the house I use my Toro Hand Mower around tight spots with the curbing. We did purchase a 2019 Gravely ZT HD 48 last Sept. A Landscaper told me to go real slow on my turns. The exhaust is on top. I won't let my Husband mow. It is the best mower on this planet!! The only thing I have to learn is use the Weedwacker and Edging so that my Husband can take one of the boats and go Fishing! Finally got my cordless EGO Blower & I love this. Your lawn looks super as I have been watching you for a long time. Thanks for sharing! Big Hugs from Northern Idaho!!

Bought my first zero turn mower two weeks ago after lots of research. I chose 2020 Timecutter and could not be any happier. I look forward to the next cut. Thank you for your videos.

I had a John Deere zero turn that also did the exact same thing. Exhaust blowing on bottom. Returned it and bought a scag liberty z. Exhaust is pitched out side with no problems.

Your "How to choose a mower" video was a huge help for me. I have an Ego mower (trimmer, edger, blower and snowblower, too), and it did pretty well, but it wasn't quite the result I was hoping for. I had to overlap a lot, and even then I still would get a lot of mowhawk areas in the lawn, and even with the high lift blade it left a lot behind when I'd mulch. I felt we needed something a bit more, so I bought a Toro Timemaster. I've had it for 3 weeks now and love it. I go wheel on wheel when cutting, rarely have a blade that isn't cut, and the difference in how the lawn looks is amazing. It also cut my mowing time in half (or more due to how much I had to overlap previously). I'm not saying the Ego is a bad mower - quite the contrary, I just don't think my yard (very uneven) and mowing style was a good fit. I still have the Ego mower and use it in some areas of my yard, and still enjoy using it. Thank you for the "How to choose a mower" video - it was a tremendous help.

Love your videos brother! We have recently moved and I decided to go all out on my new lawn by starting a program with your app. I will not be defeated by weeds again!! Keep up the great work!

Nice of you to help out a newbie like Chuck....Good man Allyn!

Toro mower looks good, like a Cadillac! I’m still happy with how my roadside found mower preforms and try to show people “Canadians” you don’t need a crazy mower to have a nice lawn! Great video as always Allyn , I’m looking forward to the next one! 👍🏼

Mowed yesterday with your Spotify playlist. Definitely enjoyed the mow. Thanks!

We have an old (like 2006 area) Exmark Lazer Z with a 62” deck at work (building and grounds for a school) it is our primary mower and don’t have any issues burning grass. The exhaust on all of our mowers (the Exmark, a Ventrac 4500 for the embankments, and a Walker with the grass collector for around the building) all blow out the side of the mowers not down.

I have had a couple mowers that did the same thing with the exhaust, and would burn the grass when I got off of them to open my gate to the back yard. I went to the big box store and purchased some sheet metal and then fashioned a heat/exhaust deflector below the muffler and then painted it with black bbq paint for a finished look.

Another great video, seems like I enjoy each new video more than the last....keep em coming!

BROWN SPOTS.... That's where those random brown spots are coming from!!! I just bought a 2020 42" myride. I thought my old Time Cutter was dropping oil and killing the grass..... guess it's from the new one. This new mower has all the neighbors Jealous, the suspension seat is brilliant and the thing feels commercial (I assume, never been on one). You Rock Man! Love the vids!

That looks awesome buddy thanks for a video we missed them the past couple days

Have about 36k sqft in the back and was walking an old school Encore Proline 48. Picked up the Toro TimeCutter 42 and the cut is so much better. This zero turn really moves too. The blade tip speed is crazy. KBG & Black Beauty mix over grown and went through like it was nothing. Great Mower!

2001 Toro Z master 62" exhaust is up top and blows out the side at least 2' off of the ground so no grass burn, love this mower Awesome cut Awesome strips had it since brand new

I purchased that same Super Recycler 2 weeks ago. I got the electric start model because of health issues. Great dealer (no big box). Best deal too. Toro has been in our family's stable since 1959. Great products.

Allyn thank you for the journal ( Yard Mastery ) i love it use it every week i can look back at history of the lawn and at 70 i can't always remember everything haha !!!!

It happens with my gravely ztx 42. I always try to stop on concrete. Learned the hard way

Nice tunes. Especially the one at the end. Going to have to check out your Spotify playlist. 👍

My Toro MX 5075 has the same problem; as in burning the lawn from the hot exhaust if I sit in one place too long. So I have learned to keep moving. The higher grade Timecutter HD and Titans have an exhaust that is directed off the back, and not down on the turf. Otherwise, I love it. The other issue is that it is so much fun to use that I often double cut, and thus the gas consumption goes up. The My Ride system is super comfortable, and the quality of cut is great.

Hey Allyn! I have the 2020 TimeCutter 50" model with the Kawasaki engine, and it also burns the grass if you sit in one spot for a little bit. My previous mower was a 2018 TimeCutter 50" with the Toro engine, and it did NOT do this. Must be something they changed for the new models?

Loved my old toro with 2 Cycle Suzuki engine, was still going strong after 20 years. Finally deck failed and I had to replace it. Great video

Nice rig! 🤙🤙my fav part of mowi g season here in texas for st augustine, highest setting till mid november. My old Dixon would do that burn but I welded on a deflector so that stopped future burns or beer stops as the wife says

My commercial Toro Titan HD 2500 exhaust discharges out the right side. It has the Kawasaki engine. Super happy with it.

I have a Husqvarna Z 254 and it has a heat shield under the muffler. I don't get any grass burning from it. I also have a mulching kit on it. I also use a Big League roller on the back of it. It leaves awesome stripes in my turf type tall fescue. I also just picked up some new G5 Gator blades for it. The G5 has the tungsten Cutting Edge on it which does not get dull very fast.

Got the Timemaster 36” walk behind last season and love it!!!

Awesome! Always wondered when you would grt a zero turn for the aug, as a lawn care owner I have a 42” John Deere z335e I believe it was 2600 and I have put over 280 hrs on it. Still leaves a great cut and never had a problem. But when I cut st aug with it, it’s probably the most satisfying thing to cut. Push mowing it doesn’t get that same satisfaction.

Get'er done! Love how you take that much off and it's still deep dark green

I have a Timecutter 4225 that is a couple years old. I also get those burn spots if I sit for too long. I let my son mow this Spring for the first time. That of course led to long pauses in the yard given instructions and 3 days later I had burns all over my lawn. I had actually even sent you pics via Twitter I think. But I figured it all out after I remembered that he had mowed. I usually get a couple spots throughout the year, but this was real bad. I now make as many turns as I can on pavement and haul more ass when mowing so not to stop. I think it is a design flaw with those Toro's.

My scag has side exhaust. Have you experienced the tires chewing up your lawn during turns? Or the caster wheels?

5:33 biggest mow fail in the history of lawn care... Connor would be laughing

I love my toro turbo force. 48 inch mulching deck gets me in most customers gates in their back yard and hell it's been running for 14 years. Engine was just swapped last year through a predator 708cc on there and shes been ripping ever since

Congrats on the first ToroT.C.2020!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

As always..... I enjoyed this.

my sapper zero turn also blows exhaust downwards, although not straight down but at an angle. I actually put a little piece of flex pipe on mine that blows it upwards. just used a little self tapper to hold it on. Before that, i just idled it way down, gave me a few more seconds if i needed to hop off for a minute.

My Question is when you want to go back n forth when you mow instead of in a box the whole time and you have lots of obstacles is the Zero Turn worth it over the "Regular" riding mower when on average for the 42" models the Zero Turn is $800 more. I have an old rear engine Toro rider and need to get something new as its pretty tired out and parts are getting hard to find, I find myself with worn out arms between all the turning I have to do on the steering wheel by the end, my detached garage is at an angle behind our house and we have lots of trees soo I'm constantly turning

how is the suction on these toro mowers? Seems my grass TTTF , will stay matted down in several spots. Looking for a toro with plenty of deck suction for a clean looking cut.

Liked because you're a lawn God and made Cleetus' place look unreal.

I have the same mower in 50”. First time I mowed I had burn marks all over the yard. Toro said it’s because my grass is too short (4”) and heat stressed. I could tack on a heat deflector but it would probably interfere with the bagger I’m thinking of getting. Spending this much on a mower I would expect things like this to be figured out ahead of time. Other than that I’m happy with the way it rides and cuts.

Hi Allyn, I bought the Toro Timecutter (SS4225) last summer. WHAT FUN!

Give me some of that rain!!! I’m up over by here in northern Indiana and we’re going through a drought right now. And when it comes to the zero turns I’ve used the exhaust system that always been to the side and not shooting down... I think it just a flaw.

All rise for DAD...i totally agree..i do use a strip kit but sometimes i cut without it..my grass stands up better when just mower stripping..

Love to see a video on either the new Ferris FW15 or Snapper SW15 walk behind 33" mower with Honda motor. Looks like a TOTAL BEAST. Not cheap at almost 3K, but it's perfect for the right applications. I'm looking at buying one of these but they're selling faster than dealers can stock um.

Nice work man. As to your question about the exhaust, no I run ZTs all day and haven't noticed that issue. Most of ours point straight out the side or back. I have accidentally set a hay bale on fire at our farm before though when i got too close to it with one of my old mowers 😬 Another tip would be to pull your throttle to idle for starting and turning off the engine, I know they say to turn it off at full blast on some of those smaller ones but you can end up developing engine issues eventually as a result.

@4:15 I am a newb at knowing how sharp my blades need to be. What should it feel like to the thumb? Also, I have a Gravely ztx 42". I learned the hard way leaving the mower running while stopped. Definitely burned the grass

Can’t wait to see the ride on sprayer spreader video that must be coming after seeing it make a few cameos

You’ll really notice the quality of the cut improving when you step up to a twin blade commercial mower. The faster the blade turns, the better quAlity of cut. I just purchased a Ferris Fw15 walk behind with 32” cut. Great quality of cut and it stripes very well also. If you really love to mow and want a exceptional cut, it’s well worth the money to purchase a commercial mower.

I just got the 75744 42” fab deck from my local toro dealer. They talked me out of the one you have as folks weren’t having great luck with the my ride units. I got a Timemaster last year but decided to get the zero turn for this year because it just gets so dang hot here in east Texas.

Nice review! Do you have mulching blades installed on the new time cutter? Might help with some of the bogging issues.

I DEFINITELY have burn issues when I idle. I also have a Timecutter, from 2018 which isn’t the my ride. It’s a design flaw. There’s not many on this mower, but it’s one of them. The other is the oil drain hose. The end slips into a fragile plastic engine shroud. You have to be VERY careful getting it off or else you’ll need to get a new shroud cover cause it’ll break the plastic nipple clean off. With all that said, I love this mower. It makes mowing fun and fast (when it needs to be). It cuts cleanly at any speed, as you say.

Have owned many commercial mowers, never noticed one burning lawn. I even owned a timecutter back in the day. Good homeowner mower. All we run now are Walkers.

I love the Old Navy music in this video Allyn.

WoW. That toro Z-turn gives an amazing cut 🤩‼️much better than my snapper Z-turn

Haha, that is crazy thick! My cool-season backyard gets real thick and with my 21" push mower mulching it cannot handle it after 4 days of growth at the highest setting. I think I need more power!

Hahaha! Always informative, always entertaining!❤

Can you stripe your Zoysia? I just got a new Zoysia front lawn and still wondering how it will stripe here in Dallas/Ft Worth area.

When I was in my 20s I never dreamed I would have 6 lawn mowers. On the you tubes watching videos about growing grass ,cutting grass, and killing grass. O well.

I'm very new to lawn care and trying to learn. Quick question I had watching this is about your 1/3 rule. This looked a little more than a 1/3 cut so I'm curious if I'm mistaken or if there are exceptions to the rule. Just trying to learn. Thanks for any help!

What's your view on robot mowers? (The best would be a link to that type of video.) I live in Sweden, so cold climate grass and moss is the common things in the yard.

You must be the joy of the neighbourhood with all the noice and machines .

I came for the mow, stayed for the play list. But I got burned like your lawn 😂

What do you use to sharpen your mower blades?

I thought we were about to watch you enjoy the tow for a second.

Looking cub cadet ZT1 50 in for 3000 BUT SEEN SOME PEOPLE HAVE DECK VIBRATION ISSUES BUT NOT all so looking at this 50 inch but trying to stay in the same price range what you think

Do you know if the Toro Timecutter 50” (74751) with the Kohler engine would burn the grass from its exhaust?

awesome video keep up the great content

What grit size do you use on your angle grinder ovur by dere Allyn?

awesome video it was really good

'You do it for love.' Me too but with my wife! LOL. Actually shared this with my son, he has lawnmower 'setting' issues - Thanks for the vid 'lover boy' j/k

Did you hang around for the drifting with Garret? I would love to see you go for a ride around the track.

Allyn you’re the man! Thanks for the help on Instagram!

My first mower was a Toro time cutter and I had that same problem with the exhaust burning the grass. I have since purchased a commercial zero turn mower (Exmark Lazer z) and the exhaust is straight out the back and does not burn the lawn. Definitely is a design flaw on the time cutter mower.

Strait up that is got to be the thickest lush St. Aug out there. For real I haven't seen many that get so thick. (Thumbs up)

Hey what hat are you wearing in the video? The black one with the Montana state outline. Could you put a link?

In the world of mulching the turf, it’s all about the HP. We run 52” dedicated mulching mowers with a Kohler EFI 24 HP. Anything less will completely bog the engine down.

Hell Yes on the Razor Sharp Blades! People just repeat the same old stuff and don't really do their own research...or hell, just try it for themselves!

Ive always ran 60" exmark commercial mowers. All of them have the exaust pointed to one of the sides, ive never had problems with the exaust burning the grass. However I did have that problem with some hedge trimmers a while back. I have some now that discharge sideways. I do beleive it is a design flaw in the mower, however it seems like an easy fix with a 90 degree elbow for steel water pipe. Or just turn it off when is stationary, you cant enjoy the mow if you just sit around the whole time. 😆

My yard is looking the best it ever has...because lots of rain, quarantine and you. But I do have problem areas. If I take. Pic, could you give me some advice?

My zero turn never sits long enough to burn anything🔥😏. Have to go check my Toro and see where the hot air goes.

Last One....Looked like temps were not so hot when you mowed??? Looked relaxing.

My John Deere Z335 zero turn does the same thing. If you let it sit on one spot too long, it burns the grass. I’ve learned to shut the engine off if I’ll be off it too long or just park it on concrete (driveway). Also, if you want to get better stripes, after cutting the grass, drop the deck to about the lowest setting WITHOUT turning the blades on and redo your passes. Tire marks will disappear and lines will be more vibrant.

That overgrown st aug is looking prehistoric. Great mow!

I have a scag turf tiger and the muzzler is on top and exhaust sideways and my exmark radius also exhaust sideways..

I have an Ariens zero turn and it exhausts out the back. I’m surprised Toro didn’t install a heat shield if they weren’t got to pipe the exhaust a different direction.

I've got almost an acre of irrigated floratam in houston area, some of the hardest variety of st Augustine I've found to mulch when growing season is on superb awesome variety but man it can be a challenge to mulch if it's over 5" im using a 721 front deck grasshopper mower w medium lift blade and complete mulch kit, do you guys see much of grasshopper out that way. they've got some of the best deck-airflow technology ive seen on their true closed chamber mulch kits.

That’s some tall grass but better yet that is a super sweet black hat sir! Me want

It is the construction of the Toro, there are brands that have a higher exhaust construction or the exhaust in a different place. And you have to mow your lawn long, that makes sense to.

Looks Good! Now test it against Toro's TOL Z-Master 6000.

I had a mx5075 with myride. I bought it after selling a ferris is700z 52". I traded the toro in for another ferris is700z 60" with a suspension seat and certainly can tell a huge difference. Not sure its a terribly fair comparison due to the ferris being about twice as expensive, but my goodness it's way more enjoyable. My yard is terrible bumpy, the toro was very comfortable riding on it, however it was tough to keep a straight line with how bumpy my yard is, with out going turtle slow. On my ferris, i can go way faster due to the shocks.

Yes, the burning in the grass is from the exhaust. It depends on the make of the mower and where the exhaust is but I had the same thing on my John Deere x310. The exhaust was pointed down in the front towards the grass and would burn the lawn when staying in one spot.

That lawn though 🥰👌

Where did you get the mower jack

Oh great, here's Hane parading around "I got da 1st Time Cutter in the U S of A over by dare!" That's a small notch above people claiming "First!" On a YouChoob video. All seriousness, that's pretty cool you can claim the 1st one.

What kind of sunglasses are you wearing?

Muffler burning is more common than you think. I've got a Hustler with a Kohler and it doesn't burn, but the same exact model also comes with a Kaw engine that burns. Then again, I don't stop much... with 6 acres I don't have time to stop.

You should be doing a perimeter pass first, riding the edge with your left side bc you have 1-2" of overhang. That gives you the clean edge. Love my Timecutter