Our first build back for more power! - THE SKID FACTORY

  Рет қаралды 135,554

The Skid Factory

The Skid Factory

4 жыл бұрын

Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfactory.com
Today on The Skid Factory, AL & Woody revisit their first project car that was released on KZfaq.
Marks 1970 ZC Ford Fairlane was originally powered by a 302 Windsor but was swapped out for a Toyota 1UZFE V8 accompanied with a T66 Turbo.
It made 450HP at the wheels and has been a very reliable car for almost 3 years until recently when Mark had it painted and it sat at the panel beaters for a few months without being started.
Expecting the worst Mark decided to turn the wick up and throw some new parts at the 1UZFE including some new Rods, Pistons, Kelford Camshafts and a GTW3884 Turbo supplied by our mates at Golebys Parts.
Want to watch the original series? Check it out here!
• The Skid Factory Serie...
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
Facebook Page: / theskidfactory
Instagram: / theskidfactory
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

Пікірлер: 268
@lordmmx1303
@lordmmx1303 4 жыл бұрын
I like how Turbo Yoda learned to speak in front of camera over the years.
@FREQQLES
@FREQQLES 4 жыл бұрын
This is the essential service I need.
@Ward1706
@Ward1706 4 жыл бұрын
Alan works from home and he's allowed a guest. He’s fine.
@mongreluc1588
@mongreluc1588 4 жыл бұрын
Needs that second safety turbo
@if66was99
@if66was99 4 жыл бұрын
Safe-T! For those TED moments.
@michaelbeattie6953
@michaelbeattie6953 4 жыл бұрын
Love the cut to woody lighting the tyres up. gold.
@toddmccarter45
@toddmccarter45 4 жыл бұрын
6:28 man the reflection in that paint, the ole panel beaters did a good job
@EzraH
@EzraH 4 жыл бұрын
hahah look at al now who remembers how shy he was in the earlier days of mighty car mods
@K1lostream
@K1lostream 4 жыл бұрын
Ezra Hill - what I remember from the early days was the Yoda ice-death stare!
@myownsite
@myownsite 4 жыл бұрын
@@K1lostream Would that block fit my Honda?
@prcmechanicalandmedia4681
@prcmechanicalandmedia4681 4 жыл бұрын
Think it was just Moog 😂
@asjmpickle
@asjmpickle 4 жыл бұрын
what that was years ago? damn time flies felt like it was late 2019 you guys started...
@if66was99
@if66was99 4 жыл бұрын
They were on MCM TV2 before they started their own channel.
@asjmpickle
@asjmpickle 4 жыл бұрын
@@if66was99 i know i've been watching from the start just seems like it wasn't long ago
@if66was99
@if66was99 4 жыл бұрын
@@asjmpickle Time flies! :-p
@SID_666_
@SID_666_ 4 жыл бұрын
That Kramer portrait on the shed wall 👌🏼 lovin the channel it's now at the top of my KZfaq must watch list.
@i_am_tinny_man_2267
@i_am_tinny_man_2267 4 жыл бұрын
nugget garage and the skid factory are Australian's top 2 you tube channels
@brendanrandle
@brendanrandle 4 жыл бұрын
Clickspring is Aussie as well, not a car channel though
@TimmyTechTV
@TimmyTechTV 4 жыл бұрын
My Subaru has a Allied sticker on it. Finally had someone in the Seattle area ask if I was a Skid Factory fan. I replied that I'm a fan of anything with Turbo Yoda and gave them the chopped sign. :)
@michaellatham9737
@michaellatham9737 4 жыл бұрын
What a Beautiful car! Been here since day 1 and some how knew this would eventually be back to get more horse puppies. Hell yes!
@scottm6018
@scottm6018 4 жыл бұрын
Same here dude! Been waiting for this
@Beer_Dad1975
@Beer_Dad1975 4 жыл бұрын
Just want to say thanks for the awesome videos, really makes these tough times a bit easier having stuff like this to watch.
@hiblendmedia
@hiblendmedia 4 жыл бұрын
Skid Factory and MCM video releases on the same day are Maaad.
@MyBridgestone24
@MyBridgestone24 4 жыл бұрын
Awesome to see builds coming around full circle.
@vladsychev9971
@vladsychev9971 4 жыл бұрын
Love the builds! One of the best channels, keep up the good work!
@mickfbr
@mickfbr 4 жыл бұрын
Looks like another great build to watch... I fkn love the outakes... crack up as!
@simes007us
@simes007us 4 жыл бұрын
I love that the shop is getting upgraded! It hots as balls in the summer there.
@thenonoman
@thenonoman 4 жыл бұрын
"The boys have come to me yard!" Lol.
@darianistead2239
@darianistead2239 4 жыл бұрын
E85 Milkshake, know the feeling although I have no valves to get stuck lol.. Also the full of E85 catch can.. The joys of cars sitting and firing them up everynow and then..
@dubCanuck1
@dubCanuck1 4 жыл бұрын
More turbo goodness! Keep on trucking boys!
@gordonneilsen6039
@gordonneilsen6039 4 жыл бұрын
Al and Woody are the gold nuggets of this MCm world! But they all are awesome.
@tomrobson761
@tomrobson761 4 жыл бұрын
Haha love the throw back to the backyard paver skid in the cressida 😄🤙
@rexrst
@rexrst 4 жыл бұрын
Brings back the memories of the first episode I watched at the very begining of the channel :D :D . Shout out from Poland!
@magnus.nasmark
@magnus.nasmark 4 жыл бұрын
So nice to se the gal back. This has always been a very pretty build.
@aSinisterKiid
@aSinisterKiid 4 жыл бұрын
still looks freaking beautiful. love that color
@JohnSmith-ud9ex
@JohnSmith-ud9ex 4 жыл бұрын
Thanks for the great entertainment lads ! Hope everyone is safe and well. Here last time you had this in the shop and I`ll be here the next time too ! = )
@seery188
@seery188 4 жыл бұрын
A length of rope in the plug hole will sort out them stuck valves, has to be on compression stroke though,
@StuFletch68
@StuFletch68 4 жыл бұрын
had a stuck valve in a 308 once, i filled it to the rocker covers with diesel, left it for a week, then left it drained for a day, fixed it! stopped it using oil too
@DanPellegrino486
@DanPellegrino486 4 жыл бұрын
Woody never looks the same twice. You couldn't make a wanted poster of this guy if you wanted to. Great video as always guys.
@benjamincole9555
@benjamincole9555 4 жыл бұрын
"yeah nah nah nah nah" *Penny drops* Al is fkn Mike Nolan's brother!
@RussellRobinson77
@RussellRobinson77 4 жыл бұрын
Still one of my favourite builds to come from this channel 😁
@anthonyspencer3920
@anthonyspencer3920 4 жыл бұрын
Mid 11’s with something so heavy is bloody awesome 👏👏👏
@if66was99
@if66was99 4 жыл бұрын
It's funny. When you guys work on these old Aussie Ford and Chevy's I see body lines and chrome pieces that look like 3 or 4 different American cars. But none of the whole cars look exactly like any 1 model of American. Who else sees a Galaxy 500 in those headlight bezels?
@ibast1
@ibast1 4 жыл бұрын
Yeah Australian Fairlanes were build off the "Canadian" Falcon base but had styling influences from American Fairlanes and Galaxies. The Galaxie would have been too big for the Australian market. Our family car (Falcon and Fairmont) was what you guys called a compact. These early Australian Fairlanes were a luxury compact with a longer bonnet and boot (trunk).
@chefcamsey1375
@chefcamsey1375 4 жыл бұрын
Awesome video guys 👍
@BustedGeezerGarage
@BustedGeezerGarage 4 жыл бұрын
You most likely already do it but we were required, back in the day of flex-fuel introduction at Ford, to use full synthetic oil for flex-fuel cars. Engineering reported that the alcohol washed regular oil off the cylinder walls causing cylinder scaring and piston damage. Not surprising to hear it causes valve train damage as well.
@BigDaddyGdog
@BigDaddyGdog 4 жыл бұрын
Love the video guys. Got any tricks to unstick a valve on a ca18det in a kombi without pulling the engine apart?
@johnsmith-qz4bv
@johnsmith-qz4bv 4 жыл бұрын
i remember this car ...still looks amazing
@kamerad1985
@kamerad1985 4 жыл бұрын
Running E10 1:200 with 2 stroke oil here. Works good as topoil and prevents corrosion.
@andrewmurray6772
@andrewmurray6772 4 жыл бұрын
I love the blue colour on this Fairlane, if ever i wanted a car to be resprayed, it would be this colour :)
@Chris-yy7qc
@Chris-yy7qc 2 жыл бұрын
Even on gasoline: Everytime you put your car into storage, make sure the engine is nice and hot (drive > 10 km) before you park it. Once in storage: Never start the cold engine for just a short period, shut it off and store it for a long time afterwards. Even without E85 the condensation happening will damage your engine.
@zZSpeedDemonZz
@zZSpeedDemonZz 4 жыл бұрын
at 17:00 what is that picture on the wall hahahah and the case of corona ahah classic
@jessebergunder
@jessebergunder 4 жыл бұрын
This was the first and favorite. Turned out so clean. Gotta get more power i guess.
@ingusrudniks3951
@ingusrudniks3951 4 жыл бұрын
It is possible maybe to relase stuck valve. Put the spark plug in, clock the engine in the way that is possible to fill combostion camber whith stuff from intake port. Mix the kerosene and a strong thinner 50/50 and plus 15% thin engine oil. Fill it up from intake port to be sure its in fluid walves leg. Check to not leak out to piston rings in crank case. Block intake hole whit some robber glove whith filling to close the hole. Thath staff is evaporates fast. Can do the trick.... Love your work..
@douglasm3310
@douglasm3310 4 жыл бұрын
I’m stoked
@wa.gtrsoul
@wa.gtrsoul 4 жыл бұрын
When I saw the caramelized Ethanoil I was half expecting a Yaris Hilton type musical montage.
@robertsawyer2986
@robertsawyer2986 4 жыл бұрын
that dam 8 ball gets everywhere
@blakeh4691
@blakeh4691 4 жыл бұрын
Are you able to use the old “valve saver” kits on this application like the old lpg kits had back in the day? Hope this could help.
@WeldinMike27
@WeldinMike27 4 жыл бұрын
Blake H flash lube upper cylinder lube?
@CobraDBlade
@CobraDBlade 4 жыл бұрын
Going to be paying attention to this one since I've been looking at UZ swapping my A70.
@robywankenobi32
@robywankenobi32 4 жыл бұрын
did you guys use the existing pcv.crankcase ventilation routing? maybe ts not getting flow at idle and light revs, pcv is usually better (and legal) to get positive flow as long as the clean air inlet into the motor is before the turbo inlet
@haha_you_dead
@haha_you_dead 4 жыл бұрын
90% I'm here for the build 10% I'm here to see if Woody has another new look 😂🤣👀
@alpineskiman
@alpineskiman 4 жыл бұрын
"doesn't sound like me at all"🤣🤣🤣
@Tonzeff
@Tonzeff 4 жыл бұрын
Go the "Friday" references... awesome!!!
@coolhandluke1503
@coolhandluke1503 4 жыл бұрын
I wonder if port matching would give a significant improvement to flow.
@peterwall737
@peterwall737 4 жыл бұрын
I'm in the UK and I love it 😎
@Imrahil94
@Imrahil94 4 жыл бұрын
Hey mates! I run my cars daily on E85. I am curious when you say we should oil change more often when running on E85? I change oil every 10-15k kilometers. One is a Chevy LL8 Inline 6 block and the other a Mazda L5 4 cyl. =) Thanks for the amazing work, I learned so much thanks to you guys!
@ziggassedup
@ziggassedup 4 жыл бұрын
That's why is a good idea to run some premium thru the Alky system before parking them up for some time...Save a lot of grief with our sprint car back in the day..
@syncrosimon
@syncrosimon 4 жыл бұрын
Great, something decent to watch 👍👍🇬🇧🇬🇧
@brilledwards
@brilledwards 4 жыл бұрын
Al with the milkshake meme puts a massive smile on my face!!
@stuartstratford9543
@stuartstratford9543 4 жыл бұрын
beauty beyond my comprehension
@mattgraham1983
@mattgraham1983 4 жыл бұрын
Yay👍👍😂 I liked that series...
@spartanreaper911
@spartanreaper911 3 жыл бұрын
where do i find the videos for the first build using the fairlane?? im getting an SC400 here soon and i need some 1UZ videos to watch lol
@nickthomas2242
@nickthomas2242 4 жыл бұрын
It’s midnight in England but I cannot go to bed now I have to watch.
@rjl110919581
@rjl110919581 4 жыл бұрын
thank you for detail video love my diesel turbo engine
@twelvepointfour
@twelvepointfour 4 жыл бұрын
What sort of car cover is that one you popped on at the end?? Looks like exactly what I'm after
@twincam16seca
@twincam16seca 4 жыл бұрын
I like the reference to butterfingers every time. Every time I touch a car it breaks 😂
@STREETCARCULTURE
@STREETCARCULTURE 4 жыл бұрын
Yes fellas 👌🏾🔥
@SigmAnalog
@SigmAnalog 4 жыл бұрын
"M Y M I L K S H A K E S" Good to see the old Fairlane back. Not so good to see the state of the engine, mind, but the paintjob almost makes up for it and the upgrade plans get us the rest of the way.
@if66was99
@if66was99 4 жыл бұрын
The chrome is GORGEOUS on that thing! Wonder if he had it redone or it's original?
@paulnorth9107
@paulnorth9107 4 жыл бұрын
Castor oil in the fuel will make it smell super nice
@RussellRobinson77
@RussellRobinson77 4 жыл бұрын
Does the plastic 2uz manifold fit the 1uz? I know they fit onto 3uzs fairly easily
@mattwilson4629
@mattwilson4629 4 жыл бұрын
Ha Ha Ha, love the 8 Ball at 6:52
@yanuardhana6457
@yanuardhana6457 4 жыл бұрын
That plenum are so good mate, where we can buy this?
@jimclarke1108
@jimclarke1108 4 жыл бұрын
Great looking fairlane $$$
@Thewolverine691
@Thewolverine691 4 жыл бұрын
hey guys love ya videos. just a quick question what would u guys charge to custom fit n fabricate a barra turbo engine to drop into a z32 300zx. if u have to cut the bonnet that's fine but would rather not, can have the car shipped out to you , just let me know ball park figure. cheers
@madmick3794
@madmick3794 4 жыл бұрын
Hell yes!
@yousifalsaad5056
@yousifalsaad5056 4 жыл бұрын
time for a woody's project with that engine....cough cressida cough
@OriginalMomo
@OriginalMomo 3 жыл бұрын
Overnight parts from Toowoomba! 😂
@fa74drproductions73
@fa74drproductions73 4 жыл бұрын
Al what would a rough cost be for a 1uz to haltech loom cost ?
@tastytears2793
@tastytears2793 4 жыл бұрын
Well, guess i'm not going to sleep anytime soon after all. :p - Totally worth it.
@1993kawasaki
@1993kawasaki 4 жыл бұрын
HA HA HA HA i was waiting for the token 🎱 p.s nice workshop insulation!!
@RealsteelNZ
@RealsteelNZ 4 жыл бұрын
Just re-watched the original build series to refresh the mind on this beast, and I have a question: you guys fitted the A340 automatic, what are the details on the shift control module you used? I'm putting a 1uz into my fj40 and stuck trying to sort an automatic box for it that's not too electronic, that module looked to be super simple, even a tractor mechanic like me should be able to fit it!
@theskidfactory
@theskidfactory 4 жыл бұрын
It uses an MV Automatics controller but you can also make your own. Google A340 shift controller.
@RealsteelNZ
@RealsteelNZ 4 жыл бұрын
@@theskidfactory awesome, thank you for that!
@southjerseysound7340
@southjerseysound7340 4 жыл бұрын
People ask me why I bother still running duel fuel and this is why. Ethanol can kill a motor if they don't get warm enough to get rid of the moisture and it's tough on injectors too. I stopped having problems with my Typhoon after I added a second small tank for gas. It's not hard to do and before I put the thing away I just flip a switch and use gas for the last few miles.
@neilrevhead9941
@neilrevhead9941 4 жыл бұрын
Castor oil That's a blast from the past
@FALL3NERA
@FALL3NERA 4 жыл бұрын
I’m gonna have to go back and watch the build series again, but was this car e85 only or flex fuel? If e85 only, would it be worth upgrading to flex fuel to try and prevent this from happening again in future by leaving it sitting with 98 and only run it on e85 when necessary?
@paterson022
@paterson022 4 жыл бұрын
Would it be worth adding some two stroke mix to the e85?
@MrWilliam.Stewart
@MrWilliam.Stewart 4 жыл бұрын
E85 fuel causing some valve guide sticking hey. Sounds like it needs some FUCHS Formula 60 oil. High film strength oil, ideal for engines using methanol and alcohol fuel. It's a bloody good product.
@nickcOfficial
@nickcOfficial 4 жыл бұрын
What cover is that? Interested in one
@kberry3065
@kberry3065 4 жыл бұрын
I see a lot of the classic cars down under are four doors. Is that preferred or were the two door models not available?
@ufi123
@ufi123 4 жыл бұрын
a lot had two door variants but they are very very expensive now and are worth more in original condition
@kberry3065
@kberry3065 4 жыл бұрын
@@ufi123 I understand. Here in the states you hardly ever see a modified four door. If you see one on the road they are left pretty much original. Odd how we are opposite in a way. Must be because if being north or south of the equator!😁
@smyffe69
@smyffe69 4 жыл бұрын
not related to this video at all but first thoughts on just adding a transfer case to a fwd car to make it a awd? for a paddock basher. obviously depends on car and case etc but should be doable right?
@DeadReckon
@DeadReckon 4 жыл бұрын
To be that car looks more mid 60's than 1970, it's crazy the design differences across the world.
@JohnComeOnMan
@JohnComeOnMan 4 жыл бұрын
My phone is permanently on silent too, brah. 😎👍
@floydmayer
@floydmayer 4 жыл бұрын
In the piano style tune playing, it sounds like a rattle can being shaken every few beats...
@mikester1472
@mikester1472 Жыл бұрын
I like the music in this video
@johnferronato7321
@johnferronato7321 4 жыл бұрын
Slab of Corona in the background (nice touch)
@bigal878
@bigal878 4 жыл бұрын
john ferronato heaps better than ‘lemon squash’
@odogzero
@odogzero 4 жыл бұрын
yoda, milk shake line, that's what i came here for!
@maxpwr_fpv4987
@maxpwr_fpv4987 4 жыл бұрын
Looks like Al talked back to his missus.
@RhysK94
@RhysK94 4 жыл бұрын
Nah Woody would never lay a hand on Al!!!!! ;)
@maxpwr_fpv4987
@maxpwr_fpv4987 4 жыл бұрын
@@RhysK94 Get in line, you can have one too.... hahahaha
@Whiskeyactual9531
@Whiskeyactual9531 4 жыл бұрын
Sup ya skids, everything doing good on your side of the world. (All things considered)
@edhbmx
@edhbmx 4 жыл бұрын
If you do another 1UZ build with the Holley plenum hit me up through the ELATE MFG website, we are already working in a bolt on offering!
@christiaanroos4479
@christiaanroos4479 4 жыл бұрын
Could you guys please share the specs of the kelfird cams with us?
@matthewbakker8113
@matthewbakker8113 4 жыл бұрын
Maybe add some 2 stroke oil to the fuel like the rotaries do?
@Greboth
@Greboth 4 жыл бұрын
I love Al quotes a meme rather than the actual song.
Building a Quad Cam Alloy V8 - THE SKID FACTORY
33:14
The Skid Factory
Рет қаралды 195 М.
1JZGTE POWERED LJ HOLDEN TORANA EP 2 - THE SKID FACTORY
25:58
The Skid Factory
Рет қаралды 166 М.
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 30 МЛН
WHO LAUGHS LAST LAUGHS BEST 😎 #comedy
00:18
HaHaWhat
Рет қаралды 23 МЛН
孩子多的烦恼?#火影忍者 #家庭 #佐助
00:31
火影忍者一家
Рет қаралды 52 МЛН
Intercooler Fabrication, Fuel System and Wiring, IT RUNS!
22:09
The Skid Factory
Рет қаралды 159 М.
Stripping a Perfectly good Holden VF Ute For The Engine!
28:01
The Skid Factory
Рет қаралды 124 М.
Ford Maverick/Nissan Patrol GQ Ute chop and M57 Ep.4
17:11
Steve's 4WD Shed
Рет қаралды 3,3 М.
Landcruiser airbox on my Dodge powered Nissan - Cummins Patrol EP8
26:34
The Skid Factory
Рет қаралды 179 М.
Post Dyno fixes and first test drive! It's Scary fast! - THE SKID FACTORY
45:48
Twin Turbo V8 1UZ Toyota Hilux
18:02
Grassroots Garage
Рет қаралды 31 М.
4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP2] - THE SKID FACTORY
31:23
The Skid Factory
Рет қаралды 181 М.
Duramax Turbo Diesel V8 Powered Nissan Patrol [Build Review]
23:43
The Skid Factory
Рет қаралды 219 М.
2JZ Powered Toyota 86 - THE SKID FACTORY - WE ARE LIKEWISE - [Build Review]
24:51
зил
0:32
Karol tv
Рет қаралды 729 М.
STAGE12 200CC FL-R EN ACTION 🧡🧡
0:49
MAXISCOOT
Рет қаралды 15 МЛН
ZİNCİRLEME TIR KAZASI OLACAKTI SON ANDA KURTARDI #truck #shorts
0:18
Наткнулся на заброшенный гараж🤨
0:36