TRANSOM COMPLETE & It's STRONGER THAN FACTORY| Pacemaker 20ft

TRANSOM COMPLETE & It's STRONGER THAN FACTORY| Pacemaker 20ft | Full BOAT RESTORATION V2 - Part 11

Рет қаралды 29,609

2 жыл бұрын

Welcome back to Another episode!
Welcome back to Another episode!
In this video we finish the transom and boy let me tell you, its stronger then factory coming in at just under 90mm thick!! this will have no worries carrying those twin Yamahas!
Thanks for watching :)
▼Subscribe to the channel / Angry Mack
/ angrymackadventures
▼MY Instagram:
/ angrymack
▼MUSIC:
www.epidemicsound.com/referra...
▼EMAIL:
angrymackadventures@gmail.com
▼SOCIAL MEDIA:
• INSTAGRAM: @ANGRYMACK
• INSTAGRAM HASHTAG: #ANGRYMACKADVENTURES

Пікірлер: 50

@johnlittleford4884 2 жыл бұрын

Well done on getting the transom finished

@billgomez06 2 жыл бұрын

Great stuff Mack keep it up.

@AngryMackAdventures 2 жыл бұрын

Thanks bill!

@1PricelessShot 2 жыл бұрын

Absolutely loving this build bro

@AngryMackAdventures 2 жыл бұрын

Thanks mate ☺️🔥

@Kenny10DeCrette 2 жыл бұрын

Keep on doing your thing man! Lookin great

@AngryMackAdventures 2 жыл бұрын

Thanks Kenny!! 🔥💪🏽

@joepsaila2837 2 жыл бұрын

That’s gonna be one strong transom great work guys cheers

@AngryMackAdventures 2 жыл бұрын

Thanks mate!

@icarussisyphus5201 10 ай бұрын

You rock!!

@george195lol 2 жыл бұрын

Love the build mate

@AngryMackAdventures 2 жыл бұрын

Thanks George!!

@dantolo817 2 жыл бұрын

Wow transom looks amazing good job

@AngryMackAdventures 2 жыл бұрын

Thankyou Dan!

@islander5284 2 жыл бұрын

Heaps of work 👏🏽

@AngryMackAdventures 2 жыл бұрын

Sure is! How’s yours going mate, looks like a work of art been watching your build for awhile

@islander5284 2 жыл бұрын

@@AngryMackAdventures slow been raining a lot here lately nearly ready to paint

@AngryMackAdventures 2 жыл бұрын

@@islander5284 been keen to see that!

@sewing1243 2 жыл бұрын

I'm eagerly waiting to see how you tie the new and improved transom into the gunnels and new hull stringers.

@AngryMackAdventures 2 жыл бұрын

Haha soon enough we will get there 😂

@caseydixon8714 Жыл бұрын

When you're using the fin roller.. try slowin the rolling speed sown a touch and only work it in one direction rather than back and forth. pulls the excess resin and air out of the lay up rather than pushing it back and forth. Looking great though!

@nwrx247 12 күн бұрын

On a grady white 1981 open transom.how many layer would be good enough and how thick would be good .8m new and needing to do a transom

@crispernator 2 жыл бұрын

Gday mate unc kicked it again and hurt his foot , that is going to be one strong transom and because you did it yourself you have saved heaps great work .

@AngryMackAdventures 2 жыл бұрын

Thanks mate!!

@nossrc5638 Жыл бұрын

I'm doing the transome of my starflite 21 checkemate. Do you think I can do the same fabric procedure you did? They are two 3/4 panels. It won't be too heavy or will it be fine?

@incognitoyt7940 2 жыл бұрын

Looks really solid boys, you took your time and did it right. Is their any issues using vinyl ester and epoxy resin. Correct me if I’m incorrect I didn’t think you could use epoxy resin and vinyl ester, they do not chemically work together, ?..

@AngryMackAdventures 2 жыл бұрын

Thanks mate! I touched base on this is last video because it’s a very small overlap it won’t effect it as a posed to a full laminate on top of epoxy.

@graemeward1349 2 жыл бұрын

Boom

@AngryMackAdventures 2 жыл бұрын

🤪

@Oz_Rebuilds 2 жыл бұрын

thats so awesome...looks like it would take a 600hp V12 lol....what's the overall thickness now once complete?

@AngryMackAdventures 2 жыл бұрын

She’s thick lol! About 85mm

@Oz_Rebuilds 2 жыл бұрын

@@AngryMackAdventures holy hell lol thats thick.

@nwrx247 12 күн бұрын

What's that pinkish or peachy color glue

@Andrey-zl9nm 9 ай бұрын

Please tell me. Between the layers or glass epoxy or polyester? And what is the glue between the plywood and the transom?

@anilgunawardena9631 Жыл бұрын

Hi sir a,m fiberglass technician u how job in nz thank you.

@elielancer2008 10 ай бұрын

This playwood is marine grade?

@gazza2006au 2 жыл бұрын

Mad job that transom will hold a couple 250hp easy

@AngryMackAdventures 2 жыл бұрын

😂😂

@obgmax1429 2 жыл бұрын

Can someone explain. How you fill the bolt holes? Seems like a risk to introduce holes when sandwiching the wood together. Are they just covered with glass and resin on the outside of the hole or do you fill them with resin before adding the glass ?

@AngryMackAdventures 2 жыл бұрын

Hey mate hole filled with resin all the way through then ground out like a bowl and layers of glass, sand flush This will be done later in the build

@westie4ageturbo.749 2 жыл бұрын

This interests me as well, seems like you have little option but adding holes through the new transom is not good, Need some industrial sized g clamps but they would be bloody huge to give the clamping load you need!

@808zone 2 жыл бұрын

best to pre drill old holes out one size bigger befor filling , creates a fresh bond

@rolandtb3 2 жыл бұрын

Transom check. So how much added weight is that?

@AngryMackAdventures 2 жыл бұрын

I’d say close to 50kg of extra weight in the transom from original. That’s a very broad guess

@tonyburton4963 8 ай бұрын

How thick is the transom? How much of that is ply? There doesnt seem to be much glass in there.

@AngryMackAdventures 8 ай бұрын

Plenty of glass. 90mm thick 6 layers of 1708 to start on the original outter skin. Layer of 25mm ply, 2 layers of 1708, one layer 450 chop, another Layer of 25mm ply, 2 layers of 1708, one layer 450 chop, last layer of 10 mm ply, 2 layers of 1708, one layer 450 chop.

@Fluid36 2 жыл бұрын

1708 already has a layer of chop stitched in so what's the point of the extra layer of chop?

@AngryMackAdventures 2 жыл бұрын

Hey mate it’s only very thin, not going to help with my situation so using another heavier CSM like the 300 helps me to eliminate air bubbles if the surface is not 100% flat. Worked well

@Fluid36 2 жыл бұрын

@@AngryMackAdventures Ahh right got you, makes sense thanks.

@frankcollins4743 Жыл бұрын

Why did you bother with ply? Pourable ceramic would be faster and a lot stronger, plus no rot ever. That is what I will be using in the next six months.