Triple your Shop's storage by doing this (BRILLIANT!

Рет қаралды 60,562

Ай бұрын

How To Build Affordable, Space-Saving Gear Lockers from Baltic Birch!
Join Wranglerstar in his workshop as he tackles the intricate task of building custom gear lockers from the finest Baltic Birch plywood-without any pre-made plans. Navigating the build process without a blueprint is a true test of craftsmanship, requiring foresight into how each decision impacts the overall design and functionality. It's about creating not just for utility but for aesthetics too. Why settle for anything less than beautiful?
In this video, Cody explores the capabilities of his new M18 Milwaukee Track Saw, a critical tool in achieving the seamless look that all skilled carpenters strive for: no visible nails or screws. He’s thrilled with the results - lockers that are as stunning as they are functional.
Stay tuned for part 2 of this project where we continue to refine and perfect our craftsmanship. Don't forget to hit like, subscribe, and join us next time in the workshop!
#Wranglerstar #Woodworking #Craftsmanship #DIYProjects #BalticBirch #ToolReview #MilwaukeeTools #WorkshopOrganization #CustomBuild #homeimprovement
-Amazon - our store - wranglermart.com
-Wranglerstarmerch.com - check out our new merch
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar

Пікірлер: 261

@wranglerstar Ай бұрын

Wranglerstar's Handy Screw Jig: amzn.to/3wkuxBP Milwaukee M18 Tracksaw: amzn.to/44td9aS Milwaukee M12 Drill: amzn.to/4aZqhH4 (amazon affiliate link)

@1neAdam12 Ай бұрын

A video tutorial for 'Double The Width Of Your Natural Stance' would also be appreciated.

@geoffkeller5337 Ай бұрын

@@1neAdam12hemorrhoid stance

@vikingr1000 Ай бұрын

Very nice. The only thing that runs through my mind is the 3/8" gap makes a great vent and a good access point for a mouse to a place where Momma Kitty can't follow. Since I was taught not to offer criticism without a solution. My humble offering is to put some galvanized mesh down there and use a wood strip to hide the edges of it so they don't catch anything in the cubby.

@SgtTaz Ай бұрын

Was thinking the same as well as adding a computer fan to each one while doing the lighting. Airflow would be improved and less likely to get the smell too

@jacksonbennett6151 Ай бұрын

I had the same thought about the mice ingress as well! Good idea with the forced ventilation too a timer switch would allow you to turn on a fan for a duration and shut off automatically.

@berserkhaus2009 Ай бұрын

He can just spray it with pepper mint essential oil every month.

@josephphelps5696 Ай бұрын

Staple a screen on the opening!

@charlieelderton3038 Ай бұрын

"I just start building then come up with clever solutions to my lack of planning" 😂 Gold.

@jacksonperrault6876 Ай бұрын

The Big Bear "must me nice!" got me!😂

@aarontengberg Ай бұрын

That caught me off guard and was great.

@russellswanson117 Ай бұрын

So now he’s a cabinet maker too. Well done, Cody! My one alteration: gap the hinged benches 3/8 on each side. Moisture rises and the wood may swell. Oh, and mount a vertical strip on on the back underside of each seat that firmly abuts the hinge to offer rearward support and help take pressure off the hinge when a person is seated. God Bless!

@gregchrist5090 Ай бұрын

He can easily add some vents to the fixed area of the seat with a router.

@parkermj Ай бұрын

LOOK at that WIDE west coast stance!!

@rickyorke3127 Ай бұрын

Beach Ball Stance

@c.a.g.1977 Ай бұрын

Very cool design! Might add some strips of wood under the lid, so they'll take the most of your weight when you sit on the bench (now only the tiny screws of the piano hinge take the weight).

@620JK Ай бұрын

@10:47 the tranquile masterpiece takes shape. The video editing and pride speaks loud. Oh and the “well beloved, that’s about all I have time for today” pure comedic genius

@tomfranta5495 Ай бұрын

Figuring out "Order of events" is my favorite part of a project.

@tanto2868 Ай бұрын

As an east coast man I must admit a small amount of jealousy towards that powerful west coast stance. Along with his immaculate hair piece. Simply stunning…

@zach2923 Ай бұрын

OB's "must be nice" was great. Love it.

@karsonbranham3900 Ай бұрын

That track saw is the bees knees!! Great job for winging it!

@monkeyman8265 28 күн бұрын

That’s nice and clean looking with seeing no fasteners nice job.

@danielbruinsma4049 Ай бұрын

the vent in the bottom also makes it possible to sweep dirt out easier

@Goodtimesbaddecsions Ай бұрын

Always a good day when you got time to work on improving the shop! Hopefully you like that track saw, been switching all my corded air nail guns over to team red battery operated, so far so good and not listening to a compressor go off all day is priceless.

@mattgarcia440 Ай бұрын

Nice job Cody, well done !

@UpstateMaveric Ай бұрын

Great video and project, optimizing and organizing the shop is the best feeling!

@Mindsetisthemotherofsurvival Ай бұрын

Fizz inducing craftsmanship!

@DaroffApFire Ай бұрын

Those are VERY handsome. Nice work Cody.

@-Kreger- Ай бұрын

Looks great. The mitered edge on the shelf is a nice touch

@JerodMatlock Ай бұрын

Those are sweet, I'm going to add these to my shop.

@MarkoMygun Ай бұрын

Very nice job Cody,and a very good idea for storage. I absolutely love those track saws ,and wish i had one. It is truly a game changer. Thanks for the video.

@RussWilsonII Ай бұрын

looks great!

@leederdavid4782 Ай бұрын

Nice job. Good to have “Must Be Nice!” back!

@HowManyLegsItHas Ай бұрын

Nice and clean!

@aeric_ Ай бұрын

beautiful work. nicely done cody! 👌

@bobbailey4954 Ай бұрын

Good job Cody the older we get the better we are

@Jib230181 Ай бұрын

Beautiful wood working bench cabinets, you did a perfect job on making those. Very impressive 👏.

@KK-bm3kh Ай бұрын

I never would have thought of it but I'm also going to do it in my garage for my motorcycle equipment. Thanks

@gregporter4766 Ай бұрын

Looks good!

@SCooperEagle Ай бұрын

Turned out ver nice. Like the design esthetic too.

@jimtom0824 Ай бұрын

Those look very sharp!

@realsupercopter Ай бұрын

Good idea and great execution, well done!

@sociopathmercenary Ай бұрын

That looks like Tigerply. Nice stuff

@AndyG_MTB Ай бұрын

I really enjoy this OG style content :)

@thefrankperspective4247 Ай бұрын

Getting good use outta that track saw. Nice

@paulpresto7346 Ай бұрын

Good work there sir

@tonycosta3302 Ай бұрын

CAD as in Cardboard-aided Design is always helpful. You can quickly mock up and modify a full size prototype with a box cutter and tape. And it’s a good way to use of all those Amazon boxes we all receive. That’s how us East Coast Prohos roll.

@GravityHazard Ай бұрын

I made similar cubbies for my daughters but I mounted the piano hinge in the gap between the boards and screwed into the vertical/cut edge. That way it’s more hidden , cheers

@ThrowsaParks Ай бұрын

Very well done sir. God bless.

@jerradgindle Ай бұрын

Beautiful!

@mkzenthusiasts Ай бұрын

Cody, if anyone complains about the cost of things you do or purchase they don't know you. You've been around forever and built up a massive following. I been around since Wrangler barn days and that time all those timbers you prepped for that small home were stolen and now look at where you are you have built an empire you built something to pass on You've helped so many young men over the years and if anybody complains about money then they're not worthy of your time I do like the fact that you threw in that short audio clip after you showed the cost of the plywood. I wonder how along that plywood would take to come in where I live I know it's special order so that's 13 ply hours wondered how many ply it was as I've seen other woodworkers use that type of plywood to make cabinetry

@LSLearmont Ай бұрын

The cabinet maker in me is proud of your progress and your clean work. He also started screaming internally when you put the piano hinge leaf up instead of hiding it in the seam as well. Other than that, a fine piece of work!

@gregchrist5090 Ай бұрын

I was thinking he could have used the door cabinet hinges on the inside and added cleats on the inside to carry the weight.

@johnbaker3843 Ай бұрын

I love this video !!!!👍🏿👍🏿👍🏿

@UrbanJedi Ай бұрын

Looks awesome! Very easy to add on too…

@jlautomotive6349 Ай бұрын

What an incredible project, the no fasteners is a super scukum idea!!

@coreyshortland2074 Ай бұрын

Mr W, I don't know much about cabinet making either. I have a strong interest in woodwork. Personally I would add a piece under the bench seats to that your weight isn't relying on the small screws, as part of the hinge. This may already be a part of your plan although I felt it necessary to mention.

@ofrddriftr Ай бұрын

I am glad I looked thru the comments, I was going to say the same thing. I do not use piano hinges so I am unsure of how they will hold up but I see only a handful of small screws and I worry about falling thru in time.

@Akuma122887 Ай бұрын

My only add on would be some sort of seat support on the side walls of the under seat storage area. Maybe some 1 inch thick scrap pieces that would go 3/4ths of the way to the hinge from the front of the seat. Then you could drill through the side wall's and put in some wooden pegs with glue. When you finish the locker the little wooden pegs being a different wood would show up as nice little detail to show it wasn't just slapped together with screws.

@Mathis218337 Ай бұрын

move the place where your names are going to go to the top shelf so its above the helmet instead of below. That will give you more headroom

@zachsalminen Ай бұрын

What about adding some support strips for the seats on each side inside? It looks like the strength of the seat just in the screws and hinge.

@Jasoos_Jasonda Ай бұрын

One bad idea after another. Now take it all apart and paint it lol.

@raymondpotts9569 Ай бұрын

Very well done

@One29Homestead Ай бұрын

Great job

@JangeerAkrayi Ай бұрын

this is a great design, thank you for the video. for added security and stability so that the henge does not fail over time, if you add a simple 1x4 to the sides right under where the henge is will make the seat last much longer

@dexter255 Ай бұрын

Great job! Love the videos and what a great idea 💡

@Snow-Storm-In-a-bottle Ай бұрын

Hockey style lockers. Excellent choice.

@davidbeaudry8216 Ай бұрын

Love the bigbear reference

@kellyburdette6108 Ай бұрын

Nice job 👏 👍 👌

@bravomalice7238 Ай бұрын

NICE!

@tim8767 Ай бұрын

Cheers!

@brianleya9072 Ай бұрын

Always love a good build video, Thankyou sir.

@markjones6475 Ай бұрын

Take the board from the bottom of the shelf, place it on top of the shelf. This will give you the clearance as well as adding a lip to prevent anything from accidentally being pulled off the shelf. Just my opinion and suggestion. Looks good. I’ve been planing on doing something similar as a coat rack, seat at my front door.

@charlieelderton3038 Ай бұрын

Awesome!

@WTFBazda Ай бұрын

If it were me, I'd leave a quarter inch gap between the top of the front face and bottom of the seat for extra air flow. The lip on the seat should hide the gap pretty nicely too.

@watchchannel8201 Ай бұрын

Beautiful work! My house had a roof leak and insurance covered the repair of it and continuous flooring. I bought a 5hp saw stop and am going to build my own cabinets!! If you’re ever near Coeur d’Alene Idaho, you have a place to stay!

@jollyroger6258 Ай бұрын

Looks good baby

@billbucktube Ай бұрын

Looks good

@classicmula Ай бұрын

Love it PROhO!

@delswanson3593 Ай бұрын

Very cool! One suggestion: put cleats either under each side of the seat or at the back under the hinge. I may have looked at it wrong, but it seems like the only thing holding your weight are the screws into the wood. With the amount of them there probably wouldn't be an issue, but I tend to over build stuff. Thanks for making interesting content!

@Burdolski_75 Ай бұрын

Just got off work to another great video!! Love your work man!

@HunterTN Ай бұрын

Wonder if some 1x2 runners flush with the front lip would help support the seat. Seems like the hinge could eventually become a weak point.

@urosz Ай бұрын

Excellent job. But note, on 12:45 you could have installed the hinges vertically and screw them to the sides. Would hide them and look nicer.

@david2284180 Ай бұрын

The New Yankee Workshop. < west coast style

@thejohnhend Ай бұрын

Nice work! Sometimes you surprise me!

@matthewbauer89 Ай бұрын

Some of the nicest plywood I've seen in a while.

@jonnorton9720 Ай бұрын

Should be at $165.00 pr sheet..probably cheaper to buy than build..surely not a blue collar build…must be nice..

@vcommandarv5916 Ай бұрын

@jonnorton9720 bruh you can use cheaper plywood If you truly want something you will reach it, instead you wanted to complain?? not that I would know.

@jonnorton9720 Ай бұрын

@@vcommandarv5916 not your bru…not everyone is a millionaire,don’t think it’s ANY OF YOUR BUSINESS..bru..wanna be..ever hear of the first amendment?? Bet your a liberal that try’s to bullyi anyone you don’t agree with..

@chedisLoL Ай бұрын

@@setdown2 you can get5 sheet plywood for like $70 per sheet from home depot and get a similiar product.

@joshwokojance3790 Ай бұрын

@@setdown2huh. I didn’t know that you had to be poor to homestead.

@ryanmac1 Ай бұрын

Fun fact! When Westcoast man says "super skookem", it translates to "wicked pissah" for Eastcoast man. Could also be "wicked awesome", or just "pissah". That's my New Hampshire translation lol.

@smokeythebear42o 25 күн бұрын

MUST BE NICEEE!

@tonysherwood9619 Ай бұрын

Handy giraffe manger!

@One29Homestead Ай бұрын

It's just multiple hall trees stacked together. Some of those hall trees are beautiful hardwood with simple ornate compliments. MDF is great too.

@choosetherightify Ай бұрын

very nice setup. I could definitely use it for all of my electric unicycle gear.... which is very similar to what one would wear for moto.

@twoorfour Ай бұрын

Very nice! Do you think you might need to brace the back of the seat, it looks like all the weight is hanging on the hinge when you sit on it?

@setdown2 Ай бұрын

Good point…

@ihuntdeer60 Ай бұрын

That bottom gap is perfect for mice if mama doesn’t catch ‘em

@Subsilent00 Ай бұрын

We are all on the same level playing field. Invictus, William Ernest Henley: I'm the master of my own fate! I am the captain of my soul!

@crewdalews Ай бұрын

glad to see no clogs

@thomaswypyszinski3645 Ай бұрын

Watching your video had to wait a few minutes while I did my Wim Hof breathing exercise. lol Great idea for a dressing/ undressing staging area. Would be nice for a mud room for the kids. Thank You Sir

@Lochlann13 Ай бұрын

That thumbnail displays a proper skookum West Coast power stance

@mattsquaaaared Ай бұрын

Prohogasm material right there 👌👏

@ReadyMack-g Ай бұрын

perfect

@JonArmenta Ай бұрын

Really like those cubbies as we called them in my childhood home. I think these would have been better after we got into high-school sports like lacrosse. The extra space would have kept our entryway more put together. Great build quality, and style to boot! Dare I say though I have a request. I would love to see a short even of all your drawers in your rolling Snap-On blue cart. The one you do some assembly on. I distinctly remember having seen all your sockets and wrenches sitting in. Just a quick series of the drawers. I ask because most of the tools I have acquired have come from seeing them on your channel first. While I may never join the ranks of a PROhO; I can sure try. Please and thank you.

@MrCazix Ай бұрын

Maybe a stop block under each side of the lid, take a little strain off the hinge. Looks good 👍

@EagleRun23 Ай бұрын

comes up with clever solutions to the lack of proper planning, cuts to pocket hole jig scene, hahahahahahahaha love it brother!

@My12521252 Ай бұрын

So cool!! I'll be adding a set to my future shop (God willing) Just a thought.. what about adding a hidden dehumidifier to blow dried air through the bottom storage and some glove dryers and maybe a vent for the helmets too? They look great!

@adoynowknows2 Ай бұрын

I would be tempted to try one with the hinge on the front such that it opened forward instead.

@theeagle8652 Ай бұрын

This is Proho definition 👏

@billhatcher2984 Ай бұрын

A long time ago i made a decision that unless i wanted the top of a tall cabinet to be for long term storage then i would put a small slope on the top so if you want to set something on top for a temporary amount of time it will sit but with the slope its not a good place to just leave something with the slope its visable and you have to place things up there if its just tossed it might not stay but the best thing is its visible

@johndunbar2393 Ай бұрын

Dang ProHo, I felt that Hemingway quote. Not that often anymore, does a quote hit me like a ton of bricks, but that one did.

@lawsonium Ай бұрын

Hinges might want to be screwed to the edges of the boards. They'll be stronger to support the weight of someone sitting on them and also be less visible.

@TheSnakeman3 Ай бұрын

That is some very good work. I would’ve liked to have seen how you hid all the nails.

@sokoloft3 Ай бұрын

The shape of it is almost close to a arcade cabinet. I need something for all the electronics I work on, spare circuit boards etc. Wont work for me but seems like a good idea for the gear you mentioned.